journal article·2008-06

High sensitivity organic photodiodes with low dark currents and increased lifetimes

Marc Ramuz, Lukas Bürgi, Carsten Winnewisser, Peter Seitz

Organic Electronics· Volume 9· Issue 3
Publisher page

Abstract

Abstract Organic semiconductors hold the promise for large-area, low-cost image sensors and monolithically integrated photonic microsystems. This requires the availability of photodiodes offering at the same time high quantum efficiency, low noise and long lifetimes. Although published structures of organic photodiodes offer high external quantum efficiencies (EQE) of up to 76% [F. Padinger, R.S. Rittberber, N.S. Sariciftci, Effects of postproduction treatment on plastic solar cells, Advanced Functional Materials 13 (2003) 1, P. Schilinsky, C. Waldauf, C.J. Brabec, Recombination loss analysis in polythiophene based bulk heterojunction photodetectors, Applied Physics Letters 81 (20) (2002) 3885], [1,2] they normally suffer from short lifetimes of only a few hundred hours as well as large dark currents. In our work the lifetime of a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) heterojunction photodiode structure was increased to several thousand hours by omitting the widely used poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) anode layer. In addition, a simple model of optical interference and absorption effects was used to find the optimum thickness that combines high quantum efficiency with low dark current. As a result, we report on organic photodiodes with state-of-the-art EQE of 70% at 0 V bias, an on/off current ratio of 10 6 at −1 V and 40 mW/cm 2 illumination, dark current densities below 10 nA/cm 2 at −1 V, and a lifetime of at least 3000 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
2. Recombination loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
3. Flexible light-emitting diodes made from soluble conducting polymers10.1038/357477a0 ↗
4. Realization of a large area flexible fullerene – conjugated polymer photocells: a route to plastic solar cells10.1016/S0379-6779(98)00366-X ↗
5. Merocyanine organic solar cells10.1063/1.324566 ↗
6. A low-cost high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
7. The limits to organic photovoltaic cell efficiency10.1557/mrs2005.5 ↗
8. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
9. Polymer photovoltaic detectors: progress and recent developments10.1016/j.tsf.2003.11.062 ↗
10. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
11. Organic double-heterostructure photovoltaic cells employing thick tris(acetylacetonato)ruthenuim(iii) exciton-blocking layers10.1002/adma.200500816 ↗
12. Optical proximity and touch sensors based on monolithically integrated polymer photodiodes and polymer LEDs10.1016/j.orgel.2005.12.002 ↗
13. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
14. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
15. Influence of composition and heat traitment on the vharge transport properties of poly(3-hexylthiophene) and [6,6]-phenyl c61-butiric acid methyl ester blends10.1063/1.2045554 ↗
16. Characterisation of potentiel donor acceptor pairs for polymer solar cells by ESR, optical and electrochemical investigations10.1117/12.505628 ↗
17. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
18. Modeling of optical absorption in conjugated polymer/fullerene bulk-heterojunctiom plastic solar cells
19. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
20. Efficient, high-bandwidth organic multilayer photodetectors10.1063/1.126800 ↗
21. Stability of the interface between indium–tin–oxide and poly(3,4-ethylenedioxythiophene)/poly(styrene-sulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
22. Sze · 1981