Passivation of InP solar cells using large area hexagonal-BN layers
Source abstract
Abstract
Abstract Surface passivation is crucial for many high-performance solid-state devices, especially solar cells. It has been proposed that 2D hexagonal boron nitride (hBN) films can provide near-ideal passivation due to their wide bandgap, lack of dangling bonds, high dielectric constant, and easy transferability to a range of substrates without disturbing their bulk properties. However, so far, the passivation of hBN has been studied for small areas, mainly because of its small sizes. Here, we report the passivation characteristics of wafer-scale, few monolayers thick, hBN grown by metalorganic chemical vapor deposition. Using a recently reported ITO/i-InP/p+-InP solar cell structure, we show a significant improvement in solar cell performance utilizing a few monolayers of hBN as the passivation layer. Interface defect density (at the hBN/i-InP) calculated using C–V measurement was 2 × 1012 eV−1cm−2 and was found comparable to several previously reported passivation layers. Thus, hBN may, in the future, be a possible candidate to achieve high-quality passivation. hBN-based passivation layers can mainly be useful in cases where the growth of lattice-matched passivation layers is complicated, as in the case of thin-film vapor–liquid–solid and close-spaced vapor transport-based III–V semiconductor growth techniques.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanowire Synthesis and Applications · Semiconductor Quantum Structures and Devices · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Raj, V., Tan, H. H. & Jagadish, C. Non-epitaxial carrier selective contacts for III-V solar cells: a review. Appl. Mater. Today 18, 100503 (2019).10.1016/j.apmt.2019.100503 ↗
2. Raj, K. Jain. InP solar cell with window layer. USA patent, US5322573 (1994).
3. Connolly, J. P. & Mencaraglia, D. in Materials Challenges: Inorganic Photovoltaic Solar Energy, 209–246 (The Royal Society of Chemistry, Cambridge, 2015).10.1039/9781849733465-00209 ↗
4. Mar, J. M. State-of-the-art of III-V solar cell fabrication technologies, device designs and applications. in Advanced Photovoltaic Cell Design, Ch. 1, 1−8 (EN548, 2004).
5. Raj, V. et al. Indium phosphide based solar cell using ultra-thin ZnO as an electron selective layer. J. Phys. D Appl. Phys. 51, 395301 (2018).10.1088/1361-6463/aad7e3 ↗
6. Robertson, J., Guo, Y. & Lin, L. Defect state passivation at III-V oxide interfaces for complementary metal–oxide–semiconductor devices. J. Appl. Phys. 117, 112806 (2015).10.1063/1.4913832 ↗
7. Lin, L. & Robertson, J. Defect states at III-V semiconductor oxide interfaces. Appl. Phys. Lett. 98, 082903 (2011).10.1063/1.3556619 ↗
8. Zhou, L. et al. Brief review of surface passivation on III-V semiconductor. Crystals 8, 226 (2018).10.3390/cryst8050226 ↗
9. Raj, V., Fu, L., Tan, H. H. & Jagadish, C. Design principles for fabrication of InP-based radial junction nanowire solar cells using an electron selective contact. IEEE J. Photovolt. 9, 980–991 (2019).10.1109/JPHOTOV.2019.2911157 ↗
10. Raj, V., Vora, K., Fu, L., Tan, H. H. & Jagadish, C. High-efficiency solar cells from extremely low minority carrier lifetime substrates using radial junction nanowire architecture. ACS Nano 13, 12015–12023 (2019).10.1021/acsnano.9b06226 ↗
11. Hui, F. et al. On the use of two dimensional hexagonal boron nitride as dielectric. Microelectron. Eng. 163, 119–133 (2016).10.1016/j.mee.2016.06.015 ↗
12. Cinzia C. F. W. 2D Materials for Nanoelectronics (CRC Press, Boca Raton, 2016).
13. Shanmugam, M., Jacobs-Gedrim, R., Durcan, C. & Yu, B. 2D layered insulator hexagonal boron nitride enabled surface passivation in dye sensitized solar cells. Nanoscale 5, 11275–11282 (2013).10.1039/c3nr03767c ↗
14. Chugh, D. et al. Flow modulation epitaxy of hexagonal boron nitride. 2D Mater. 5, 045018 (2018).10.1088/2053-1583/aad5aa ↗
15. Cho, A.-J. & Kwon, J.-Y. Hexagonal boron nitride for surface passivation of two-dimensional van der Waals heterojunction solar cells. ACS Appl. Mater. Interfaces 11, 39765–39771 (2019).10.1021/acsami.9b11219 ↗
16. Kalita, G., Kobayashi, M., Shaarin, M. D., Mahyavanshi, R. D. & Tanemura, M. Schottky barrier diode characteristics of graphene-GaN heterojunction with hexagonal boron nitride interfacial layer. Phys. Status Solidi A 215, 1800089 (2018).
17. Li, X. et al. Graphene/h-BN/GaAs sandwich diode as solar cell and photodetector. Opt. Express 24, 134–145 (2016).10.1364/OE.24.000134 ↗
18. Li, Q., Zhou, Q., Shi, L., Chen, Q. & Wang, J. Recent advances in oxidation and degradation mechanisms of ultrathin 2D materials under ambient conditions and their passivation strategies. J. Mater. Chem. A 7, 4291–4312 (2019).10.1039/C8TA10306B ↗
19. Shanmugam, M., Jain, N., Jacobs-Gedrim, R., Xu, Y. & Yu, B. Layered insulator hexagonal boron nitride for surface passivation in quantum dot solar cell. Appl. Phys. Lett. 103, 243904 (2013).10.1063/1.4848235 ↗
20. Chugh, D., Jagadish, C. & Tan, H. Large-area hexagonal boron nitride for surface enhanced raman spectroscopy. Adv. Mater. Technol. 4, 1900220 (2019).10.1002/admt.201900220 ↗
21. Khanna, A. et al. A fill factor loss analysis method for silicon wafer solar cells. IEEE J. Photovolt. 3, 1170–1177 (2013).10.1109/JPHOTOV.2013.2270348 ↗
22. Green, M. A. Accuracy of analytical expressions for solar cell fill factors. Sol. Cells 7, 337–340 (1982).10.1016/0379-6787(82)90057-6 ↗
23. Terman, L. M. An investigation of surface states at a silicon/silicon oxide interface employing metal-oxide-silicon diodes. Solid State Electron. 5, 285–299 (1962).10.1016/0038-1101(62)90111-9 ↗
24. Park, J. H. et al. Defect passivation of transition metal dichalcogenides via a charge transfer van der Waals interface. Sci. Adv. 3, e1701661 (2017).10.1126/sciadv.1701661 ↗
25. Wen-Chin, L. & Chenming, H. Modeling gate and substrate currents due to conduction- and valence-band electron and hole tunneling [CMOS technology]. In 2000 Symposium on VLSI Technology. Digest of Technical Papers (Cat. No.00CH37104) 198–199 (IEEE, Honolulu, HI, 2000).
26. Peibst, R. et al. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story? Sol. Energy Mater. Sol. 158, 60–67 (2016).10.1016/j.solmat.2016.05.045 ↗
27. Rienäcker, M. et al. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance. IEEE J. Photovolt. 7, 11–18 (2017).10.1109/JPHOTOV.2016.2614123 ↗
28. Wietler, T. F. et al. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide. Appl. Phys. Lett. 110, 253902 (2017).10.1063/1.4986924 ↗
29. Cao, X. K., Clubine, B., Edgar, J. H., Lin, J. Y. & Jiang, H. X. Two-dimensional excitons in three-dimensional hexagonal boron nitride. Appl. Phys. Lett. 103, 191106 (2013).10.1063/1.4829026 ↗
30. Chu, D., Lee, Y. H. & Kim, E. K. Selective control of electron and hole tunneling in 2D assembly. Sci. Adv. 3, e1602726 (2017).10.1126/sciadv.1602726 ↗