journal article·2015-02

Effect of PEI cathode interlayer on work function and interface resistance of ITO electrode in the inverted polymer solar cells

Li Yan, Yingxue Song, Yi Zhou, Bo Song, Yongfang Li

Publisher page

Abstract

Abstract In this paper, we investigated the effect of PEI cathode interlayer on the work function and the interface resistance of ITO electrode in the inverted polymer solar cells (PSCs) based on PBDTTT-C-T:PC 70 BM. It is found that a very thin layer of PEI (⩽5.5 nm), either linear PEI ( l -PEI) or branched PEI ( b -PEI) with different molecular weights, is enough to lower the work function of the ITO electrode and to enhance the photovoltaic performance of the devices. The champion power conversion efficiency (PCE) of the devices with the PEI cathode interlayer is 7.84%, more than doubled of that without the interlayer. However, a thicker PEI interlayer (⩾10 nm) results in abrupt decrease of the PCEs due to the increase of the resistance. Interestingly, for the thicker interlayers, the l -PEI shows high photovoltaic performance than that of b -PEI, which can also be explained by their difference in the resistances. This work supplies an insight into the function of PEI cathode interlayer on improving the work function and resistance of ITO electrode in the inverted PSCs, and provides some instructions on the future design of interlayer materials in PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Charge separation and photovoltaic conversion in polymer composites with internal donor-acceptor heterojunctions10.1063/1.359792 ↗
2. Toward high performance inverted polymer solar cells10.1016/j.polymer.2012.09.023 ↗
3. Fullerene-bisadduct acceptors for polymer solar cells10.1002/asia.201300600 ↗
4. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
5. Organic thin-film solar cells using electron-donating perylene tetracarboxylic acid derivatives10.1021/jp9045726 ↗
6. Comparison of small amounts of polycrystalline donor materials in C-70-based bulk heterojunction photovoltaics and optimization of dinaphthothienothiophene based photovoltaic10.1016/j.orgel.2014.01.012 ↗
7. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
8. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
9. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
10. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
11. High-performance inverted polymer solar cells with solution-processed titanium chelate as electron-collecting layer on ITO electrode10.1002/adma.201104863 ↗
12. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
13. Amine group functionalized fullerene derivatives as cathode buffer layers for high performance polymer solar cells10.1039/c3ta12478a ↗
14. Conductive water/alcohol-soluble neutral fullerene derivative as an interfacial layer for inverted polymer solar cells with high efficiency10.1021/am503510z ↗
15. Ultrathin interlayers of a conjugated polyelectrolyte for low work-function cathodes in efficient inverted organic solar cells10.1016/j.orgel.2013.01.018 ↗
16. Electrochemical impedance spectroscopy study of TiO2 based solar cells10.1063/1.4870994 ↗
17. Self-assembled and cross-linked fullerene interlayer on titanium oxide for highly efficient inverted polymer solar cells10.1021/cm1032404 ↗
18. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
19. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
20. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
21. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
22. High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer10.1038/srep04691 ↗
23. Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer10.1016/j.orgel.2014.02.009 ↗
24. Self-assembly of interfacial and photoactive layers via one-step solution processing for efficient inverted organic solar cells10.1039/c3nr04381a ↗
25. All-plastic solar cells with a high photovoltaic dynamic range10.1039/c3ta15073a ↗
26. Seamless polymer solar cell module architecture built upon self-aligned alternating interfacial layers10.1039/c3ee24454g ↗
27. Electrostatically self-assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
28. High performance polymeric charge recombination layer for organic tandem solar cells10.1039/c2ee23294d ↗
29. N-acyldithieno [3,2-b:2′,3′-d]pyrrole-based low-band-gap conjugated polymer solar cells with amine-modified [6,6]-phenyl-c61-butyric acid ester cathode interlayers10.1021/am4032289 ↗
30. Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells10.1021/nn4059067 ↗
31. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
32. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71BM10.1002/adma.201400411 ↗
33. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
34. Enhanced electron injection into inverted polymer light-emitting diodes by combined solution-processed zinc oxide/polyethylenimine interlayers10.1002/adma.201304666 ↗
35. PEDOT:PSS-free organic photovoltaic cells using tungsten oxides as buffer layer on anodes10.1007/s13391-013-0003-7 ↗
36. Pyridine-based electron transporting materials for highly efficient organic solar cells10.1039/C2TA00253A ↗
37. Impedance spectrometry of optimized standard and inverted P3HT-PCBM organic solar cells10.1016/j.solmat.2012.01.013 ↗
38. In situ characterization of lifetime and morphology in operating bulk heterojunction organic photovoltaic devices by impedance spectroscopy10.1002/aenm.201100357 ↗
39. Series resistance in organic bulk-heterojunction solar devices: modulating carrier transport with fullerene electron traps10.1016/j.orgel.2012.06.043 ↗
40. Study of buffer layer thickness on bulk heterojunction solar cell10.1166/jnn.2010.2960 ↗
41. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
42. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
43. The local work function: concept and implications10.1016/S0169-4332(96)00692-7 ↗
44. UV/ozone treated Au for air-stable, low hole injection barrier electrodes in organic electronics10.1063/1.2336345 ↗
45. The impact of local work function variations on fermi level pinning of organic semiconductors10.1021/jp401919z ↗
46. Lowering work function of ITO by covalent surface grafting of aziridine: application in inverted polymer solar cells