An ultrabright and monochromatic electron point source made of a LaB6 nanowire
Source abstract
Abstract
Electron sources in the form of one-dimensional nanotubes and nanowires are an essential tool for investigations in a variety of fields, such as X-ray computed tomography, flexible displays, chemical sensors and electron optics applications. However, field emission instability and the need to work under high-vacuum or high-temperature conditions have imposed stringent requirements that are currently limiting the range of application of electron sources. Here we report the fabrication of a LaB6 nanowire with only a few La atoms bonded on the tip that emits collimated electrons from a single point with high monochromaticity. The nanostructured tip has a low work function of 2.07 eV (lower than that of Cs) while remaining chemically inert, two properties usually regarded as mutually exclusive. Installed in a scanning electron microscope (SEM) field emission gun, our tip shows a current density gain that is about 1,000 times greater than that achievable with W(310) tips, and no emission decay for tens of hours of operation. Using this new SEM, we acquired very low-noise, high-resolution images together with rapid chemical compositional mapping using a tip operated at room temperature and at 10-times higher residual gas pressure than that required for W tips.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Rare-earth and actinide compounds · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Ghosh, P. et al. Transparent and flexible field electron emitters based on the conical nanocarbon structures. J. Am. Chem. Soc. 132, 4034–4035 (2010).10.1021/ja909346e ↗
2. Choi, W. et al. Fully sealed high brightness carbon nanotube field emission display. Appl. Phys. Lett. 75, 3129–3131 (1999).10.1063/1.125253 ↗
3. Sugie, H. et al. Carbon nanotubes as electron source in an x-ray tube. Appl. Phys. Lett. 78, 2578–2580 (2001).10.1063/1.1367278 ↗
4. Lee, Y. et al. Carbon nanotube based x-ray sources: applications in pre-clinical and medical imaging. Nucl. Instrum. Meth. A 648, S281–S283 (2011).10.1016/j.nima.2010.11.053 ↗
5. Modi, A., Koratkar, N., Lass, E., Wei, B. & Ajayan, P. Miniaturized gas ionization sensors using carbon nanotubes. Nature 424, 171–174 (2003).10.1038/nature01777 ↗
6. Sadeghian, R. & Islam, M. Ultralow voltage field ionization discharge on whiskered silicon nanowires for gas-sensing applications. Nature Mater. 10, 135–140 (2011).10.1038/nmat2944 ↗
7. de Jonge, N., Lamy, Y., Schoots, K. & Oosterkamp, T. High brightness electron beam from a multi-walled carbon nanotube. Nature 420, 393–395 (2002).10.1038/nature01233 ↗
8. Houdellier, F., Masseboeuf, A., Monthioux, M. & Hytch, M. New carbon cone nanotip for use in a highly coherent cold field emission electron microscope. Carbon 50, 2037–2044 (2012).10.1016/j.carbon.2012.01.023 ↗
9. de Jonge, N., Allioux, M., Oostveen, J., Teo, K. & Milne, W. Optical performance of carbon nanotube electron sources. Phys. Rev. Lett. 94, 186807 (2005).10.1103/PhysRevLett.94.186807 ↗
10. Yeong, K. & Thong, J. Life cycle of a tungsten cold field emitter. J. Appl. Phys. 99, 104903 (2006).10.1063/1.2197267 ↗
11. Kasuya, K., Katagiri, S. & Ohshima, T. Stabilization of a tungsten <310> cold field emitter. J. Vac. Sci. Technol. B 28, L55–L60 (2010).10.1116/1.3488988 ↗
12. Schwind, G., Magera, G. & Swanson, L. Comparison of parameters for schottky and cold field emission sources. J. Vac. Sci. Technol. B 24, 2897–2901 (2006).10.1116/1.2366675 ↗
13. Intaraprasonk, V., Xin, H. & Muller, D. Analytic derivation of optimal imaging conditions for incoherent imaging in aberration corrected electron microscopes. Ultramicroscopy 108, 1454–1466 (2008).10.1016/j.ultramic.2008.05.013 ↗
14. Pennycook, S. & Nellist, P. Scanning Transmission Electron Microscopy (Springer, 2011).10.1007/978-1-4419-7200-2 ↗
15. Krivanek, O. et al. Atom by atom structural and chemical analysis by annular dark field electron microscopy. Nature 464, 571–574 (2010).10.1038/nature08879 ↗
16. Ahmed, H. & Broers, A. Lanthanum hexaboride electron emitter. J. Appl. Phys. 43, 2185–2192 (1972).10.1063/1.1661472 ↗
17. Uijttewaal, M., Wijs, G. & Groot, R. Ab initio and work function and surface energy anisotropy of LaB6 . J. Phys. Chem. B 110, 18459–18465 (2006).10.1021/jp063347i ↗
18. Futamoto, M., Hosoki, S., Okano, H. & Kawabe, U. Field emission and field ion microscopy of lanthanum hexaboride. J. Appl. Phys. 48, 3541–3546 (1977).10.1063/1.324151 ↗
19. Nagata, H., Harada, K. & Shimizu, R. Thermal field emission observation of single crystal LaB6 . J. Appl. Phys. 68, 3614–3618 (1990).10.1063/1.346322 ↗
20. Zhang, H. et al. Nanostructured LaB6 field emitter with lowest apical work function. Nano Lett. 10, 3539–3544 (2010).10.1021/nl101752z ↗
21. Zhang, H., Zhang, Q., Tang, J. & Qin, L. Single crystalline LaB6 nanowires. J. Am. Chem. Soc. 127, 2862–2863 (2005).10.1021/ja043512c ↗
22. Zhang, H. et al. Field emission of electrons from single LaB6 nanowires. Adv. Mater. 18, 87–91 (2006).10.1002/adma.200500508 ↗
23. Brewer, J., Deo, N., Wang, Y. & Cheung, C. Lanthanum hexaboride nanoobelisks. Chem. Mater. 19, 6379–6381 (2007).10.1021/cm702315x ↗
24. Amin, S., Li, S., Roth, J. & Xu, T. Single crystalline alkaline earth metal hexaboride one dimensional (1D) nanostructures: synthesis and characterization. Chem. Mater. 21, 763–770 (2009).10.1021/cm802018e ↗
25. Fujita, S. Electron gun technologies for high resolution electron microscopes. J. Vac. Soc. Jpn 55, 64–72 (2012).10.3131/jvsj2.55.64 ↗
26. Fursey, G. Field Emission In Vacuum Microelectronics (Kluwer Academic, 2005).
27. Qian, W., Scheinfein, M. & Spence, J. Brightness measurement of nanometer sized field emission electron sources. J. Appl. Phys. 73, 7041–7045 (1993).10.1063/1.352371 ↗
28. de Jonge, N. et al. Characterization of the field emission properties of individual thin carbon nanotubes. Appl. Phys. Lett. 85, 1607–1609 (2004).10.1063/1.1786634 ↗
29. Nishitani, R. et al. Surface structures and work functions of the LaB6 (100), (110) and (111) clean surfaces. Sur. Sci. 93, 535–549 (1980).10.1016/0039-6028(80)90281-2 ↗
30. Bronsgeest, M., Barth, J., Swanson, L. & Kruit, P. Probe current, probe size, and the practical brightness for probe forming systems. J. Vac. Sci. Technol. B 26, 949–955 (2008).10.1116/1.2907780 ↗
31. Swanson, L. & Schwind, G. A review of the cold field electron cathode. Adv. Imag. Elect. Phys. 159, 63–98 (2009).10.1016/S1076-5670(09)59002-7 ↗
32. Orloff, J. Handbook of charged particle optics (CRC Press, 2009).
33. Chang, C., Kuo, H., Hwang, I. & Tsong, T. A fully coherent electron beam from a noble metal covered W(111) single atom emitter. Nanotechnology 20, 115401 (2009).10.1088/0957-4484/20/11/115401 ↗
34. Oshima, C., Rokuta, E., Itagaki, T., Ishikawa, T. & Cho, B. Demountable single atom electron source. e-J. Surf. Sci. Nanotech. 3, 412–416 (2005).10.1380/ejssnt.2005.412 ↗
35. Swanson, L. & Martin, N. Field electron cathode stability studies: zirconium/tungsten thermal field cathode. J. Appl. Phys. 46, 2029–2050 (1975).10.1063/1.321893 ↗
36. Toda, Y. et al. Work function of a room temperature stable electride [Ca24Al28O64]4+(e−)4 . Adv. Mater. 19, 3564–3569 (2007).10.1002/adma.200700663 ↗
37. Zhou, Y. et al. A universal method to produce low work function electrodes for organic electronics. Science 336, 327–332 (2012).10.1126/science.1218829 ↗