From noble metal ion implantation to tailored optical and electrical performance of TiN thin films via rapid thermal annealing
Source abstract
Abstract
Titanium nitride (TiN) thin films were implanted with 110 keV silver ions and 150 keV gold ions at a fluence of 5 × 1016 ions/cm2 and subsequently subjected to rapid thermal annealing at 700◦C for 10 s, 30 s, and 60 s. Spectroscopic ellipsometry, four-point probe measurements, and X-ray photoelectron spectroscopy were used to monitor changes in dielectric function, electrical conductivity, and surface chemistry. Silver implantation induced moderate lattice damage and nanoparticle formation, partially reducing metallicity and optical absorption, which were efficiently restored by short-term annealing via defect healing and improved carrier mobility. Gold implantation caused stronger structural disorder, suppressing metallic and optical response, with only limited recovery after annealing. Drude–Lorentz analysis quantitatively correlated plasma frequency and damping constant with resistivity trends, demonstrating a direct link between defect dynamics and macroscopic optical and electrical properties. X-ray photoelectron spectroscopy confirmed these changes occurred independently of surface oxidation, indicating that defect evolution and free-carrier modulation are the primary drivers. These results provide a controllable strategy to tune TiN thin films through ion implantation and thermal treatment, offering guidance for designing plasmonic and optoelectronic coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
2. Optical properties and plasmonic performance of titanium nitride10.3390/ma8063128 ↗
3. Refractory plasmonics10.1126/science.1252722 ↗
4. Mechanical properties and electrical conductivity of TiN–Al2O3 nanocomposites10.1016/S0955-2219(02)00089-4 ↗
5. Titanium nitride as a multifunctional material: a review
6. Titanium nitride (TiN) as a promising alternative to plasmonic metals: a comprehensive review of synthesis and applications10.1039/D3MA00965C ↗
7. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
8. Diffusion barrier property of TiN and TiN/Al/TiN films deposited with FMCVD for Cu interconnection in ULSI10.1016/j.stam.2004.02.001 ↗
9. Multicomponent and multiphase hard coatings for tribological applications10.1016/S0257-8972(00)00783-0 ↗
10. Titanium nitride thin films for sensor applications
11. Low-loss plasmonic metamaterials10.1126/science.1198258 ↗
12. High aspect ratio titanium nitride trench structures as plasmonic biosensor10.1364/OME.7.004171 ↗
13. Label-free surface plasmon resonance biosensing with titanium nitride thin film10.1016/j.bios.2018.02.006 ↗
14. Detection of glioma-derived exosomes with the biotinylated antibody-functionalized titanium nitride plasmonic biosensor
15. Nanostructured titanium nitride for highly sensitive localized surface plasmon resonance biosensing10.1016/j.ceramint.2020.05.163 ↗
16. Xenon implantation effects on the structural and optical properties of reactively sputtered titanium nitride thin films10.1016/j.materresbull.2017.03.031 ↗
17. Optical properties and microstructure of TiNxOy and TiN thin films before and after annealing at different conditions10.3390/coatings9010022 ↗
18. Ion implanted modification of nanomaterials for semiconductor devices and other applications
19. Investigation of high-intensity implantation of titanium ions into silicon under conditions of beam energy impact on the surface10.1134/S1027451024701040 ↗
20. Clustering of gold particles in Au implanted CrN thin films: the effect on the SPR peak position10.1016/j.apsusc.2017.07.233 ↗
21. How do energetic ions damage metallic surfaces?10.1016/j.cossms.2014.12.001 ↗
22. Structural, optical and electrical properties of argon implanted TiN thin films10.1016/j.ijrmhm.2014.09.026 ↗
23. Defect and structural evolution under high-energy ion irradiation informs battery materials design for extreme environments10.1038/s41467-020-18345-4 ↗
24. Nickel-hexagonal phase induced in Ni3Si-monoclinic intermetallic phase by ion beam irradiation10.1080/10420150.2024.2332209 ↗
25. Tunable formation of gold nanoparticles on polymer by keV ion beam irradiation10.1080/10420150.2024.2318708 ↗
26. Hybrid plasmonic Au–TiN vertically aligned nanocomposites: a nanoscale platform towards tunable optical sensing10.1039/C8NA00306H ↗
27. Low optical losses in plasmonic TiN thin films implanted with silver and gold10.1016/j.optmat.2021.111936 ↗
28. Investigating the optical response of titanium-nitride thin films after silver ion implantation and post-thermal annealing10.1016/j.optmat.2022.112955 ↗
29. Structural and optical modifications of TiN thin films through ion irradiation: a comparative study
30. Structure-dependent optical properties of Au/Ag irradiated TiN thin films10.1016/j.optmat.2023.113684 ↗
31. Optimal control of rapid thermal annealing in a semiconductor process10.1016/j.jprocont.2003.07.005 ↗
32. Thermal processing in semiconductor implant annealing: historical and technological evolution10.1557/s43580-025-01202-1 ↗
33. Effect of rapid thermal annealing on bulk micro-defects and plastic deformation in silicon during high temperature processing10.1016/j.mssp.2018.06.003 ↗
34. Progress in vacuum photothermal processing (VPP)10.1016/j.mejo.2005.07.014 ↗
35. From RTA to conventional annealing: impact on optical losses and metallic character of TiN films10.1016/j.optmat.2025.116718 ↗
36. Influence of implantation and annealing temperatures on the irradiation damage in He2+ ion implanted 6H-SiC10.1016/j.nimb.2025.165611 ↗
37. Defect evolution and nitrogen incorporation in ion-implanted β-Ga2O310.1063/5.0239899 ↗
38. Ziegler · 1985
39. Optical, electronic, and transport properties of nanocrystalline titanium nitride thin films10.1063/1.1403677 ↗
40. Quantitative chemical state XPS analysis of first row transition metals, oxides and hydroxides10.1088/1742-6596/100/1/012025 ↗
41. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
42. Study of nitrogen implantation in Ti surface using plasma immersion ion implantation & deposition technique as biocompatible substrate for artificial membranes10.1016/j.msec.2020.111002 ↗
43. Surface characterisation of plasma nitrided titanium: an XPS study10.1016/0169-4332(94)00545-1 ↗
44. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
45. A complete and self-consistent evaluation of XPS spectra of TiN10.1016/j.elspec.2012.10.011 ↗
46. Synthesis of high-performance titanium sub-oxides for electrochemical applications using combination of sol-gel and vacuum-carbothermic processes10.1021/acssuschemeng.7b03189 ↗
47. Corrosion resistance of single TiN layers, Ti/TiN bilayers and Ti/TiN/Ti/TiN multilayers on iron under a salt fog spray (phohesion) test: an evaluation by XPS10.1002/(SICI)1096-9918(199902)27:2<71::AID-SIA469>3.0.CO;2-G ↗
48. NIST X-ray Photoelectron Spectroscopy database
49. Wagner · 2003
50. Ashcroft · 1976
51. Hecht · 2001
52. Azzam · 1977
53. Structure Formation and Regulation of Au Nanoparticles in LiTaO3 by Ion Beam and Thermal Annealing Techniques10.3390/nano12224028 ↗
54. Creation of gold nanoparticles in ZnO by ion Implantation‒DFT and experimental studies10.3390/nano10122392 ↗
55. How Nanoparticles Coalesce: an in Situ Study of Au Nanoparticle Aggregation and Grain Growth10.1021/cm200354d ↗
56. Modifications of reactively sputtered titanium nitride films by argon and vanadium ion implantation: microstructural and opto-electric properties10.1016/j.tsf.2013.01.045 ↗