Enhancing the short-circuit current and power conversion efficiency of polymer solar cells with graphene quantum dots derived from double-walled carbon nanotubes
Source abstract
Abstract
Derived from double-walled carbon nanotubes, graphene quantum dots (GQDs) with a uniform size distribution were prepared through solution chemistry. The GQDs in chlorobenzene exhibited bright blue emission upon UV excitation. The introduction of the GQDs into a bulk heterojunction polymer solar cell based on poly(3-hexylthiophene):(6,6)-phenyl-C61 butyric acid methyl ester (P3HT:PCBM) resulted in a significant enhancement of the power conversion efficiency (PCE). The efficiency was further improved by adjusting the PCBM content in the active layer, reaching a maximum PCE of 5.24%. This ternary system based on blended P3HT:PCBM:GQDs represents a new method to enhance the efficiency of polymer solar cells. Fushan Li, Tailiang Guo and co-workers from Fuzhou University, China, have constructed an efficient polymer solar cell by adding graphene quantum dots to a conventional design. Lighter than their silicon-based counterparts, easier to fabricate and more environmentally friendly, polymer solar cells show particular promise but do not yet convert enough of the sunlight they absorb for practical application. The active layer of such solar cells comprises an electron-donating material — often the conjugated polymer poly(3-hexylthiophene) — and an electron-accepting one, such as a fullerene derivative. The use of graphene quantum dots as the electron acceptor has recently been shown to endow a photovoltaic device with good stability and low cost but also a relatively poor performance. Li, Guo and their colleagues have now incorporated graphene quantum dots — prepared from double-walled carbon nanotubes — in addition to, rather than instead of, the fullerene-based electron acceptor of a polymer solar cell, significantly enhancing its energy conversion efficiency. Graphene quantum dots (GQDs) derived from double-walled carbon nanotubes with strong emission were prepared through solution chemistry. The introduction of GQDs in a bulk heterojunction polymer solar cell based on Poly (3-hexylthiophene):(6,6)-phenyl-C61 butyric acid methyl ester (P3HT:PCBM) resulted in the significant enhancement of power conversion efficiency (PCE). The efficiency can be further improved by adjusting the PCBM content in the active layer, with the highest PCE of 5.24%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon and Quantum Dots Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Gunes, S., Neugebauer, H. & Sariciftci, N. S. Conjugated polymer-based organic solar cells. Chem. Rev. 107, 1324–1338 (2007).10.1021/cr050149z ↗
2. Roncali, J. Molecular bulk heterojunctions: an emerging approach to organic solar cells. Acc. Chem. Res. 42, 1719–1730 (2009).10.1021/ar900041b ↗
3. Meissner, D. & Wohrle, D. Organic solar cells. Adv. Mater. 3, 129–138 (1991).10.1002/adma.19910030303 ↗
4. Huynh, W. U., Dittmer, J. J. & Alivisatos, P. A. Hybrid nanorod-polymer solar cells. Science 295, 2425–2427 (2002).10.1126/science.1069156 ↗
5. Padinger, F., Rittberger, R. S. & Sariciftci, N. S. Effects of postproduction treatment on plastic solar cells. Adv. Funct. Mater. 13, 85–88 (2003).10.1002/adfm.200390011 ↗
6. Hwang, I., Moses, D. & Heeger, A. J. Photoinduced carrier generation in P3HT/PCBM bulk heterojunction materials. J. Phys. Chem. C 112, 4350–4354 (2008).10.1021/jp075565x ↗
7. Vanlaeke, P., Swinnen, A., Haeldermans, I., Vanhoyland, G., Aernouts, T., Cheyns, D., Deibel, C., Dhaen, J., Heremans, P., Poortmans, J. & Manca, J. V. P3HT/PCBM bulk heterojunction solar cells: relation between morphology and electro-optical characteristics. Sol. Energy Mater. Sol. Cells 90, 2150–2158 (2006).10.1016/j.solmat.2006.02.010 ↗
8. Hauch, J. A., Schilinsky, P., Choulis, S. A., Childers, R., Biele, M. & Brabec, C. J. Flexible organic P3HT: PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime. Sol. Energy Mater. Sol. Cells 92, 727–731 (2008).10.1016/j.solmat.2008.01.004 ↗
9. Chen, D., Liu, F., Wang, C., Nakahara, A. & Russell, T. P. Bulk heterojunction photovoltaic active layers via bilayer interdiffusion. Nano Lett. 11, 2071–2078 (2011).10.1021/nl200552r ↗
10. Koleilat, G. I., Levina, L., Shukla, H., Myrskog, S. H., Hinds, S., Pattantyus-Abraham, A. G. & Sargent, E. H. Efficient, stable infrared photovoltaics based on solution-cast colloidal quantum dots. ACS Nano 2008, 833–840 (2008).10.1021/nn800093v ↗
11. Vavilov, M. G., Ambegaokar, V. & Aleiner, I. L. Charge pumping and photovoltaic effect in open quantum dots. Phys. Rev. B 63, 195313 (2001).10.1103/PhysRevB.63.195313 ↗
12. Barkhouse, D. A. R., Pattantyus-Abraham, A. G., Levina, L. & Sargent, E. H. Thiols passive recombination centers in colloidal quantum dots leading to enhanced photovoltaic device efficiency. ACS Nano 2, 2356–2362 (2008).10.1021/nn800471c ↗
13. Mcdonald, S. A., Konstantatos, G., Zhang, S., Cyr, P. W., Klem, E. J. D., Levina, L. & Sargent, E. H. Solution-processed PbS quantum dot infrared photodetectors and photovoltaics. Nat. Mater. 4, 138–142 (2005).10.1038/nmat1299 ↗
14. Noone, K. M., Strein, E., Anderson, N. C., Wu, P., Jenekhe, S. A. & Ginger, D. S. Broadband absorbing bulk heterojunction photovoltaics using low-bandgap solution processed quantum dots. Nano Lett. 10, 2635–2639 (2010).10.1021/nl1013663 ↗
15. Gupta, V., Chaudhary, N., Srivastava, R., Sharma, G. D., Bhardwaj, R. & Chand, S. Luminescent graphene quantum dots for organic photovoltaic devices. J. Am. Chem. Soc. 133, 9960–9963 (2011).10.1021/ja2036749 ↗
16. Peng, J., Gao, W., Gupta, B. K., Liu, Z., Romero-Aburto, R., Ge, L., Song, L., Alemany, L. B., Zhan, X., Gao, G., Vithayathil, S. A., Kaipparettu, B. A., Marti, A. A., Hayashi, T., Zhu, J. & Ajayan, P. M. Graphene quantum dots derived from carbon fiber. Nano Lett. 12, 844–849 (2012).10.1021/nl2038979 ↗
17. Pan, D. Y., Zhang, J. C., Li, Z. & Wu, M. H. Hydrothermal route for cutting graphene sheets into blue-luminescent graphene quantum dots. Adv. Mater. 22, 734–738 (2010).10.1002/adma.200902825 ↗
18. Riggs, J. E., Guo, Z. L., Carroll, D. & Sun, Y. P. Strong luminescence of solubilized carbon nanotubes. J. Am. Chem. Soc. 122, 5879–5880 (2000).10.1021/ja9942282 ↗
19. Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K. & Yang, Y. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nat. Mater. 4, 864–868 (2005).10.1038/nmat1500 ↗
20. Zhao, G., He, Y. & Li, Y. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization. Adv. Mater. 22, 4355–4358 (2010).10.1002/adma.201001339 ↗
21. Kumar, P. & Chand, S. Recent progress and future aspects of organic solar cells. Prog. Photovolt: Res. Appl. 20, 377–415 (2012).10.1002/pip.1141 ↗
22. Duren, J. K. J., Yang, X., Loos, J., Bulle-lieuwma, C. W. T., Sieval, A. B., Hummelen, J. C. & Janssen, R. A. J. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar cell performance. Adv. Funct. Mater. 14, 425–434 (2004).10.1002/adfm.200305049 ↗
23. Bettignes, R. D., Leroy, J., Firon, M. & Sentein, C. Accelerated lifetime measurements of P3HT:PCBM solar cells. Synth. Met. 156, 510–513 (2006).10.1016/j.synthmet.2005.06.016 ↗
24. Kim, J. Y., Kim, S. H., Lee, H., Lee, K., Ma, W., Gong, X. & Heeger, A. J. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer. Adv. Mater. 18, 572–576 (2006).10.1002/adma.200501825 ↗
25. Wang, D. H., Lee, H. K., Choi, D., Park, J. H. & Park, O. O. Solution-processable polymer solar cells from a poly(3-hexylthiophene)/[6,6]-phenyl C61-butyric acidmethyl ester concentration graded bilayers. Appl. Phys. Lett. 95, 043505 (2009).10.1063/1.3192360 ↗