High performance and stable all-inorganic perovskite light emitting diodes by reducing luminescence quenching at PEDOT:PSS/Perovskites interface
Source abstract
Abstract
Abstract Compared to organic-inorganic halide perovskites (e.g., MAPbBr3 and FAPbBr3), all-inorganic CsPbBr3 perovskite has shown to be a more promising candidate for application in light-emitting diodes (LEDs) due to higher photoluminescence quantum efficiency and thermal stability. Yet, the external quantum efficiency (EQE) of polycrystalline (3D) CsPbBr3 based PeLEDs needs further improvement. The low efficiency was attributed to severe luminescence quenching at PEDOT:PSS (Poly-(3,4-ethylenedioxythiophene):poly(styrenesulfonate))/CsPbBr3 interface arising from (i) interfacial energy barrier between PEDOT:PSS and CsPbBr3 layer, (ii) poor crystallization and large pinholes in perovskite film, and (iii) indium tin oxide (ITO) anode etching due to PEDOT:PSS acidity. Therefore, it is necessary to address all these problems simultaneously to reduce the luminescence quenching and to improve device efficiency. Here, we introduce a feasible approach to modify the PEDOT:PSS layer in order to reduce the luminescence quenching at PEDOT:PSS/CsPbBr3 interface. In this modification, PEDOT:PSS is mixed with a MoO3 ammonia solution at desired volume ratios. Our studies demonstrate that upon this treatment, not only hole injection and crystallization of perovskite film are improved but also ITO is protected from etching by the acidic nature of PEDOT:PSS. This modification result in a high performance all inorganic CsPbBr3 LED with a maximum luminance of ∼34420 cd/m2 and a current efficiency of ∼7.30 cd/A. In addition, our state-of-the-art perovskite LEDs (PeLEDs) exhibit no degradation after 2 h of continuous operation, representing a stable PeLEDs based on one-step solution processed polycrystalline CsPbBr3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
2. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
3. Single-layer light-emitting diodes using organometal halide perovskite/poly(ethylene oxide) composite thin films10.1002/adma.201502490 ↗
4. Efficient perovskite light-emitting diodes featuring nanometer-sized crystallites10.1038/nphoton.2016.269 ↗
5. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells10.1038/nphoton.2016.185 ↗
6. Perovskite energy funnels for efficient light-emitting diodes10.1038/nnano.2016.110 ↗
7. Solution-processed perovskite light emitting diodes with efficiency exceeding 15% through additive controlled nanostructure tailoring10.1038/s41467-018-06425-5 ↗
8. Charge-transfer versus energy-transfer in quasi-2D perovskite light-emitting diodes10.1016/j.nanoen.2018.06.008 ↗
9. Highly efficient perovskite light-emitting diodes incorporating full film coverage and bipolar charge injection10.1021/acs.jpclett.7b00368 ↗
10. Electrode quenching control for highly efficient CsPbBr3 perovskite light-emitting diodes via surface plasmon resonance and enhanced hole injection by Au nanoparticles10.1088/1361-6528/aaaf13 ↗
11. 50-Fold EQE improvement up to 6.27% of solution-processed all-inorganic perovskite CsPbBr3 QLEDs via surface ligand density control10.1002/adma.201603885 ↗
12. Improved performance and stability of all-inorganic perovskite light-emitting diodes by antisolvent vapor treatment10.1002/adfm.201700338 ↗
13. High-efficiency solution-processed inorganic metal halide perovskite light-emitting diodes10.1002/adma.201700579 ↗
14. Enhanced optical and electrical properties of polymer-assisted all-inorganic perovskites for light-emitting diodes10.1002/adma.201602513 ↗
15. 30-Fold efficiency enhancement achieved in the perovskite light-emitting diodes10.1039/C7RA09484A ↗
16. Purification of perovskite quantum dots using low-dielectric-constant washing solvent “diglyme” for highly efficient light-emitting devices10.1021/acsami.8b05954 ↗
17. Conjugated polyelectrolytes as efficient hole transport layers in perovskite light-emitting diodes10.1021/acsnano.8b01715 ↗
18. Nearly 100% efficiency enhancement of CH3NH3PbBr3 perovskite light-emitting diodes by utilizing plasmonic Au nanoparticles10.1021/acs.jpclett.7b01562 ↗
19. Multicolored organic/inorganic hybrid perovskite light-emitting diodes10.1002/adma.201403751 ↗
20. Low turn-on voltage perovskite light-emitting diodes with methanol treated PEDOT:PSS as hole transport layer10.1063/1.5010245 ↗
21. Modified conducting polymer hole injection layer for high-efficiency perovskite light-emitting devices: enhanced hole injection and reduced luminescence quenching10.1021/acs.jpclett.7b01992 ↗
22. Interfacial engineering with ultrathin poly (9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) layer for high efficient perovskite light-emitting diodes10.1088/1361-6528/aa9fa3 ↗
23. Boosting perovskite light-emitting diode performance via tailoring interfacial contact10.1021/acsami.8b07438 ↗
24. Improved performance of perovskite light-emitting diodes using a PEDOT:PSS and MoO3 composite layer10.1039/C6TC02099B ↗
25. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
26. How important is the organic part of lead halide perovskite photovoltaic cells? efficient CsPbBr3 cells10.1021/acs.jpclett.5b00968 ↗
27. CsPbX3 quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes
28. Quasi-2D inorganic CsPbBr3 perovskite for efficient and stable light-emitting diodes10.1002/adfm.201801193 ↗
29. Dependence of indium-tin-oxide work function on surface cleaning method as studied by ultraviolet and X-ray photoemission spectroscopies10.1063/1.371859 ↗
30. Modulation of PEDOT:PSS pH for efficient inverted perovskite solar cells with reduced potential loss and enhanced stability10.1021/acsami.6b11757 ↗
31. A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT:PSS Films10.1016/j.orgel.2013.12.023 ↗
32. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
33. A facile one-step solution deposition via non-solvent/solvent mixture for efficient organometal halide perovskite light-emitting diodes10.1039/C6NR01092J ↗
34. pH-neutral PEDOT:PSS as hole injection layer in polymer light emitting diodes10.1016/j.orgel.2010.12.015 ↗
35. Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT:PSS as the hole transport layer10.1021/am500336s ↗
36. The effect of pH on the electrochemical over-oxidation in PEDOT:PSS films10.1016/j.ssi.2006.10.008 ↗