Novel development towards preparation of highly efficient ionic liquid based co-polymer electrolytes and its application in dye-sensitized solar cells
Source abstract
Abstract
Ionic liquid polymer electrolytes (ILPE) were prepared with poly(1-vinylpyrrolidone-co-vinylacetate) P(VP-co-VAc) copolymer , tetrahexylammonium iodide (THAI) salt and 1-butyl-3-methylimidazolium iodide (BMII), a room temperature ionic liquid (RTIL). The ILPEs were characterized using electrochemical impedance spectroscopy (EIS) analysis, X-ray diffraction (XRD) studies, Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric analysis (TGA). The highest ionic conductivity obtained was 1.05 × 10 −3 S cm −1 at room temperature in ILPE3 which is the sample incorporated with 80 wt% of BMII. FTIR analysis proved the formation of complexes in between the copolymer , salt and ionic liquid. XRD studies have shown that ILPE3 has the optimum amorphous nature. The ILPE based dye sensitized solar cell (DSSC) was assembled by sandwiching the ILPE in between the nanoporous TiO 2 working electrode and Pt-coated counter electrode and thus subjected to device photovoltaic characterization. The DSSC with ILPE3 as its electrolyte has shown the highest power conversion efficiency ( η ) with a value of 4.93% with short circuit current density ( J sc ), open circuit voltage (V oc ) and fill factor ( FF ) of 12.37 mA cm −2 , 0.69 V and 0.58, respectively. Temperature dependence studies has been done on the DSSCs to understand effect of the cell temperature on the performances of the DSSCs. EIS studies of the DSSCs shows that the ILPE is having higher diffusion coefficient compared to the GPE .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Photoinduced polymerization: an innovative, powerful and environmentally friendly technique for the preparation of polymer electrolytes for dye-sensitized solar cells10.1016/j.jphotochemrev.2013.03.002 ↗
2. Novel near-infrared squaraine sensitizers for stable and efficient dye-sensitized solar cells10.1002/adfm.201303769 ↗
3. Molecular engineering of new thienyl-bodipy dyes for highly efficient panchromatic sensitized solar cells10.1002/aenm.201400085 ↗
4. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
5. A novel D-A-π-A organic sensitizer containing a diketopyrrolopyrrole unit with a branched alkyl chain for highly efficient and stable dye-sensitized solar cells10.1039/c2cc31998e ↗
6. Tetrahexylammonium iodide containing solid and gel polymer electrolytes for dye sensitized solar cells10.1016/j.egypro.2011.12.1140 ↗
7. Improved performance using a plasticized polymer electrolyte for quasi-solid state dye-sensitized solar cells10.1016/j.electacta.2012.04.061 ↗
8. Dye-sensitized solar cell with poly(acrylic acid-co-acrylonitrile)-based gel polymer electrolyte10.1016/j.matchemphys.2011.12.048 ↗
9. Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
10. Photovoltaic technology: the case for thin-film solar cells10.1126/science.285.5428.692 ↗
11. Conductivity, dielectric behaviour and thermal stability studies of lithium ion dissociation in poly (methyl methacrylate)-based gel polymer electrolytes10.1007/s11581-008-0268-2 ↗
12. Correlation between ionic conductivity and cell performance in solid-state dye-sensitized solar cells employing polymer electrolyte10.1016/j.jphotochem.2010.02.014 ↗
13. Gel-type polymer electrolytes with different types of ceramic fillers and lithium salts for lithium-ion polymer batteries10.1016/j.jpowsour.2005.06.018 ↗
14. Ion conducting corn starch biopolymer electrolytes doped with ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate10.1016/j.jnoncrysol.2011.06.030 ↗
15. Ionic conductivity and thermal property of solid hybrid polymer electrolyte composed of oligo(ethylene oxide) unit and butyrolactone unit10.1016/j.jpowsour.2007.11.088 ↗
16. A polymer gel electrolyte composed of a poly(ethylene oxide) copolymer and the influence of its composition on the dynamics and performance of dye-sensitized solar cells10.1016/j.jpowsour.2009.09.008 ↗
17. Solid- state dye-sensitized solar cells: improved performance and stability using a plasticized polymer electrolyte10.1016/j.jphotochem.2005.11.028 ↗
18. Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly(vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte10.1016/j.ssi.2016.03.008 ↗
19. Influence of polymer concentration and dyes on photovoltaic performance of dye-sensitized solar cells with P(VdF-HFP)-based gel polymer electrolyte10.1016/j.jpowsour.2008.06.063 ↗
20. Efficiency improvement by incorporating 1-methyl-3-propylimidazolium iodide ionic liquid in gel polymer electrolytes for dye-sensitized solar cells10.1016/j.electacta.2015.01.076 ↗
21. Effect of salts on the fumed silica-based composite polymer electrolytes10.1016/j.solmat.2007.03.036 ↗
22. Compositional effect of PVdF–PEMA blend gel polymer electrolytes for lithium polymer batteries10.1016/j.eurpolymj.2007.08.001 ↗
23. Water absorption and states of water in semicrystalline poly(vinyl alcohol) film10.1016/0032-3861(96)81134-7 ↗
24. Electrical studies of gel polymer electrolyte based on PAN for electrochemical cell applications10.1016/j.matpr.2016.01.112 ↗
25. Blends of hydroxypropyl methylcellulose and poly(1-vinylpyrrolidone-co-vinyl acetate): miscibility and thermal stability10.1016/j.polymdegradstab.2005.02.010 ↗
26. Effect of different iodide salts on ionic conductivity and structural and thermal behavior of rise-starch-based polymer electrolytes for dye-sensitized solar cell application10.1007/s11581-015-1385-3 ↗
27. The potential of incorporation of binary salts and ionic liquid in P(VP-co-VAc) gel polymer electrolyte in electrochemical and photovoltaic performances10.1038/srep27630 ↗
28. FTIR, XRD and ac impedance spectroscopic study on PVA based polymer electrolyte doped with NH4X (X = Cl, Br, I)10.1016/j.jnoncrysol.2008.10.009 ↗
29. Laser Raman and FTIR studies on Li+ interaction in PVAc-LiClO4 polymer electrolytes10.1016/j.saa.2006.02.026 ↗
30. Investigations on electrical properties of PVP: KIO4 polymer electrolyte films10.1016/j.solidstatesciences.2013.02.006 ↗
31. Studies on electrical and dielectric properties of PVP: KBrO4 complexed polymer electrolyte film10.1016/j.matchemphys.2011.07.006 ↗
32. Vibrational and impedance spectroscopic study on PVP–NH4SCN based polymer electrolytes10.1016/j.physb.2006.11.021 ↗
33. Full-ionic liquid gel electrolytes: enhanced photovoltaic performances in dye-sensitized solar cells10.1016/j.jpowsour.2014.04.095 ↗
34. Plasticizer doped ionic liquid incorporated solid polymer electrolytes for photovoltaic application10.1016/j.cap.2010.10.012 ↗
35. Electrochemical properties of dye-sensitized solar cells fabricated with PVDF-type polymeric solid electrolytes10.1016/j.jphotochem.2003.12.021 ↗
36. The role of gel electrolyte composition in the kinetics and performance of dye-sensitized solar cells10.1016/j.electacta.2008.05.009 ↗
37. The effect of various concentrations of PVDF-HFP polymer gel electrolyte for dye-sensitized solar cell10.1016/j.microrel.2015.09.015 ↗
38. Preparation of nano-composite gel electrolytes with metal oxide additives for dye-sensitized solar cells10.1016/j.electacta.2016.07.009 ↗
39. Preparation of iodine-free ionic liquid gel electrolyte using polyethylene oxide (PEO)-polyethylene glycol (PEG) and its application in Ti-foil-based dye-sensitized solar cells10.1016/j.electacta.2016.03.197 ↗
40. Effect of varying illumination and temperature on steady-state and dynamic parameters of dye-sensitized solar cell using AC impedance modeling10.1155/2013/646407 ↗
41. Temperature dependence and the oscillatory behavior of the opto-electronic properties of a dye-sensitized nanocrystalline TiO2 solar cell10.1016/j.solmat.2003.11.011 ↗
42. Light intensity, temperature, and thickness dependence of the open-circuit voltage in solid-state dye-sensitized solar cells10.1103/PhysRevB.74.045306 ↗
43. Electronic transport in dye-sensitized nanoporous TiO2 solar cells - comparison of electrolyte and solid-state devices10.1021/jp0222144 ↗
44. Performance of dye-sensitized solar cells based on Ionic liquids: effect of temperature and iodine concentration10.1016/j.tsf.2007.12.003 ↗
45. The effect of temperature on the performance of dye-sensitized solar cells based on a propyl-methyl-imidazolium iodide electrolyte10.1016/j.solmat.2007.02.001 ↗
46. Insight into electrochemical properties of Co3O4–modified magnetic polymer electrolyte10.1016/j.electacta.2014.08.097 ↗
47. Printable electrolytes for highly efficient quasi-solid-state dye-sensitized solar cells10.1016/j.electacta.2012.12.096 ↗
48. Highly efficient dye-sensitized solar cell with a ZnO nanosheet-based photoanode10.1039/c0ee00587h ↗
49. Determination of parameters of electron transport in dye-sensitized solar cells using electrochemical impedance spectroscopy10.1021/jp061693u ↗
50. Electrophoretic deposition of TiO2 film on titanium foil for a flexible dye-sensitized solar cell
51. High performance dye-sensitized solar cells with record open circuit voltage using tin oxide nanoflowers developed by electrospinning10.1039/C1EE02703D ↗