Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells
Source abstract
Abstract
Abstract Anti-solvent assisted crystallization is commonly employed method to achieve high-quality perovskites attributed to its great operability. Herein, we report an anti-solvent engineering approach via simply using potassium bromide (KBr) additive with commonly used chlorobenzene (CB) in triple-cation perovskite solar cells (PSCs). We show that the KBr additive in the CB anti-solvent not only increases the crystallinity and passivates the perovskite top surface defects, but also leads to suppressed nonradiative recombination and facilitates charge extraction at interfaces. Interestingly, due to the halide vacancies filling with K+ ions, hysteresis behavior in the treated perovskite layer was suppressed. Consequently, a champion power conversion efficiency (PCE) of 18.29% was yielded for anti-solvent engineering employing KBr (an 20% improvement in PCE compared to the CB-only anti-solvent device). Furthermore, the optimized device based on KBr demonstrated improved stability, maintaining 80% of its original efficiency after aging in an environment with a relative humidity of 30–50% for 1080 h. Our study reports the significant role of anti-solvent engineering in improving perovskite's quality for efficient PSCs and develops the potential for PSC commercialization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A novel 3-methylthiophene additive to boost the performance and stability of perovskite solar cells10.1039/D1RA01236C ↗
2. Sustainable solvent selection for the manufacture of methylammonium lead triiodide (MAPbI 3) perovskite solar cells10.1039/D1GC00079A ↗
3. Enhanced efficiency and stability of perovskite solar cell by adding polymer mixture in perovskite photoactive layer10.1016/j.jallcom.2021.158793 ↗
4. High-performance fully-ambient air processed perovskite solar cells using solvent additive10.1016/j.jpcs.2020.109792 ↗
5. High‐performance perovskite solar cells with enhanced environmental stability based on amphiphile‐modified CH3NH3PbI310.1002/adma.201505255 ↗
6. Akin · 2020
7. Role of microstructure in oxygen induced photodegradation of methylammonium lead triiodide perovskite films10.1002/aenm.201700977 ↗
8. Solution processed PCBM-CH3NH3PbI3 heterojunction photodetectors with enhanced performance and stability10.1016/j.orgel.2018.02.043 ↗
9. High Speed and stable solution‐processed triple cation perovskite photodetectors10.1002/adom.201701341 ↗
10. Optimization of anti-solvent engineering toward high performance perovskite solar cells10.1557/jmr.2019.122 ↗
11. Flash infrared annealing as a cost-effective and low environmental impact processing method for planar perovskite solar cells10.1016/j.mattod.2019.04.021 ↗
12. Green synthesis of eco-friendly graphene quantum dots for highly efficient perovskite solar cells10.1021/acsaem.0c01896 ↗
13. 21.4% efficiency of perovskite solar cells using BMImI additive in the lead iodide precursor based on carbon nanotubes/TiO2 electron transfer layer10.1016/j.ceramint.2020.07.260 ↗
14. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
15. S. Maryam, A.F. Muyasaroh, A.K. Arof, A. Taufiq, S. Sunaryono, N. Mufti, The effect of polymer gel electrolytes between PAN and PMMA on perovskite solar cells performance synthesized in ambient condition, AIP Conference Proceedings, AIP Publishing LLC2020, pp. 040004.10.1063/5.0015834 ↗
16. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗
17. Ultrasmooth perovskite film via mixed anti-solvent strategy with improved efficiency10.1021/acsami.6b14270 ↗
18. PCBM-blended chlorobenzene hybrid anti-solvent engineering for efficient planar perovskite solar cells10.1039/C7TC02193C ↗
19. Understanding the effect of chlorobenzene and isopropanol anti-solvent treatments on the recombination and interfacial charge accumulation in efficient planar perovskite solar cells10.1039/C8TA03782E ↗
20. Tin (iv) dopant removal through anti-solvent engineering enabling tin based perovskite solar cells with high charge carrier mobilities10.1039/C9TC02003A ↗
21. Optimizing quality of lead-free perovskite thin film with anti-solvent engineering and co-doping SnBr2/SnF2; its solar cell performance10.1016/j.optmat.2020.110524 ↗
22. Interface engineering for highly efficient and stable planar p‐i‐n perovskite solar cells10.1002/aenm.201701883 ↗
23. Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
24. Potassium incorporation for enhanced performance and stability of fully inorganic cesium lead halide perovskite solar cells10.1021/acs.nanolett.7b00050 ↗
25. Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite10.1038/s41598-017-12436-x ↗
26. Boosting the performance of perovskite solar cells through a novel active passivation method10.1039/C8TA05593A ↗
27. Phase segregation in potassium-doped lead halide perovskites from 39K solid-state NMR at 21.1 T10.1021/jacs.8b03191 ↗
28. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation10.1038/nature25989 ↗
29. Universal approach toward hysteresis-free perovskite solar cell via defect engineering10.1021/jacs.7b10430 ↗
30. Efficient perovskite solar cell modules with high stability enabled by iodide diffusion barriers10.1016/j.joule.2019.07.030 ↗
31. Modification of electron-transport layers with mixed RGO/C60 additive to boost the performance and stability of perovskite solar cells: a comparative study10.1016/j.optmat.2021.111313 ↗
32. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air10.1038/s41560-018-0192-2 ↗
33. Enhancement of the photovoltaic performance and the stability of perovskite solar cells via the modification of electron transport layers with reduced graphene oxide/polyaniline composite10.1016/j.solener.2020.11.017 ↗
34. A facile approach to improve the performance and stability of perovskite solar cells via FA/MA precursor temperature controlling in sequential deposition fabrication10.1016/j.optmat.2020.110794 ↗
35. Vapor phase conversion of PbI 2 to CH 3 NH 3 PbI 3: spectroscopic evidence for formation of an intermediate phase10.1039/C5TA08745G ↗
36. Fabrication of stable and efficient 2D/3D perovskite solar cells through post-treatment with TBABF 410.1039/D0TC05010E ↗
37. Novel mixed solution of ethanol/MACl for improving the crystallinity of air-processed triple cation perovskite solar cells10.1016/j.solener.2020.07.039 ↗
38. Solid-phase hetero epitaxial growth of α-phase formamidinium perovskite
39. Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells10.1126/science.abc4417 ↗
40. Improved mixed-dimensional 3D/2D perovskite layer with formamidinium bromide salt for highly efficient and stable perovskite solar cells
41. A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells10.1039/C7EE02634J ↗
42. Improvement of the interfacial contact between zinc oxide and a mixed cation perovskite using carbon nanotubes for ambient-air-processed perovskite solar cells10.1039/D0NJ04656F ↗
43. Surface treatment of ZnO films with carbon nanotubes for efficient and stable perovskite solar cells10.1039/D0SE01493A ↗
44. How contact layers control shunting losses from pinholes in thin-film solar cells10.1021/acs.jpcc.8b09400 ↗
45. Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells10.1038/s41560-019-0538-4 ↗