journal article·2014-11

Donor–acceptor copolymers based on benzo[1,2- b :4,5- b ′]dithiophene and pyrene-fused phenazine for high-performance polymer solar cells

Qunping Fan, Yu Liu, Manjun Xiao, Hua Tan, Yafei Wang, Wenyan Su, Delong Yu, Renqiang Yang, Weiguo Zhu

Organic Electronics· Volume 15· Issue 11
Publisher page

Abstract

Two novel donor-acceptor (D-A)-type conjugated polymers of PTTPPz-BDT and PTTPPz-BDTT were successfully synthesized by Stille coupling polymerization, in which 7,8-dialkoxy benzo[1,2-b:4,5-b']dithiophene (BDT) and 7,8-bithienyl benzo[1,2-b:4,5-b']dithiophene (BDTT) were used as donor units, thiophene and pyrene-fused phenazine (PPz) were employed as pi-bridges and acceptor units, respectively. High carrier mobilities, broad absorption spectra, narrow optical band gaps, and low HOMO energy levels were observed for both polymers. Furthermore, high-efficiency photovoltaic performance with power conversion efficiency (PCE) over 4.25% was exhibited in their polymer solar cells (PSCs) using [6,6]-phenyl-C-71-butyric-acid-methyl-ester (PC71BM) as acceptor. The maximum PCE of 4.86% with short-circuit current density of 11.10 mA cm(-2) and fill factor of 62.5% was obtained in the PTTPPz-BDTT based cell. These results indicate that incorporating large planar PPz moiety into D-A-type copolymer is an efficient approach to improve photovoltaic performance for PSCs. (C) 2014 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
3. Enhanced power conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. Polymers for electronics and spintronics10.1039/c3cs60257e ↗
5. Toward printed integrated circuits based on unipolar or ambipolar polymer semiconductors10.1002/adma.201205361 ↗
6. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
7. 10.2% Power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
8. Design, synthesis, and structure-property relationships ofisoindigo-based conjugated polymers10.1021/ar400254j ↗
9. Halogen-free solvent processing for sustainable development of high efficiency organic solar cells10.1016/j.orgel.2012.08.026 ↗
10. Synthesis and photovoltaic properties of D–A copolymers based on 11,12-difluorodibenzo[a, c]phenazine acceptor unit10.1002/macp.201300299 ↗
11. Tuning the donor–acceptor strength of low-bandgap platinum-acetylide polymers for near-infrared photovoltaic applications10.1002/marc.201100247 ↗
12. How the linkage positions affect the performance of bulk-heterojunction polymer solar cells10.1039/c2jm32002a ↗
13. Indacenodithiophene and quinoxaline-based conjugated polymers for highly efficient polymer solar cells10.1021/cm200316s ↗
14. Synthesis of quinoxaline-based donor–acceptor narrow- band-gap polymers and their cyclized derivatives for bulk-heterojunction polymer solar cell applications10.1021/ma1027164 ↗
15. A new low-bandgap polymer containing benzene-fused quinoxaline: significantly enhanced performance caused by one additional benzene ring10.1002/marc.201200623 ↗
16. Synthesis, characterization and photovoltaic performances of D–A copolymers based on BDT and DBPz: the largely improved performance caused by additional thiophene blocks10.1039/c3ta01305g ↗
17. Correlation of intramolecular charge transfer and orientation properties among quinacridone and acceptor units10.1016/j.solmat.2013.12.004 ↗
18. Incorporation of pyrene units to improve hole mobility in conjugated polymers for organic solar cells10.1021/ma301877q ↗
19. Asymmetric pyrene derivatives for organic field-effect transistors10.1039/c1cc11827g ↗
20. Effect of molecular packing on field-effect performance of single crystals of thienyl-substituted pyrenes10.1021/cm703499q ↗
21. 1-Imino nitroxide pyrene for high performance organic field-effect transistors with low operating voltage10.1021/ja064580x ↗
22. Acetylene-bridged D–A–D type small molecule comprising pyrene and diketopyrrolopyrrole for high efficiency organic solar cells10.1016/j.orgel.2013.05.035 ↗
23. Solution-processed bulk-heterojunction solar cells containing self organized disk-shaped donors10.1021/am301905m ↗
24. Donor- acceptor copolymers incorporating polybenzo[1,2-b:4,5-b′]dithiophene and tetrazine for high open circuit voltage polymer solar cells10.1016/j.orgel.2013.05.015 ↗
25. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
26. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
27. Thieno- [3,2-b]thiophene-substituted benzo[1,2-b:4,5-b′]dithiophene as a promising building block for low bandgap semiconducting polymers for high-performance single and tandem organic photovoltaic cells10.1021/cm4035903 ↗
28. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
29. A benzoselenadiazole-based low band gap polymer: synthesis and photovoltaic application10.1021/ma302596k ↗
30. Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment10.1021/cm401618h ↗
31. Enhancing photovoltaic performance of copolymers containing thiophene unit with D–A conjugated side chain by rational molecular design10.1021/ma401886a ↗
32. Fluorinated benzoselenadiazole-based low-band-gap polymers for high efficiency inverted single and tandem organic photovoltaic cells10.1021/ma4026493 ↗
33. Conjugated moiety effect on blend film phase separation and photovoltaic properties of benzo[1,2-b:4,5-b′]dithiophene-containing coplanar donor–acceptor copolymers10.1016/j.solmat.2012.09.023 ↗
34. Ruthenium(III) chloride catalyzed oxidation of pyrene and 2,7-disubstitued pyrenes: an efficient, one-step synthesis of pyrene-4,5-diones and pyrene-4,5,9,10-tetraones10.1021/jo048509q ↗
35. A novel benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymer with a pendant diketopyrrolopyrrole unit for high-performance solar cells10.1021/ma302243r ↗
36. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole-based polymer solar cells10.1002/adma.201304360 ↗
37. Application of two-dimensional conjugated benzo[1,2-b:4,5-b’] dithiophene in quinoxaline-based photovoltaic polymers10.1021/ma300060z ↗
38. New alkylfuranyl-substituted benzo[1,2-b:4,5-b′]dithiophene-based donor–acceptor polymers for highly efficient solar cells10.1021/ma3025738 ↗
39. Donor–acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high- performance polymer solar cells10.1021/ja201131h ↗
40. Enhanced photocurrent generation by high molecular weight random copolymer consisting of benzothiadiazole and quinoxaline as donor materials10.1016/j.solmat.2013.08.021 ↗