journal article·2017-02Open access

Influence of TiO2 compact layer precursor on the performance of perovskite solar cells

Paola Vivo, Anniina Ojanperä, Jan-Henrik Smått, Simon Sandén, Syed Ghufran Hashmi, Kimmo Kaunisto, Petri Ihalainen, Muhammad Talha Masood, Ronald Österbacka, Peter D. Lund, Helge Lemmetyinen

Abstract

The optimization of the hole-blocking layer in perovskite solar cells (PSC), typically based on TiO2, is crucial, as it strongly affects the device performance. In this work, we thoroughly characterize the thickness, roughness, and crystal structure of a set of TiO2 compact layers produced by spin coating of different precursor sols and correlate the choice of the TiO2 precursor to the photovoltaic performance of the PSC. By replacing the commonly used titanium isopropoxide (TTIP) blocking layer precursor with titanium tetrachloride (TiCl4), a clear enhancement in the PSC performance was observed, particularly in the hysteresis behavior and stability. The results from the morphological/structural analysis and transient photoluminescence studies clarify the different behavior of the compact layers in PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%
2. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
3. Best Research Cell-Efficiencies · 2016
4. Current challenges and prospective research for upscaling hybrid perovskite photovoltaics10.1021/acs.jpclett.5b02651 ↗
5. Technical and economic assessment of perovskite solar cells for large scale manufacturing10.1063/1.4927329 ↗
6. Ionic polarization-induced current–voltage hysteresis in CH3NH3PbX3 perovskite solar cells
7. Beyond Efficiency: the challenge of stability in mesoscopic perovskite solar cells10.1002/aenm.201501066 ↗
8. TiO2 quantum dots as superb compact block layers for high-performance CH3NH3PbI3 perovskite solar cells with an efficiency of 16.97%10.1039/C5NR05563F ↗
9. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
10. Improve efficiency of perovskite solar cells by using Magnesium doped ZnO and TiO2 compact layers10.1016/j.spmi.2016.01.026 ↗
11. Highly compact TiO2 layer for efficient hole-blocking in perovskite solar cells10.7567/APEX.7.052301 ↗
12. Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency10.1039/C3EE43707H ↗
13. Electrodeposited Ultrathin TiO2 blocking layers for efficient perovskite solar cells10.1038/srep16098 ↗
14. A facile and low-cost fabrication of TiO2 compact layer for efficient perovskite solar cells10.1016/j.cap.2015.01.028 ↗
15. Influence of compact TiO2 layer on the photovoltaic characteristics of the organometal halide perovskite-based solar cells10.1016/j.mssp.2014.07.039 ↗
16. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
17. Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer10.1039/C5TA04239A ↗
18. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗
19. Engineering of electron-selective contact for perovskite solar cells with efficiency exceeding 15%10.1021/nn5029828 ↗
20. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
21. Loading of mesoporous titania films by CH3NH3PbI3 perovskite, single step vs. sequential deposition10.1039/C4CC09556A ↗
22. Electrochemical characterization of TiO2 blocking layers for dye-sensitized solar cells10.1021/jp4103614 ↗
23. Atomic layer deposition of TiO2 for a high-efficiency hole-blocking layer in hole-conductor-free perovskite solar cells processed in ambient air10.1021/acsami.6b02701 ↗
24. Low-Temperature crystalline titanium dioxide by atomic layer deposition for dye-sensitized solar cells10.1021/am400866s ↗
25. Deposition of a thin film of TiOx from a titanium metal target as novel blocking layers at conducting glass/TiO2 interfaces in ionic liquid mesoscopic TiO2 dye-sensitized solar cells10.1021/jp064327j ↗
26. Perovskite solar cell with an efficient TiO2 compact film10.1021/am503728d ↗
27. Hydrolysis preparation of the compact TiO2 layer using metastable TiCl4 isopropanol/water solution for inorganic–organic hybrid heterojunction perovskite solar cells10.1088/1674-4926/36/7/074003 ↗
28. Low-Temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells10.1021/nl403997a ↗
29. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
30. Semi-transparent perovskite solar cells for tandems with silicon and CIGS10.1039/C4EE03322A ↗
31. Atmospheric influence upon crystallization and electronic disorder and its impact on the photophysical properties of organic–inorganic perovskite solar cells10.1021/nn506465n ↗
32. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
33. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C6010.1063/1.1895473 ↗
34. Stark effect in perovskite/TiO2 solar cells: evidence of local interfacial order10.1021/nl500544c ↗
35. Well-organized mesoporous TiO2 photoelectrodes by block copolymer-induced sol–gel assembly for inorganic–organic hybrid perovskite solar cells10.1021/jp412655p ↗
36. Simultaneous observation of an intraband transition and distinct transient species in the infrared region for perovskite solar cells10.1021/acs.jpclett.6b01111 ↗
37. Resonance Raman excitation energy dependent charge transfer mechanism in halide-substituted hybrid perovskite solar cells10.1021/nn507345e ↗
38. Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiro-OMeTAD/Co-complex as hole-transporting material10.1039/c3ta12681a ↗
39. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
40. Controlling CH3NH3PbI3–xClx film morphology with two-step annealing method for efficient hybrid perovskite solar cells10.1021/acsami.5b03324 ↗
41. Planar CH3NH3PbBr3 hybrid solar cells with 10.4% power conversion efficiency, fabricated by controlled crystallization in the spin-coating process10.1002/adma.201403140 ↗
42. Photovoltaics. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
43. Enhanced charge collection with passivation layers in perovskite solar cells10.1002/adma.201505140 ↗
44. Enhanced efficiency and stability of perovskite solar cells through Nd-Doping of mesostructured TiO210.1002/aenm.201501868 ↗
45. Photovoltaic and amplified spontaneous emission studies of high-quality formamidinium lead bromide perovskite films10.1002/adfm.201504977 ↗
46. Identifying fundamental limitations in halide perovskite solar cells10.1002/adma.201505480 ↗
47. Interface and composition analysis on perovskite solar cells10.1021/acsami.5b08038 ↗
48. Growing perovskite into polymers for easy-processable optoelectronic devices10.1038/srep07725 ↗
49. High-Performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
50. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
51. 15.76% efficiency perovskite solar cells prepared under high relative humidity: importance of PbI2 morphology in two-step deposition of CH3NH3PbI310.1039/C5TA00658A ↗
52. Origin of J–V hysteresis in perovskite solar cells10.1021/acs.jpclett.6b00215 ↗
53. The Interface between FTO and the TiO2 compact layer can be one of the origins to hysteresis in planar heterojunction perovskite solar cells10.1021/acsami.5b01789 ↗
54. Zhang · Chem. Mater. · 2016 · 28 · 80210.1021/acs.chemmater.5b04019 ↗
55. Control of I–V hysteresis in CH3NH3PbI3 perovskite solar cell10.1021/acs.jpclett.5b02273 ↗
56. De Jonghe · 2003 · vol. 1 · 87
57. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗