journal article·2019-04

Solution processed Mo doped SnO2 as an effective ETL in the fabrication of low temperature planer perovskite solar cell under ambient conditions

Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Thad Druffel, Mahendra K. Sunkara, Kaushik Pal

Publisher page

Abstract

Abstract Metal oxide electron transport layers play a crucial role on the extraction and transportation of charge carriers in organic-inorganic hybrid perovskite solar cells (PSCs). However, generally, fabrication of conductive metal oxide thin films requires high temperature annealing which is not compatible with roll to roll fabrication. It has been observed that a low temperature fabricated pristine metal oxide film exhibited low electrical conductivity, which has still prohibited to achieve high performance of device. Therefore, a low amount of metal doping within the pristine metal oxide films followed by low temperature thermal annealing is an effective approach to improve the electrical properties of the metal oxide thin films, and, thus, leading the higher performance of PSCs. Herein, we have developed a low temperature (180 °C) solution processed Molybdenum (Mo) doped SnO2 (SnO2:Mo) as an efficient electron transport layer (ETL) for the fabrication of planer PSCs. The electrical conductivity of pristine film was significantly enhanced after the incorporation of a small amount of Mo dopant within the neat SnO2 film, which could facilitate fast transportation of photo-generated charge carriers. Moreover, due to n-type Mo doping, Fermi level of resulting film was slightly shifted upwards, which could diminish charge recombination and, hence, improved the photovoltaic performance. The power conversion efficiency (PCE) for pristine SnO2 and SnO2:Mo based PSCs was found to be 8.47% and 10.52%, respectively, when ETL and perovskite absorber films were processed in ambient conditions with the relative humidity range of 65%–75%. Compared to pristine SnO2, SnO2:Mo based PSC exhibited higher performance, which was attributed to the enhanced electrical properties of the resulting doped ETL thin film. Our results indicated that low temperature (180 °C) solution processed SnO2:Mo is a promising ETL for cost effective roll to roll fabrication of PSC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Organometal halide perovskites as visible- light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. NREL, PV Research Cell Record Efficiency Chart, https://www.nrel.gov/pv/assets/pdfs/pv-efficiency-chart.20181221.pdf, (accessed:December 2018).
3. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
4. Identifying defect-tolerant semiconductors with high minority-carrier lifetimes: beyond hybrid lead halide perovskites10.1557/mrc.2015.26 ↗
5. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
6. Photoelectrochemical cells.pdf
7. Improving the extraction of photogenerated electrons with SnO2 nanocolloids for efficient planar perovskite solar cells10.1002/adfm.201501264 ↗
8. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
9. Low-temperature, solution processed metal sulfide as an electron transport layer for efficient planar perovskite solar cells10.1039/C5TA01200G ↗
10. Highly crystalline Zn2SnO4 nanoparticles as efficient electron-transporting layers toward stable inverted and flexible conventional perovskite solar cells10.1039/C6TA05745D ↗
11. Perovskite solar cells based on low-temperature processed indium oxide electron selective layers10.1021/acsami.5b12849 ↗
12. Low-temperature and solution-processed amorphous WOX as electron-selective layer for perovskite solar cells10.1021/acs.jpclett.5b00010 ↗
13. Low temperature processed ternary oxide as an electron transport layer for efficient and stable perovskite solar cells10.1016/j.electacta.2017.12.182 ↗
14. CdS as electron transport layer for low-hysteresis perovskite solar cells10.1002/solr.201800056 ↗
15. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
16. Improved interface of ZnO/CH3NH3PbI3 by a dynamic spin-coating process for efficient perovskite solar cells10.1039/C7RA01869J ↗
17. A PCBM electron transport layer containing small amounts of dual polymer additives that enables enhanced perovskite solar cell performance10.1002/advs.201500353 ↗
18. Mesoporous SnO2 nanoparticle films as electron-transporting material in perovskite solar cells10.1039/C5RA01540E ↗
19. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
20. SnO2: a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
21. Lowerature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
22. Effects of annealing temperature of tin oxide electron selective layers on the performance of perovskite solar cells10.1039/C5TA06574G ↗
23. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
24. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide10.1039/C6EE02390H ↗
25. UV-sintered low-temperature solution-processed SnO2 as robust electron transport layer for efficient planar heterojunction perovskite solar cells10.1021/acsami.7b04392 ↗
26. Low-temperature solution-processed Li-doped SnO2 as an effective electron transporting layer for high-performance flexible and wearable perovskite solar cells10.1016/j.nanoen.2016.04.060 ↗
27. Low temperature solution-processed Sb:SnO2 nanocrystals for efficient planar perovskite solar cells10.1002/cssc.201600944 ↗
28. Solution-processed Nb:SnO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsami.6b13362 ↗
29. Rapid thermal annealing of CH3NH3PbI3perovskite thin films by intense pulsed light with aid of diiodomethane additive10.1039/C8TA01237G ↗
30. Performance enhancement of high temperature SnO2-based planar perovskite solar cells: electrical characterization and understanding of the mechanism10.1039/C6TA01839D ↗
31. Electrodeposition of SnO2 on FTO and its application in planar heterojunction perovskite solar cells as an electron transport layer10.1186/s11671-017-2247-x ↗
32. Enhanced electrical properties of antimony doped tin oxide thin films deposited: via aerosol assisted chemical vapour deposition10.1039/C8TC01929K ↗
33. Characterization of transparent and conductive electrodes of Nb-doped SnO2 thin film by pulsed laser deposition10.1016/j.cap.2010.11.070 ↗
34. Effect of Nb doping on structural, electrical and optical properties of spray deposited SnO2 thin films10.1016/j.spmi.2013.01.004 ↗
35. Multi-step slow annealing perovskite films for high performance planar perovskite solar cells10.1016/j.solmat.2015.06.018 ↗
36. Improving the performance of perovskite solar cells by adding 1,8-diiodooctane in the CH3NH3PbI3 perovskite layer10.1016/j.solener.2018.10.037 ↗
37. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗