Modification of interface between PEDOT:PSS and perovskite film inserting an ultrathin LiF layer for enhancing efficiency of perovskite light-emitting diodes
Source abstract
Abstract
Abstract PEDOT:PSS has been widely used in perovskite light-emitting diodes (PeLEDs) due to its high hole current conductivity and work function. However, the unbalanced charge injection and severe exciton quenching in PEDOT:PSS restrict the EL performance of PeLEDs. In this work, a facile interface modification method is introduced in which an ultrathin LiF layer is inserted at the interface between PEDOT:PSS and MAPBBr3 perovskite film. Our results indicate that the inserted ultrathin LiF layer contributes to an efficient interface passivation effect between the PEDOT:PSS layer and the perovskite film, which significantly suppresses both the exciton quenching by the conductive PEDOT chains and the perovskite film defect density at the interface. Moreover, balanced charge injection is realized by adjusting the thickness of the LiF layer, which also serves as an electron blocking layer, in order to preferentially hinder electron current over hole current. Consequently, the optimal PeLED with a 2 nm LiF layer exhibits a significantly decreased turn-on voltage of 2.8 V compared to 4.9 V of the pristine device without a LiF layer, combined with an over 100-fold enhancement in the maximum luminance (10415 cd/m2), current efficiency (12.1 cd/A), and external quantum efficiency (3.5%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
2. Modulation of recombination zone position for quasi-two-dimensional blue perovskite light-emitting diodes with efficiency exceeding 5%10.1038/s41467-019-09011-5 ↗
3. Highly efficient and water-stable lead halide perovskite quantum dots using superhydrophobic aerogel inorganic matrix for white light-emitting diodes10.1002/admt.201900941 ↗
4. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
5. Electronic structure of nonionic surfactant-modified PEDOT:PSS and its application in perovskite solar cells with reduced interface recombination10.1021/acsami.9b01545 ↗
6. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
7. Solution-processed hybrid perovskite photodetectors with high detectivity10.1038/ncomms6404 ↗
8. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films10.1016/j.solmat.2017.08.014 ↗
9. A self-powered and flexible organometallic halide perovskite photodetector with very high detectivity10.1002/adma.201704611 ↗
10. Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures10.1038/s41586-018-0576-2 ↗
11. Efficient perovskite light‐emitting diodes using polycrystalline core–shell‐mimicked nanograins10.1002/adfm.201902017 ↗
12. Efficient metal halide perovskite light-emitting diodes with significantly improved light extraction on nanophotonic substrates10.1038/s41467-019-08561-y ↗
13. Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent10.1038/s41586-018-0575-3 ↗
14. Rational molecular passivation for high-performance perovskite light-emitting diodes10.1038/s41566-019-0390-x ↗
15. Investigation of light-extraction mechanisms of multiscale patterned arrays with rough morphology for GaN-based thin-film LEDs10.1109/ACCESS.2019.2921058 ↗
16. Effect of bathocuproine organic additive on optoelectronic properties of highly efficient methylammonium lead bromide perovskite light-emitting diodes10.1021/acsaem.8b01410 ↗
17. Improved performance of perovskite light-emitting diodes by dual passivation with an ionic additive10.1021/acsaem.9b00186 ↗
18. Boosting perovskite light-emitting diode performance via tailoring interfacial contact, acs applied materials & interfaces10.1021/acsami.8b07438 ↗
19. Enhanced performance of perovskite light-emitting diodes via diamine interface modification10.1021/acsami.9b11866 ↗
20. Conjugated polyelectrolytes as efficient hole transport layers in perovskite light-emitting diodes10.1021/acsnano.8b01715 ↗
21. Suppression of non-radiative recombination toward high efficiency perovskite light-emitting diodes10.1063/1.5064370 ↗
22. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
23. Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells10.1039/C5NR05271H ↗
24. Nearly 100% efficiency enhancement of CH3NH3PbBr3 perovskite light-emitting diodes by utilizing plasmonic Au nanoparticles10.1021/acs.jpclett.7b01562 ↗
25. High performance and stable all-inorganic perovskite light emitting diodes by reducing luminescence quenching at PEDOT:PSS/Perovskites interface10.1016/j.orgel.2018.10.014 ↗
26. All-solution-Processed pure formamidinium-based perovskite light-emitting diodes
27. Modified conducting polymer hole injection layer for high-efficiency perovskite light-emitting devices: enhanced hole injection and reduced luminescence quenching10.1021/acs.jpclett.7b01992 ↗
28. Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes10.1039/C6NR08158D ↗
29. Interfacial engineering for highly efficient quasi-two dimensional organic–inorganic hybrid perovskite light-emitting diodes10.1039/C8TC06490C ↗
30. Optical-electrical-chemical engineering of PEDOT:PSS by incorporation of hydrophobic nafion for efficient and stable perovskite solar cells10.1021/acsami.7b19053 ↗
31. High brightness and enhanced stability of CsPbBr3-based perovskite light-emitting diodes by morphology and interface engineering10.1002/adom.201801245 ↗
32. Ideal conducting polymer anode for perovskite light-emitting diodes by molecular interaction decoupling10.1016/j.nanoen.2019.03.030 ↗
33. Hybrid perovskite light-emitting diodes based on perovskite nanocrystals with organic-inorganic mixed cations10.1002/adma.201606405 ↗
34. Efficient perovskite light-emitting diodes: effect of composition, morphology, and transport layers10.1021/acsami.8b15718 ↗
35. Room-temperature triple-ligand surface engineering synergistically boosts ink stability, recombination dynamics, and charge injection toward EQE-11.6% perovskite QLEDs10.1002/adma.201800764 ↗
36. Self-assembled high quality CsPbBr3 quantum dot films toward highly efficient light-emitting diodes10.1021/acsnano.8b05185 ↗
37. A 1300 mm(2) ultrahigh-performance digital imaging assembly using high-quality perovskite single crystals10.1002/adma.201707314 ↗
38. Dual role of LiF as a hole-injection buffer in organic light-emitting diodes10.1063/1.1396819 ↗
39. Lithium-fluoride-modified indium tin oxide anode for enhanced carrier injection in phenyl-substituted polymer electroluminescent devices10.1063/1.1695444 ↗
40. A strategy for architecture design of crystalline perovskite light-emitting diodes with high performance10.1002/adma.201800251 ↗
41. Metal halide perovskite light‐emitting devices: promising Technology for next‐generation displays10.1002/adfm.201902008 ↗