Assessing the effect of flexible substrate on the properties of ZnO/Ag/ZnO multilayer transparent conductive electrodes
Source abstract
Abstract
Multilayer oxide/metal/oxide (OMO) structures emerge as suitable alternative to indium tin oxide (ITO) in transparent conductive electrode (TCE) field mainly due to their high visible light transmittance and low resistivity. Moreover, OMO structures are appropriate for flexible organic optoelectronic devices being less susceptible to cracking than single-layer ITO electrodes. Therefore, the present study is focused on the assessment of the properties of ZnO/Ag/ZnO (ZAZ) structures deposited by consecutive radio frequency magnetron sputtering (ZnO) and thermal vacuum evaporation (Ag) on flexible substrates such as polyethylene terephthalate, polyethersulfone and flexible glass. Additionally, the ZAZ deposition was carried out on patterned polyethersulfone in order to evaluate the nanopatterning effect on the properties of the multilayer structures. For comparison, ZAZ structures were also deposited on rigid glass substrate, this being commonly used in optoelectronic devices. The optical and electrical measurements reveal that the roughness of the deposition substrate has a significant impact on the transmittance and sheet resistance of the ZAZ multilayers. Thus, the best performance in terms of transmittance at 550 nm wavelength (82.7%), sheet resistance (9.5 Ω/□) and figure of merit (15.75x10 −3 Ω -1 ), correlated with the lowest roughness (2.3 nm), is achieved for the structure fabricated on flexible glass. The values of the TCE key parameters endorse the developed ZAZ structures for optoelectronic applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Self-powered ultraflexible photonic skin for continuous bio-signal detection via air-operation-stable polymer light-emitting diodes10.1038/s41467-021-22558-6 ↗
2. On-skin ultrathin and stretchable multifunctional sensor for smart healthcare wearables10.1038/s41528-022-00140-4 ↗
3. Self-powered ultra-flexible electronics via nano-grating-patterned organic photovoltaics10.1038/s41586-018-0536-x ↗
4. Revolutionizing wearable technology: advanced fabrication techniques for body-conformable electronics10.1038/s41528-024-00370-8 ↗
5. Strategies for body-conformable electronics10.1016/j.matt.2022.02.006 ↗
6. Organic crystalline materials in flexible electronics10.1039/C8CS00406D ↗
7. New opportunities for organic semiconducting polymers in biomedical applications10.3390/polym14142960 ↗
8. Advancements in stretchable organic optoelectronic devices and flexible transparent conducting electrodes: current progress and future prospects10.1016/j.heliyon.2024.e33002 ↗
9. Organic electronics in flexible devices: engineering strategy, synthesis, and application10.54097/27rxb764 ↗
10. Toward ultraflexible organic electronic devices10.1557/s43577-023-00593-6 ↗
11. A. Brief review of transparent conducting oxides (TCO): the influence of different deposition techniques on the efficiency of solar cells10.3390/nano13071226 ↗
12. Avoiding indium10.1038/nphoton.2011.46 ↗
13. Flexible organic optoelectronic devices: design, fabrication, and applications10.1063/5.0220555 ↗
14. Introduction of a novel figure of merit for the assessment of transparent conductive electrodes in photovoltaics: exact and approximate form10.1002/aenm.202100875 ↗
15. Alternative transparent conducting electrode materials for flexible optoelectronic devices10.1016/j.opelre.2018.06.004 ↗
16. Flexible inverted polymer solar cells with an indium-free tri-layer cathode10.1063/1.4861171 ↗
17. A review on oxide/metal/oxide thin films on flexible substrates as electrodes for organic and perovskite solar cells
18. ZnO/Ag/ZnO multilayers as an n-type transparent conducting electrode for transparent organic light-emitting diodes10.1016/j.apsusc.2024.160596 ↗
19. Highly transparent red organic light-emitting diodes with AZO/Ag/AZO multilayer electrode10.3390/mi15010146 ↗
20. On the electric properties of transparent electrodes, Proc. Romanian Acad. Ser. – math
21. Organic heterostructures obtained on ZnO/Ag/ZnO electrode10.1016/j.vacuum.2018.05.039 ↗
22. High reflectivity and thermal conductivity Ag–Cu multi-material structures fabricated via laser powder bed fusion: formation mechanisms, interfacial characteristics, and molten pool behaviour10.3390/mi14020362 ↗
23. Girtan · Sol. Energy Mater. Sol. Cells · 2012 · 100 · 15310.1016/j.solmat.2012.01.007 ↗
24. Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics10.1116/1.3264464 ↗
25. Studies on the physical properties of TiO2: Nb/Ag/TiO2: Nb and NiO/Ag/NiO three-layer structures on glass and plastic substrates as transparent conductive electrodes for solar cells10.3390/nano11061416 ↗
26. Structural and optical properties of ZnO nanostructures electrochemically synthesized on AZO/Ag/AZO-multilayer-film-coated polyethersulfone substrates10.3938/jkps.60.1695 ↗
27. Interfacial engineering of ultrathin metal film transparent electrode for flexible organic photovoltaic cells10.1002/adma.201306212 ↗
28. Progress, challenges, and perspectives on polymer substrates for emerging flexible solar cells: a holistic panoramic review10.1002/pip.3703 ↗
29. Flexible organic light-emitting diodes on a polyestersulfone (PES) substrate using Al-doped ZnO anode grown by dual-plasma-enhanced metalorganic deposition system10.1016/j.orgel.2012.10.030 ↗
30. Flexible ZnSnO3/Ag/ZnSnO3 multilayer electrodes grown by roll-to-roll sputtering on flexible polyethersulfone substrates10.1116/1.3632999 ↗
31. Flexible glass: enabling thin, lightweight, and flexible electronics
32. Flexible glass: myth and photonic technology10.3390/ma18092010 ↗
33. Plasmonic electrodes for bulk-heterojunction organic photovoltaics: a review10.1117/1.JPE.5.057002 ↗
34. Highly reliable and stretchable OLEDs based on facile patterning method: toward stretchable organic optoelectronic devices10.1038/s41528-024-00303-5 ↗
35. Efficiency improvement in organic solar cells with nano-structured ITO electrodes10.1088/2040-8978/17/6/065901 ↗
36. Effect of the ordered 2D-dot nano-patterned anode for polymer solar cells10.1016/j.orgel.2009.11.007 ↗
37. Light management with patterned micro-and nanostructure arrays for photocatalysis, photovoltaics, and optoelectronic and optical devices
38. Patterning of OLED glass substrate for improving light outcoupling efficiency10.1587/transele.2018OMS0010 ↗
39. Nanostructures induced light harvesting enhancement in organic photovoltaics10.1515/nanoph-2017-0060 ↗
40. Effect of ITO electrode patterning on the properties of organic heterostructures based on non-fullerene acceptor prepared by MAPLE10.1016/j.apsusc.2020.145351 ↗
41. Influence of flexible substrate nature covered with ITO on the characteristics of organic heterostructures fabricated by laser deposition techniques10.1007/s00339-024-08149-4 ↗
42. Polymers for flexible displays: from material selection to device applications10.1016/j.progpolymsci.2007.11.004 ↗
43. Thermally stable and flexible substrate for high-performance organic field-effect transistors10.1016/j.matlet.2022.131797 ↗
44. High quality transparent conductive ZnO/Ag/ZnO multilayer films deposited at room temperature10.1016/j.tsf.2006.07.049 ↗
45. Optimized optical/electrical/mechanical properties of ultrathin metal films for flexible transparent conductor applications: review10.1364/OME.473277 ↗
46. The enhancement of thermal endurance in doped low emissive ZnO/Ag/ZnO multilayer thin film10.1016/j.jallcom.2020.154983 ↗
47. Optical and photoelectric properties of Mn-doped ZnS thin film on a flexible indium-tin-oxide/polyethylene terephthalate substrate prepared by pulsed laser deposition10.1364/OME.6.002336 ↗
48. ZnO/metal/ZnO (metal= Ag, Pt, Au) films for energy-saving in windows application10.1038/s41598-022-20043-8 ↗
49. Polysaccharide-assisted crystallization of ZnO micro/nanostructures10.1016/j.matlet.2013.10.081 ↗
50. The optical properties of Ag/ZnO nanocomposite thin films with different thickness10.1016/j.ijleo.2017.08.078 ↗
51. Improvement in the figure of merit of ITO-metal-ITO sandwiched films on poly substrate by high-power impulse magnetron sputtering10.3390/coatings11020144 ↗
52. The optical properties of metal nanoparticles: the influence of size, shape, and dielectric environment10.1021/jp026731y ↗
53. Preparation and characterization of polyethylene terephthalate/Span-85 pervaporation membranes using waste bottles for the removal of nitrobenzene from water10.1007/s10924-023-02784-3 ↗
54. Tuning the morphology of silver nanostructures photochemically coated on glass substrates: an effective approach to large-scale functional surfaces10.1088/1361-6528/28/10/105603 ↗
55. New figure of merit for transparent conductors10.1063/1.323240 ↗
56. Influence of surface roughness on the electrical conductivity of semiconducting thin films10.1016/j.physa.2013.03.007 ↗
57. High-performance radiation stable ZnO/Ag/ZnO multilayer transparent conductive electrode10.1016/j.solmat.2017.05.009 ↗
58. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
59. High transparent and conductive ZnO/Ag/ZnO film structure
60. Characteristics of an oxide/metal/oxide transparent conducting electrode fabricated with an intermediate Cu–Mo metal composite layer for application in efficient CIGS solar cell10.1039/C7RA07406A ↗
61. Manipulating photoelectric properties at ZnO/Ag/ZnO sandwich structure by ag intercalation10.1016/j.vacuum.2024.113462 ↗
62. Enhanced optical, electrical, and mechanical characteristics of ZnO/Ag grids/ZnO flexible transparent electrodes