Investigation of the CdS quantum dot sensitized solar cells based on a series of zinc titanium mixed metal oxides
Source abstract
Abstract
Abstract In this work, a series of zinc titanium mixed metal oxides obtained from the zinc titanium layered double hydroxides as precursor were prepared as the photoanode material of the CdS quantum dot-sensitized solar cells. CdS quantum dots were deposited on photoanodes by the successive ionic adsorption and reaction method. It was investigated that the effects of photoanode based on different Zn–Ti molar ratios on the photovoltaic performance of solar cells. The essential parameters of samples were investigated by UV–vis absorption spectrum, incident photon-to-current conversion efficiency, photoelectric conversion efficiency and electrochemical impendence spectrum. The varying Zn–Ti ratios influence adsorption properties and charge mobility. As a result, the cells based on Zn–Ti MMOs achieved an optimum power conversion efficiency of 2.71% when the Zn–Ti ratio is 7:1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Photographic surveying of minority carrier diffusion length in polycrystalline silicon solar cells by electroluminescence10.1063/1.1978979 ↗
2. Surface plasmon enhanced silicon solar cells10.1063/1.2734885 ↗
3. Optoelectronic properties analysis of silicon light-emitting diode monolithically integrated in standard CMOS IC10.1088/1674-1056/ab3e44 ↗
4. Advantageous light management in Cu(In,Ga)Se2 superstrate solar cells10.1016/j.solmat.2016.02.005 ↗
5. Iron pyrite nanocrystal film serves as a copper-free back contact for polycrystalline CdTe thin film solar cells10.1016/j.solmat.2015.03.032 ↗
6. Recent progress and the status of dye-sensitised solar cell (DSSC) technology with state-of-the-art conversion efficiencies10.1016/j.solmat.2013.08.031 ↗
7. Dye-sensitized solar cells10.1021/cr900356p ↗
8. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
9. Boosting power conversion efficiencies of quantum-dot-sensitized solar cells beyond 8% by recombination control10.1021/jacs.5b01946 ↗
10. Boosting the open circuit voltage and fill factor of QDSSCs using hierarchically assembled ITO@Cu2S nanowire array counter electrodes10.1021/acs.nanolett.5b00096 ↗
11. Charge recombination control for high efficiency quantum dot sensitized solar cells10.1021/acs.jpclett.5b02153 ↗
12. Doubling the power conversion efficiency in CdS/CdSe quantum dot sensitized solar cells with a ZnSe passivation layer10.1016/j.nanoen.2016.05.012 ↗
13. Visible light absorption of surface modified TiO2 powders with bidentate benzene derivatives10.1016/j.micromeso.2015.06.028 ↗
14. Controlled synthesis of symbiotic structured TiO2 microspheres to improve the performance of dye-sensitized solar cells10.1016/j.solener.2019.02.063 ↗
15. The prospective photo anode composed of zinc tin mixed metal oxides for the dye-sensitized solar cells10.1016/j.colsurfa.2018.03.051 ↗
16. Preparation and photovoltaic properties of dye-sensitized solar cells based on zinc titanium mixed metal oxides10.1016/j.colsurfa.2019.02.005 ↗
17. A comparison of ZnS and ZnSe passivation layers on CdS/CdSe co-sensitized quantum dot solar cells10.1039/C6TA01590E ↗
18. Influence of deposition strategies on CdSe quantum dot-sensitized solar cells: a comparison between successive ionic layer adsorption and reaction and chemical bath deposition10.1039/C5TA01461A ↗
19. Significantly enhanced open circuit voltage and fill factor of quantum dot sensitized solar cells by linker seeding chemical bath deposition10.1021/jp3094319 ↗
20. A novel ZnS/SiO2 double passivation layers for the CdS/CdSe quantum dots co-sensitized solar cells based on zinc titanium mixed metal oxides
21. Silicon MOS optoelectronic micro-nano structure based on reverse-biased PN junction
22. Light emission from a poly-silicon device with carrier injection engineering10.1016/j.mseb.2018.07.002 ↗
23. The role of insulating oxides in blocking the charge carrier recombination in dye-sensitized solar cells10.1002/adfm.201302352 ↗