journal article·2017-02

Triphenylamine-cored star-shape compounds as non-fullerene acceptor for high-efficiency organic solar cells: Tuning the optoelectronic properties by S/Se-annulated perylene diimide

Zhenghui Luo, Wentao Xiong, Tao Liu, Wangli Cheng, Kailong Wu, Yanming Sun, Chuluo Yang

Publisher page

Abstract

Abstract Three novel star-shaped S/Se-annulated perylene diimide (PDI) small molecule acceptors with triphenylamine as the core, namely TPA-PDI, TPA-PDI-S and TPA-PDI-Se, were designed and synthesized. Using the wideband-gap polymer PDBT-T1 as the donor and Se-annulated perylene diimide (TPA-PDI-Se) as the acceptor, power conversion efficiencies (PCE) of up to 6.10% was achieved, which is 38% higher than the reference of TPA-PDI without heteroatom annulation. Impressively, the S/Se-annulated perylene diimides as acceptors showed high open-circuit voltage (VOC) of 1.00 V. The high efficiency for TPA-PDI-Se can be attributed to complementary absorption spectra with the donor material, relatively high-lying LUMO level, balanced carrier transport and favorable morphologies. To the best of our knowledge, this PCE of 6.10% is among the highest values based on star-shaped non-fullerene acceptors so far.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
2. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
4. Dithieno[3,2-b:2’,3’-d]pyridin-5(4H)-one based D-A type copolymers with wide bandgap up to 2.05 eV to achieve solar cell efficiency up to 7.33%10.1039/C6SC01791F ↗
5. Dithieno [3, 2-b: 2′, 3′-d] pyridin-5 (4 H)-one-based polymers with a bandgap up to 2.02 eV for high performance field-effect transistors and polymer solar cells with an open-circuit voltage up to 0.98 V and an efficiency up to 6.84%10.1039/C5TA06111C ↗
6. Benzo [1, 2-b: 4, 5-b′] dithiophene and Thieno [3, 4-c] pyrrole-4, 6-dione based donor-π-acceptor conjugated polymers for high performance solar cells by rational structure modulation10.1021/acs.macromol.5b00251 ↗
7. High-performance non-fullerene organic solar cells based on a selenium-containing polymer donor and a twisted perylene bisimide acceptor
8. Polymer photovoltiac cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
9. Highly efficient tandem polymer solar cells with a photovoltaic response in the visible light range10.1002/adma.201404525 ↗
10. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
11. Novel donor–acceptor polymers based on 7-perfluorophenyl-6H-[1,2,5]thiadiazole[3,4-g]-benzoimidazole for bulk heterojunction solar cells10.1039/C5RA05849J ↗
12. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
13. An electron acceptor based on indacenodithiophene and 1, 1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
14. Beyond fullerenes: design of nonfullerene acceptors for efficient organic photovoltaics10.1021/ja508472j ↗
15. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
16. A non-fullerene small molecule as efficient electron acceptor in organic bulk heterojunction solar cells10.1002/adma.201103927 ↗
17. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
18. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
19. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
20. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
21. A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells10.1039/C5TC00865D ↗
22. Cooperative effects of solvent and polymer acceptor co-additives in P3HT: PDI solar cells: simultaneous optimization in lateral and vertical phase separation10.1039/c3cp55075c ↗
23. Rylene and related diimides for organic electronics10.1002/adma.201001402 ↗
24. Conjugated polymer blends: linking film morphology to performance of light emitting diodes and photodiodes10.1088/0953-8984/14/47/301 ↗
25. Non-fullerene organic solar cells with 6.1% efficiency through fine tuning parameters of the film-forming process10.1021/cm504140c ↗
26. Benzodithiophene bridged dimeric perylene diimide amphiphiles as efficient solution-processed nonfullerene small molecules10.1039/c3py00457k ↗
27. A selenophenyl bridged perylene diimide dimer as an efficient solution-processable small molecule acceptor10.1039/C4CC08457H ↗
28. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
29. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
30. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
31. Nonplanar perylene diimides as potential alternatives to fullerenes in organic solar cells10.1021/jz301047d ↗
32. Charge generation and transport in efficient organic bulk heterojunction solar cells with a perylene acceptor10.1039/C3EE42484G ↗
33. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 710.1021/jacs.5b06414 ↗
34. High-performance solution-processed non-fullerene organic solar cells Based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
35. Perylene diimide trimers based bulk heterojunction organic solar cells with efficiency over 7%10.1002/aenm.201600060 ↗
36. Covalently bound clusters of alpha-substituted PDI-rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
37. A star-shaped perylene diimide electron acceptor for high-performance Organic Solar Cells10.1002/adma.201400525 ↗
38. A nonfullerene small molecule acceptor with 3D interlocking geometry enabling efficient organic solar cells10.1002/adma.201504010 ↗
39. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
40. A 9, 9′-spirobi [9 H-fluorene]-cored perylenediimide derivative and its application in organic solar cells as a non-fullerene acceptor10.1039/C5CC08484A ↗
41. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
42. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
43. A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V10.1039/c2cc31511d ↗
44. A star-shaped electron acceptor based on 5,5′-bibenzothiadiazole for solution processed solar cells10.1039/c3ta13747c ↗
45. A simple perylene diimide derivative with a highly twisted geometry as an electron acceptor for efficient organic solar cells
46. π-Extended rigid triptycene-trisaroylenimidazoles as electron acceptors10.1039/C5CC07238G ↗
47. Efficient truxenone-based acceptors for organic photovoltaics10.1039/C2TA00548D ↗
48. Decacyclene Triimides: paving the road to universal non-fullerene acceptors for organic photovoltaics10.1002/aenm.201301007 ↗
49. Slip-stacked perylenediimides as an alternative strategy for high efficiency nonfullerene acceptors in organic photovoltaics10.1021/ja508814z ↗
50. Heteroarenes as high performance organic semiconductors10.1039/c3cs60108k ↗
51. Solution-processed, high-performance nanoribbon transistors based on dithioperylene10.1021/ja107599r ↗
52. Tri-N-annulated hexarylene: an approach to well-defined graphene nanoribbons with large dipoles10.1021/ja100276x ↗
53. High-performance transistor based on individual single-crystalline micrometer wire of perylo [1, 12-b, c, d] thiophene10.1021/ja068079g ↗
54. From non-detectable to decent: replacement of oxygen with sulfur in naphthalene diimide boosts electron transport in organic thin-film transistors (OTFT)10.1039/C5TC01519G ↗
55. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
56. Ternary organic solar cells based on two highly efficient polymer donors with enhanced power conversion efficiency
57. Organic solar cells based on a 2D benzo [1, 2-b: 4, 5-b′] difuran-conjugated polymer with high-power conversion efficiency10.1002/adma.201503023 ↗
58. In situ electrochemical deposition and doping of C60 films applied to high-performance inverted organic photovoltaics10.1002/adma.201202569 ↗
59. Performance optimization of low-temperature-annealed solution-processable ZnO buffer layers for inverted polymer solar cells10.1039/c3ta10637c ↗