journal article·2010-08

Solution deposited NiO thin-films as hole transport layers in organic photovoltaics

K. Xerxes Steirer, Jordan P. Chesin, N. Edwin Widjonarko, Joseph J. Berry, Alex Miedaner, David S. Ginley, Dana C. Olson

Organic Electronics· Volume 11· Issue 8
Publisher page

Abstract

Abstract Organic solar cells require suitable anode surface modifiers in order to selectively collect positive charge carriers and improve device performance. We employ a nickel metal organic ink precursor to fabricate NiO hole transport layers on indium tin oxide anodes. This solution deposited NiO annealed at 250 °C and plasma treated, achieves similar OPV device results reported with NiO films from PLD as well as PEDOT:PSS. We demonstrate a tunable work function by post-processing the NiO with an O 2 -plasma surface treatment of varied power and time. We find that plasma treatment is necessary for optimal device performance. Optimal devices utilizing a solution deposited NiO hole transport layer show lower series resistance and increased fill factor when compared to solar cells with PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. N. Lewis, D.G. Nocera, Powering the planet: chemical challenges in solar energy utilization, in: Proc. Natl. Acad. Sci. USA, vol. 103, 2006, pp. 15729–15735.10.1073/pnas.0603395103 ↗
2. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
3. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
7. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
8. Organic-based photovoltaics: toward low-cost power generation10.1557/mrs2005.2 ↗
9. Effect of fabrication process on the microstructure and the efficiency of organic light-emitting diode10.1016/j.orgel.2009.01.013 ↗
10. Diamond-like carbon as a buffer layer in polymeric electroluminescent device10.1016/j.tsf.2004.12.040 ↗
11. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
12. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
13. High-efficiency hole extraction/electron-blocking layer to replace poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) in bulk-heterojunction polymer solar cells10.1063/1.2834697 ↗
14. J.J. Berry, N.E. Widjonarko, B.A. Bailey, A.K. Sigdel, D.S. Ginley, D.C. Olson, Surface modification of NiO hole transport layers for organic solar cells, IEEE Journal of Selected Topics in Quantum Electronics, accepted for publication.
15. All-inorganic quantum-dot light-emitting devices formed via low-cost, wet-chemical processing10.1039/B905256A ↗
16. D.S. Ginley, C.J. Curtis, A. Miedaner, M.F.A.M. van Hest, T. Kaydanova, Metal Inks, 2008, US Patent 0003364 A1.
17. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
18. Interface modification of ITO thin films: organic photovoltaic cells10.1016/j.tsf.2003.08.067 ↗
19. Pentacene thin-film transistor with NiOx as a source/drain electrode deposited with sputtering10.1149/1.2977966 ↗