Enhanced mechanical and gas barrier performance of plasticized cellulose nanofibril films
Source abstract
Abstract
Abstract Cellulose nanofibrils (CNF) are mixed with plasticizers; sorbitol and glycerol, through high-pressure homogenization to prepare multifunctional biohybrid films. The resulting plasticized films obtained after solvent evaporation are strong, flexible and demonstrate superior toughness and optical transparency. The oxygen barrier properties of the biohybrid films outperform commercial packaging materials. The sorbitol-plasticized CNF films possess excellent oxygen barrier properties, 0.34 cm3·μm/m2·day·kPa at 50 % relative humidity, while significantly enhancing the toughness and fracture strength of the films. CNF films plasticized by 20 wt.% of sorbitol and glycerol could before rupture, be strained to about 9 % and 12 %, respectively. The toughness of the plasticized films increased by ca. 300 % compared to the pristine CNF film. Furthermore, the water vapor barrier properties of the biohybrid films were also preserved by the addition of sorbitol. CNF films plasticized with sorbitol was demonstrated to simultaneously enhance fracture toughness, work of fracture, softening behavior while preserving gas barrier properties. Highly favorable thermomechanical characteristics were found with CNF/sorbitol combinations and motivate further work on this material system, for instance as a thermoformable matrix in biocomposite materials. The unique combination of excellent oxygen barrier behavior, formability and optical transparency suggest the potential of these CNF-based films as an alternative in flexible packaging of oxygen sensitive devices like thin-film transistors or organic light-emitting diode displays, gas storage applications and as barrier coatings/laminations in packaging applications, including free-standing films as aluminium-replacement in liquid board and primary packaging, as replacement for polyethylene (PE) in wrapping paper, e. g. sweats and confectionary.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Nanocomposite Films for Food Packaging · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
RISE AB , Box 5604 , Stockholm , Sweden
Funding
Seventh Framework Programme
References (61)
Show source-provided references
1. Aulin, C., Gällstedt, M., Lindström, T. (2010) Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 17(3):559–574.10.1007/s10570-009-9393-y ↗
2. Aulin, C., Salazar-Alvarez, G., Lindström, T. (2012) High strength, flexible and transparent nanofibrillated cellulose–nanoclay biohybrid films with tunable oxygen and water vapor permeability. Nanoscale 4:6622–6628.10.1039/c2nr31726e ↗
3. Burrows, P.E., Graff, G.L., Gross, M.E., Martin, P.M., Shi, M.K., Hall, M., Mast, E., Bonham, C., Bennett, W., Sullivan, M.B. (2001) Ultra barrier flexible substrates for flat panel displays. Displays 22(2):65–69.10.1016/S0141-9382(00)00064-0 ↗
4. Chinga-Carrasco, G., Syverud, K. (2012) On the structure and oxygen transmission rate of biodegradable cellulose nanobarriers. Nanoscale Res. Lett. 7(1):192.10.1186/1556-276X-7-192 ↗
5. Csiszár, E., Nagy, S. (2017) A comparative study on cellulose nanocrystals extracted frombleached cotton and flax and used for casting films with glycerol and sorbitol plasticisers. Carbohydr. Polym. 174:740–749.10.1016/j.carbpol.2017.06.103 ↗
6. Dufresne, A. (2013) Nanocellulose: a new ageless bionanomaterial. Mater. Today 16:220–227.10.1016/j.mattod.2013.06.004 ↗
7. Fall, A., Burman, A., Wågberg, L. (2014) Cellulosic nanofibrils from eucalyptus, acacia and pine fibers. Nord. Pulp Pap. Res. J. 29(1):175–184.10.3183/npprj-2014-29-01-p176-184 ↗
8. Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., Isogai, A. (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10(1):162–165.10.1021/bm801065u ↗
9. Gröndahl, M., Eriksson, L., Gatenholm, P. (2004) Material properties of plasticized hardwood xylans for potential application as oxygen barrier films. Biomacromolecules 5(4):1528–1535.10.1021/bm049925n ↗
10. Guan, Y., Yang, S., Zhang, Y., Xu, J., Han, C.C., Kotov, N.A. (2006) Fabry–Perot fringes and their application to study the film growth, chain rearrangement, and erosion of hydrogen-bonded PVPON/PAA films. J. Phys. Chem. B 110(27):13484–13490.10.1021/jp061548g ↗
11. Hansen, N.M.L., Blomfeldt, T.O.J., Hedenqvist, M.S., Plackett, D.V. (2012) Properties of plasticized composite films prepared from nanofibrillated cellulose and birch wood xylan. Cellulose 19:2015–2031.10.1007/s10570-012-9764-7 ↗
12. Henriksson, M., Berglund, L.A., Isaksson, P., Lindström, T., Nishino, T. (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9(6):1579–1585.10.1021/bm800038n ↗
13. Herrera, M.H., Mathew, A.P., Oksman, K. (2017) Barrier and mechanical properties of plasticized and cross-linked nanocellulose coatings for paper packaging applications. Cellulose 24:3969–3980.10.1007/s10570-017-1405-8 ↗
14. Hubbe, M.A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., Rojas, O.J. (2017) Nanocellulose in thin films, coatings, and plies for packaging applications: A review. BioResources 12(1):2143–2233.10.15376/biores.12.1.Hubbe ↗
15. Håkansson, K.M.O., Fall, A.B., Lundell, F., Yu, S., Krywka, C., Roth, S.V., Santoro, G., Kvick, M., Prahl Wittberg, L., Wågberg, L., Söderberg, D. (2014) Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments. Nat. Commun. 5:4018.10.1038/ncomms5018 ↗
16. Isogai, A., Saito, T., Fukuzumi, H. (2011) TEMPO-oxidized cellulose nanofibers. Nanoscale 3(1):71–85.10.1039/C0NR00583E ↗
17. Jung, Y.H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V.W., Mi, H., Kim, M., Cho, S.J., Park, D.-W., Jiang, H., Lee, J., Qiu, Y., Zhou, W., Cai, Z., Gong, S., Ma, Z. (2015) High-performance green flexible electronics based on biodegradable cellulose nanofibril paper. Nat. Commun. 6: 7170.10.1038/ncomms8170 ↗
18. Karabulut, E., Pettersson, T., Ankerfors, M., Wågberg, L. (2012) Adhesive layer-by-layer films of carboxymethylated cellulose nanofibril–dopamine covalent bioconjugates inspired by marine mussel threads. ACS Nano 6(6):4731–4739.10.1021/nn204620j ↗
19. Karasu, F., Müller, L., Ridaoui, H., Ibn ElHaj, M., Flodberg, G., Aulin, C., Axrup, L., Leterrier, Y. (2018) Organic-Inorganic hybrid planarization and water vapor barrier coatings on cellulose nanofibrils substrates. Front. Chem. 6:571.10.3389/fchem.2018.00571 ↗
20. Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., Dorris, D. (2011) Nanocelluloses: a new family of nature-based materials. Angew. Chem. 50(24):5438–5466.10.1002/anie.201001273 ↗
21. Kumar, V., Elfving, A., Koivula, H., Bousfield, D., Toivakka, M. (2016b) Roll-to-roll processed cellulose nanofiber coatings. Ind. Eng. Chem. Res. 55(12):3603–3613.10.1021/acs.iecr.6b00417 ↗
22. Kumar, V., Lazarus, E., Salminen, P., Bousfield, D., Toivakka, M. (2016a) Influence of nanolatex addition on cellulose nanofiber film properties. Nord. Pulp Pap. Res. J. 31:333–340.10.3183/npprj-2016-31-02-p333-340 ↗
23. Lange, J., Wyser, Y. (2003) Recent innovations in barrier technologies for plastic packaging-a review. Packag. Technol. Sci. 16(4):149–158.10.1002/pts.621 ↗
24. Larsson, K., Berglund, L.A., Ankerfors, M., Lindström, T. (2012) Polylactide latex/nanofibrillated cellulose bionanocomposites of high nanofibrillated cellulose content and nanopaper network structure prepared by a papermaking route. J. Appl. Polym. Sci. 125(3):2460–2466.10.1002/app.36413 ↗
25. Li, T., Song, J., Zhao, X., Yang, Z., Pastel, G., Xu, S., Jia, C., Dai, J., Chen, C., Gong, A., Jiang, F., Yao, Y., Fan, T., Yang, B., Wågberg, L., Yang, R., Hu, L. (2018) Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose. Sci. Adv. 4(3):eaar3724.10.1126/sciadv.aar3724 ↗
26. Lindström, T., Österberg, F. (2020) Evolution of biobased and nanotechnology packaging – a review. Nord. Pulp Pap. Res. J. 35(4):491–515.10.1515/npprj-2020-0042 ↗
27. Liu, X., Liu, X., Pang, J., Zhang, X., Wu, Y., Sun, R. (2013) Regenerated cellulose film with enhanced tensile strength prepared with ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc). Cellulose 20(3):1391–1399.10.1007/s10570-013-9925-3 ↗
28. Lundahl, M.J., Liu, X., Pang, J., Zhang, X., Wu, Y., Sun, R. (2016) Strength and water interactions of cellulose I filaments wet-spun from cellulose nanofibril hydrogels. Nat. Sci. Rep. 6:30695.10.1038/srep30695 ↗
29. Mabasa Bergström, E., Salmén, L., Kochumalayil, J., Berglund, L. (2012) Plasticized xyloglucan for improved toughness – Thermal and mechanical behaviour. Carbohydr. Polym. 87(4):2532–2537.10.1016/j.carbpol.2011.11.024 ↗
30. Mathew, A.P., Dufresne, A. (2002) Plasticized waxy maize starch: effect of polyols and relative humidity on material properties. Biomacromolecules 3(5):1101–1108.10.1021/bm020065p ↗
31. Mikkonen, K.S., Heikkilä, M.I., Helén, H., Hyvönen, L., Tenkanen, M. (2010) Spruce galactoglucomannan films show promising barrier properties. Carbohydr. Polym. 79(4):1107–1112.10.1016/j.carbpol.2009.10.049 ↗
32. Miller, K.S., Krochta, J.M. (1997) Oxygen and aroma barrier properties of edible films. Trends Food Sci. Technol. 8:228–237.10.1016/S0924-2244(97)01051-0 ↗
33. Moon, R.J., Martini, A., Nairn, J., Simonsen, J., Youngblood, J. (2011) Cellulose materials review: strucuture, properties and nanocomposites. Chem. Soc. Rev. 40:3941–3994.10.1039/c0cs00108b ↗
34. Mäkelä, T., Kainlauri, M., Willberg-Keyriläinen, P., Tammelin, T., Forsström, U. (2016) Fabrication of micropillars on nanocellulose films using a roll-to-roll nanoimprinting method. Microelectron. Eng. 163:1–6.10.1016/j.mee.2016.05.023 ↗
35. Möller, M., Kunz, D., Lunkenbein, T., Sommer, S., Nennemann, A., Breu, J. (2012) UV-cured, flexible, and transparent nanocomposite coating with remarkable oxygen barrier. Adv. Mater. 24(16):2142–2147.10.1002/adma.201104781 ↗
36. Nan, F., Kunz, D., Lunkenbein, T., Sommer, S., Nennemann, A., Breu, J. (2017) Enhanced toughness and thermal stability of cellulose nanocrystal iridescent films by alkali treatment. ACS Sustain. Chem. Eng. 5(10):8951–8958.10.1021/acssuschemeng.7b01749 ↗
37. Nogi, M., Iwamoto, S., Nakagaito, A.N., Yano, H. (2009) Optically transparent nanofiber paper. Adv. Mater. 20(10):1–4.10.1002/adma.200803174 ↗
38. Nyström, G., Marais, A., Karabulut, E., Wågberg, L., Cui, Y., Hamedi, M.H. (2015) Self-assembled three-dimensional and compressible interdigitated thin-film supercapacitors and batteries. Nat. Commun. 6:7259.10.1038/ncomms8259 ↗
39. Pasupuleti, S., Madras, G. (2011) Synthesis and degradation of sorbitol-based polymers. J. Appl. Polym. Sci. 121(5):2861–2869.10.1002/app.33840 ↗
40. Podsiadlo, P., Kaushik, A.K., Arruda, E.M., Waas, A.M., Shim, B.S., Xu, J., Nandivada, H., Pumplin, B.G., Lahann, J., Ramamoorthy, A., Kotov, N.A. (2007) Ultrastrong and stiff layered polymer nanocomposites. Science 318(5847):80–83.10.1126/science.1143176 ↗
41. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P.T., Ikkala, O., Lindström, T. (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8(6):1934–1941.10.1021/bm061215p ↗
42. Sehaqui, H., Liu, A., Qi, Z., Berglund, L. (2010) Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 11(9):2195–2198.10.1021/bm100490s ↗
43. Sehaqui, H., Mushi, N.E., Morimune, S., Salajkova, M., Nishino, T., Berglund, L. (2012) Cellulose nanofiber orientation in nanopaper and nanocomposites by cold drawing. ACS Appl. Mater. Interfaces 4(2):1043–1049.10.1021/am2016766 ↗
44. Sehaqui, H., Salajková, M., Zhou, Q., Berglund, L.A. (2010) Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions. Soft Matter 6(8):1824–1832.10.1039/b927505c ↗
45. Sehaqui, H., Zhou, Q., Ikkala, O., Berglund, L.A. (2011) Strong and tough cellulose nanopaper with high specific surface area and porosity. Biomacromolecules 12(10):3638–3644.10.1021/bm2008907 ↗
46. Siró, I., Plackett, D. (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17(3):459–494.10.1007/s10570-010-9405-y ↗
47. Sonia, B., Hassana, E.B., Schillingb, M.W., Mahmoudb, B. (2016) Transparent bionanocomposite films based on chitosan and TEMPO-oxidized cellulose nanofibers with enhanced mechanical and barrier properties. Carbohydr. Polym. 151:779–789.10.1016/j.carbpol.2016.06.022 ↗
48. Svagan, A.J., Samir, M.A.S.A., Berglund, L.A. (2008) Biomimetic foams of high mechanical performance based on nanostructured cell walls reinforced by native nanofibrils. Adv. Mater. 20(7):1263–1269.10.1002/adma.200701215 ↗
49. Syverud, K., Stenius, P. (2009) Strength and barrier properties of MFC films. Cellulose 16(1):75–85.10.1007/s10570-008-9244-2 ↗
50. Vieira, M.G.A., da Silva, M.A., dos Santos, L.O., Beppu, M.M. (2011) Natural-based plasticizers and biopolymer films: A review. Eur. Polym. J. 47(3):254–263.10.1016/j.eurpolymj.2010.12.011 ↗
51. Vogel, S. Comparative Biomechanics: Life’s Physical World. Princeton University Press, NJ, 2003.
52. Vollick, B., Kuo, P.-Y., Thérien-Aubin, H., Yan, N., Kumacheva, E. (2017) Composite cholesteric nanocellulose films with enhanced mechanical properties. Chem. Mater. 29(2):789–795.10.1021/acs.chemmater.6b04780 ↗
53. Walther, A., Timonen, J.V.I., Díez, I., Laukkanen, A., Ikkala, O. (2011) Multifunctional high-performance biofibers based on wet-extrusion of renewable native cellulose nanofibrils. Adv. Mater. 23(26):2924–2928.10.1002/adma.201100580 ↗
54. Wang, J., Gardner, D.J., Stark, N.M., Bousfield, D.W., Tajvidi, M., Cai, Z. (2018) Moisture and oxygen barrier properties of cellulose nanomaterial-based films. ACS Sustain. Chem. Eng. 6(1):49–70.10.1021/acssuschemeng.7b03523 ↗
55. Wu, C.-N., Saito, T., Fujisawa, S., Fukuzumi, H., Isogai, A. (2012) Ultrastrong and high gas-barrier nanocellulose/clay-layered composites. Biomacromolecules 13(6):1927–1932.10.1021/bm300465d ↗
56. Wu, Y., Liang, Y., Mei, C., Cai, L., Nadda, A., Le, Q.V., Peng, Y., Lam, S.S., Sonne, C., Xia, C. (2022) Advanced nanocellulose-based gas barrier materials: Present status and prospects. Chemosphere 286:131891.10.1016/j.chemosphere.2021.131891 ↗
57. Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., Axnäs, K. (2008) The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes. Langmuir 24(3):784–795.10.1021/la702481v ↗
58. Yang, X., Biwas, S.K., Han, J., Tanpichai, S., Li, M.-C., Chen, C., Zhu, S., Das, A.T., Yano, H. (2021) Surface and interface engineering for nanocellulosic advanced materials. Adv. Mater. 33:2002264.10.1002/adma.202002264 ↗
59. Yoo, B., Lee, C.M. (1993) Thermoprotective effect of sorbitol on proteins during dehydration. J. Agric. Food Chem. 41(2):190–192.10.1021/jf00026a008 ↗
60. Zhu, H., Luo, W., Ciesielski, P.N., Fang, Z., Zhu, J.Y., Henriksson, G., Himmel, M.E., Hu, L. (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem. Rev. 116(16):9305–9374.10.1021/acs.chemrev.6b00225 ↗
61. Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., Li, T. (2015) Anomalous scaling law of strength and toughness of cellulose nanopaper. Proc. Natl. Acad. Sci. 112(29):8971–8976.10.1073/pnas.1502870112 ↗