Effect of Mg doping on the infrared emissivity of ZnO powders at high temperature
Source abstract
Abstract
Abstract Infrared emissivity of semiconductor material determines infrared radiation capability of semiconductor material. In recent years, researchers have focused on the infrared emissivity performance of ZnO at room temperature. The infrared emissivity performance of ZnO at high temperatures is rarely studied. In this paper, Zn1-xMgxO powders were prepared by sol-gel method. The infrared emissivity of powders with different x (x = 0, 0.01, 0.03, 0.05, 0.07) were investigated from room temperature to 800 °C. The composition and calcination temperature of precursors were determined by DSC, and the changes in morphology, particle size, microstructure and phase compositions were studied by SEM, EDS and XRD separately. The changes of infrared emissivity of powders with different Mg doping concentrates from room temperature to 800 °C are explained by dielectric mechanism, conduction mechanism and lattice vibration mechanism, and the varies of infrared emissivity with temperature, which showing a U-shaped curve are also explained by the three mechanisms mentioned above. An effective and convenient method for regulating the infrared emissivity of ZnO is provided in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Transition Metal Oxide Nanomaterials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Preparation, characterization and infrared emissivity properties of polymer derived coating formed on 304 steel10.1016/j.surfcoat.2012.03.040 ↗
2. Thermochromic and infrared emissivity characteristics of cobalt doped zinc oxide for smart stealth in visible-infrared region10.1016/j.optmat.2018.10.051 ↗
3. Effect of Ni20Cr alloy on infrared emissivity of inorganic silicate heat-resistant composite coatings10.1016/j.surfcoat.2016.01.008 ↗
4. An elevated temperature infrared emissivity ceramic coating formed on 2024 aluminium alloy by microarc oxidation10.1016/j.ceramint.2012.09.060 ↗
5. Effect of strontium doping on dielectric and infrared emission properties of barium aluminosilicate ceramics10.1016/j.matlet.2016.07.113 ↗
6. The effects of Ca2+ and Y3+ ions co-doping on reducing infrared emissivity of ceria at high temperature10.1016/j.infrared.2018.06.012 ↗
7. Influence of Mg doping on the structural, optical, and electrical properties of Zn0.95Li0.05O Nanoparticles10.1111/ijac.13060 ↗
8. Highly luminescent columnar ZnO films grown directly on n-Si and p-Si substrates by low-temperature electrochemical deposition10.1016/j.optmat.2011.01.024 ↗
9. Coin-like α-Fe2O3@CoFe2O4 core-shell composites with excellent absorption performance10.1021/am508438s ↗
10. Symmetrical polyhedron-bowl Co/CoO with hexagonal plate to forward electromagnetic wave absorption ability10.1039/C8CE01677A ↗
11. A voltage-boosting strategy enabling a low-frequency, flexible electromagnetic absorption device10.1002/adma.201706343 ↗
12. Synthesis and photoluminescence characterization of ZnO nanoparticles10.1016/j.jlumin.2012.08.045 ↗
13. Preparation and infrared emissivity of self-assembled ZnO spherical aggregates10.1016/j.mssp.2014.03.030 ↗
14. Preparation and infrared emissivity of ZnO:Al(AZO)thin films10.1016/j.apsusc.2009.01.068 ↗
15. Synthesis and infrared emissivity of Mn-doped ZnO:Co powders10.1016/j.infrared.2013.07.004 ↗
16. A wien displacement law for impact radiation10.1016/S0734-743X(99)00060-3 ↗
17. Effects of non-stoichiometric ratio on optical characteristics of Mg-doped ZnO nanorods10.1016/j.optmat.2019.02.048 ↗
18. Influence of Mg doping on ZnO nanoparticles for enhanced photocatalytic evaluation and antibacterial analysis10.1186/s11671-018-2643-x ↗
19. Structural characteristics and UV-light enhanced gas sensitivity of La-doped ZnO nanoparticles10.1016/j.mseb.2007.05.008 ↗
20. Effects of non-stoichiometric ratio on optical characteristics of Mg-doped ZnO nanorods10.1016/j.optmat.2019.02.048 ↗
21. etal. Structural and photoluminescence properties of Mg substituted ZnO nanoparticles10.1016/j.optmat.2013.12.015 ↗
22. First-principle calculations and experimental investigation on the infrared emissivity property of Mg-doped ZnO10.1016/j.materresbull.2017.08.011 ↗
23. Electrical conduction and photoconduction
24. Conductivity enhancement and semiconductor–metal transition in Ti-doped ZnO films10.1016/j.optmat.2006.08.002 ↗
25. Thermal shock behavior and infrared radiation property of integrative insulations consisting of MoSi2/borosilicate glass coating and fibrous ZrO2 ceramic substrate, Surface and Coating Technology10.1016/j.surfcoat.2015.03.008 ↗
26. Temperature-dependent infrared dielectric functions of MgO crystal:An ellipsometry and first-principle molecular dynamics study10.1063/1.4895134 ↗
27. A flexible microwave shield with tunable frequency-transmission and electromagnetic compatibility10.1002/adfm.201900163 ↗
28. Achieving excellent bandwidth absorption by a mirror growth process of magnetic porous polyhedron structures10.1007/s12274-016-1074-1 ↗
29. On the cooperativity of the betarelaxation: a discussion based on dielectric relaxation and thermally stimulated depolarization currents data10.1039/b005867j ↗
30. Achieving hierarchical hollow carbon@Fe@Fe3O4 nanospheres with superior microwave absorption properties and lightweight features10.1039/C5TC02512E ↗
31. Conductivity, charge carrier mobility and ageing of ZnPc/C60 solar cells10.1016/j.optmat.2010.04.008 ↗
32. Efficient ITO-free organic light-emitting devices with dual-functional PSS-rich PEDOT:PSS electrode by enhancing carrier balance10.1039/C9TC00648F ↗
33. Curtailed recombination rate and fast carrier transport in ZnPc/GaAs/ZnPc stacked hybrid structure10.1016/j.optmat.2018.08.032 ↗
34. Comparison and optimization of reactive dyes and coating performance on fraxinus mandshurica veneer10.3390/polym10121302 ↗