Charge carrier mobility, bimolecular recombination and trapping in polycarbazole copolymer:fullerene (PCDTBT:PCBM) bulk heterojunction solar cells
Source abstract
Abstract
Abstract Organic photovoltaic devices based on the donor:acceptor blend of poly[ N -9″-heptadecanyl-2,7-carbazole- alt -5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C 61 butyric acid methyl ester (PCBM) have received considerable attention in recent years due to their high power conversion efficiencies and the ability to achieve close to 100% internal quantum efficiency. However, the highest efficiencies were all attained using active layers of less than 100 nm, which is not ideal for either maximised potential performance or commercial viability. Furthermore, more recent reports have documented significant charge carrier trapping in these devices. In this paper two charge extraction techniques (photo-CELIV and time-of-flight) have been used to investigate the mobility and recombination behaviour in a series of PCDTBT:PCBM devices. The results not only confirm significant charge carrier trapping in this system, but also reveal close to Langevin-type bimolecular recombination. The Langevin recombination causes a short charge carrier lifetime that results in a short drift length. The combination of these two characteristics (trapping and fast bimolecular recombination) has a detrimental effect on the charge extraction efficiency when active layers greater than ∼100 nm are used. This accounts for the pronounced decrease in fill factor with increasing active layer thickness that is typically observed in PCDTBT:PCBM devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance10.1063/1.3601474 ↗
2. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
3. Highly efficient organic solar cells based on a poly(2,7-carbazole) derivative10.1039/b901302d ↗
4. Highly efficient polycarbazole-based organic photovoltaic devices10.1063/1.3182797 ↗
5. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
6. Titanium suboxide as an optical spacer in polymer solar cells10.1063/1.3159622 ↗
7. Plasmon-enhanced solar energy conversion in organic bulk heterojunction photovoltaics10.1063/1.2938089 ↗
8. Enhanced power conversion efficiency in PCDTBT/PC70BM bulk heterojunction photovoltaic devices with embedded silver nanoparticle clusters10.1002/aenm.201100347 ↗
9. Significantly reduced bimolecular recombination in a novel silole-based polymer: fullerene blend10.1002/aenm.201100390 ↗
10. Bulk heterojunction solar cells with thick active layers and high fill factors enabled by a bithiophene-co-thiazolothiazole push–pull copolymer10.1063/1.3544940 ↗
11. Recombination in annealed and nonannealed polythiophene/fullerene solar cells: transient photovoltage studies versus numerical modeling10.1021/jz1001506 ↗
12. Bimolecular recombination coefficient as a sensitive testing parameter for low-mobility solar-cell materials10.1103/PhysRevLett.94.176806 ↗
13. A review of charge transport and recombination in polymer/fullerene organic solar cells10.1002/pip.791 ↗
14. Ultrafast exciton dissociation followed by non geminate charge recombination in PCDTBT:PCBM photovoltaic blends10.1021/ja201837e ↗
15. Transient photocurrent measurements of PCDTBT:PC70BM and PCPDTBT:PC70BM solar cells: evidence for charge trapping in efficient polymer/fullerene blends10.1063/1.3573394 ↗
16. Morphology-dependent trap formation in high performance polymer bulk heterojunction solar cells10.1002/aenm.201100204 ↗
17. Trimolecular recombination in polythiophene: fullerene bulk heterojunction solar cells10.1063/1.2996588 ↗
18. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
19. Thickness dependence of the efficiency of polymer:fullerene bulk heterojunction solar cells10.1063/1.2211189 ↗
20. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
21. Recombination-limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
22. Time-dependent mobility and recombination of the photoinduced charge carriers in conjugated polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.035217 ↗
23. Charge mobility determination by current extraction under linear increasing voltages: case of nonequilibrium charges and field-dependent mobilities10.1103/PhysRevB.81.035209 ↗
24. A new approach for probing the mobility and lifetime of photogenerated charge carriers in organic solar cells under real operating conditions10.1002/adma.201200874 ↗
25. A thermally stable semiconducting polymer10.1002/adma.200903420 ↗
26. Unification of the hole transport in polymeric field-effect transistors and light-emitting diodes10.1103/PhysRevLett.91.216601 ↗
27. Meyer–Neldel rule for charge carrier transport in fullerene devices: a comparative study10.1016/j.orgel.2010.10.014 ↗
28. Charge injection and transport studies of poly(2,7-carbazole) copolymer PCDTBT and their relationship to solar cell performance10.1016/j.orgel.2012.01.030 ↗
29. Investigation of transport properties in polymer/fullerene blends using time-of-flight photocurrent measurements10.1063/1.1624636 ↗
30. Hole transport in poly(phenylene vinylene)/methanofullerene bulk-heterojunction solar cells10.1002/adfm.200305156 ↗
31. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
32. Non-Langevin bimolecular recombination in a silole-based polymer:PCBM solar cell measured by time-resolved charge extraction and resistance-dependent time-of-flight techniques10.1039/C1EE02434E ↗