journal article·2011-02

All inkjet-printed, fully self-aligned transistors for low-cost circuit applications

Huai-Yuan Tseng, Vivek Subramanian

Organic Electronics· Volume 12· Issue 2
Publisher page

Abstract

Abstract Layer-to-layer registration is a significant problem in printed electronics since parasitic overlap capacitances resulting from the poor registration of conventional printers substantially degrade device operating speeds. To overcome this, a novel inkjet printing process was utilized to demonstrate an all inkjet-printed and fully self-aligned transistor, as well as fully self-aligned inverters for the first time. Self-alignment of transistor source/drain electrodes to gates was achieved by a printed wetting-based roll-off process, resulting in an improved overlap capacitance as small as 0.14–0.23 pF mm−1. Circuit building blocks including transistor arrays and inverters were demonstrated using a novel self-split source/drain and a self-aligned interconnect printing technique. Due to the substantial reduction in overlap capacitance, demonstrated inverters showed a propagation delay as low as 0.488 ms at a fan-out of 1, despite using materials with mobility of 0.01 cm2 V−1 s−1, thus showing a performance that is suitable for use in a range of low-cost electronics applications, realized using a simple, scalable process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Thin-Film Transistor Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixes10.1073/pnas.0502392102 ↗
2. A large-area wireless power-transmission sheet using printed organic transistors and plastic MEMS switches10.1038/nmat1903 ↗
3. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors10.1038/nmat2459 ↗
4. An ink-jet-deposited passive component process for RFID10.1109/TED.2004.838451 ↗
5. Screen printed resonant tags for electronic article surveillance tags10.1109/TADVP.2008.2006656 ↗
6. Progress toward development of all-printed RFID tags: materials, processes, and devices10.1109/JPROC.2005.850305 ↗
7. A high-performance all-inkjetted organic transistor technology
8. Amorphous silicon thin-film transistors and arrays fabricated by jet printing10.1063/1.1436273 ↗
9. All-solution-processed bottom-gate organic thin-film transistor with improved subthreshold behaviour using functionalized pentacene active layer10.1088/0022-3727/42/11/115107 ↗
10. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
11. Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing10.1016/j.solmat.2008.12.003 ↗
12. Polymer-based organic field-effect transistor using offset printed source/drain structures10.1063/1.2056579 ↗
13. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
14. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
15. Lithography-free, self-aligned inkjet printing with sub-hundred-nanometer resolution10.1002/adma.200401285 ↗
16. Self-aligned inkjet printing of highly conducting gold electrodes with submicron resolution10.1063/1.2496249 ↗
17. Downscaling of self-aligned, all-printed polymer thin-film transistors10.1038/nnano.2007.365 ↗
18. Self-aligned fabrication process of electrode for organic thin-film transistors on flexible substrate using photosensitive self-assembled monolayers10.1143/JJAP.46.2700 ↗
19. Fine-feature patterning of self-aligned polymeric thin-film transistors fabricated by digital lithography and electroplating10.1063/1.2360237 ↗
20. All inkjet printed self-aligned transistors and circuits applications
21. Flexible complementary inverter with low-temperature processable polymeric gate dielectric on a plastic substrate10.1016/j.orgel.2009.06.014 ↗
22. Dewetting of conducting polymer inkjet droplets on patterned surfaces10.1038/nmat1073 ↗
23. de Gennes · 2004
24. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
25. The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate10.1017/S0022112002003117 ↗
26. Heterogeneous interfacial properties of ink-jet-printed silver nanoparticulate electrode and organic semiconductor10.1002/adma.200702750 ↗
27. Polymer gate dielectric surface viscoelasticity strongly modulates pentacene transistor performance10.1126/science.1146458 ↗
28. Self-organization of ink-jet-printed triisopropylsilylethynyl pentacene via evaporation-induced flows in a drying droplet10.1002/adfm.200700859 ↗
29. High mobility solution processed 6,13-bis(triisopropyl-silylethynyl) pentacene organic thin film transistors10.1063/1.2768934 ↗
30. Inkjet printed via-hole interconnections and resistors for all-polymer transistor circuits10.1002/1521-4095(200111)13:21<1601::AID-ADMA1601>3.0.CO;2-X ↗
31. Uniformity of fully gravure printed organic field-effect transistors10.1016/j.mseb.2010.02.035 ↗
32. Fully printed integrated circuits from solution processable polymers10.1063/1.1767291 ↗