High thermal conductivity of chain-oriented amorphous polythiophene
Source abstract
Abstract
Polymers are usually considered thermal insulators, because the amorphous arrangement of the molecular chains reduces the mean free path of heat-conducting phonons. The most common method to increase thermal conductivity is to draw polymeric fibres, which increases chain alignment and crystallinity, but creates a material that currently has limited thermal applications. Here we show that pure polythiophene nanofibres can have a thermal conductivity up to ∼ 4.4 W m(-1) K(-1) (more than 20 times higher than the bulk polymer value) while remaining amorphous. This enhancement results from significant molecular chain orientation along the fibre axis that is obtained during electropolymerization using nanoscale templates. Thermal conductivity data suggest that, unlike in drawn crystalline fibres, in our fibres the dominant phonon-scattering process at room temperature is still related to structural disorder. Using vertically aligned arrays of nanofibres, we demonstrate effective heat transfer at critical contacts in electronic devices operating under high-power conditions at 200 °C over numerous cycles.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · Carbon Nanotubes in Composites · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Choy, C. L. Thermal conductivity of polymers. Polymer 18, 984–1004 (1977).10.1016/0032-3861(77)90002-7 ↗
2. Henry, A. Thermal transport in polymers. Ann. Rev. Heat Transfer http://dx.doi.org/10.1615/AnnualRevHeatTransfer.2013006949 (2013).10.1615/AnnualRevHeatTransfer.2013006949 ↗
3. Han, Z. D. & Fina, A. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog. Polym. Sci. 36, 914–944 (2011).10.1016/j.progpolymsci.2010.11.004 ↗
4. Wang, X., Ho, V., Segalman, R. A. & Cahill, D. G. Thermal conductivity of high-modulus polymer fibers. Macromolecules 46, 4937–4943 (2013).10.1021/ma400612y ↗
5. Liu, J. & Yang, R. Length-dependent thermal conductivity of single extended polymer chains. Phys. Rev. B 86, 104307 (2012).10.1103/PhysRevB.86.104307 ↗
6. Arkadii, A., Michael, B., Oleg, G. & Eyal, Z. Effect of supramolecular structure on polymer nanofibre elasticity. Nature Nanotech. 2, 59–62 (2007).10.1038/nnano.2006.172 ↗
7. Choy, C. L., Wong, Y. W., Yang, G. W. & Kanamoto, T. Elastic modulus and thermal conductivity of ultradrawn polyethylene. J. Polym. Sci. 37, 3359–3367 (1999).10.1002/(SICI)1099-0488(19991201)37:23<3359::AID-POLB11>3.0.CO;2-S ↗
8. Lim, C., Tan, E. & Ng, S. Effects of crystalline morphology on the tensile properties of electrospun polymer nanofibers. Appl. Phys. Lett. 92, 141908 (2008).10.1063/1.2857478 ↗
9. Choy, C. L., Chen, F. C. & Luk, W. H. Thermal conductivity of oriented crystalline polymers. J. Polym. Sci. 18, 1187–1207 (1980).
10. Papkov, D. et al. Simultaneously strong and tough ultrafine continuous nanofibers. ACS Nano 7, 3324–3331 (2013).10.1021/nn400028p ↗
11. Prasher, R. Thermal interface materials: historical perspective, status, and future directions. Proc. IEEE 94, 1571–1586 (2006).10.1109/JPROC.2006.879796 ↗
12. Kurabayashi, K., Asheghi, M., Touzelbaev, M. & Goodson, K. E. Measurement of the thermal conductivity anisotropy in polyimide films. J. Microelectromech. Syst. 8, 180–191 (1999).10.1109/84.767114 ↗
13. Lu, G. et al. Drying enhanced adhesion of polythiophene nanotubule arrays on smooth surfaces. ACS Nano 2, 2342–2348 (2008).10.1021/nn800443m ↗
14. Xiao, R., Cho, S. I., Liu, R. & Lee, S. B. Controlled electrochemical synthesis of conductive polymer nanotube structures. J. Am. Chem. Soc. 129, 4483–4489 (2007).10.1021/ja068924v ↗
15. Martin, C. R. Nanomaterials: a membrane-based synthetic approach. Science 266, 1961–1966 (1994).10.1126/science.266.5193.1961 ↗
16. Cannon, J. P., Bearden, S. D. & Gold, S. A. Effect of wetting solvent on poly (3-hexylthiophene)(P3HT) nanotubles fabricated via template wetting. Synth. Met. 160, 2623–2627 (2010).10.1016/j.synthmet.2010.10.014 ↗
17. Shen, S., Henry, A., Tong, J., Zheng, R. & Chen, G. Polyethylene nanofibres with very high thermal conductivities. Nature Nanotech. 5, 251–255 (2010).10.1038/nnano.2010.27 ↗
18. Bazzaoui, E. A. et al. SERS spectra of polythiophene in doped and undoped states. J. Phys. Chem. 99, 6628–6634 (1995).10.1021/j100017a052 ↗
19. Louarn, G., Buisson, J. P., Lefrant, S. & Fichou, D. Vibrational studies of a series of alpha-oligothiophenes as model systems of polythiophene. J. Phys. Chem. 99, 11399–11404 (1995).10.1021/j100029a016 ↗
20. Shi, L. et al. Measuring thermal and thermoelectric properties of one-dimensional nanostructures using a microfabricated device. J. Heat Transfer 125, 881–888 (2003).10.1115/1.1597619 ↗
21. Cahill, D. G., Watson, S. K. & Pohl, R. O. Lower limit to the thermal conductivity of disordered crystals. Phys. Rev. B 46, 6131–6140 (1992).10.1103/PhysRevB.46.6131 ↗
22. Bullen, A. J., O'Hara, K. E., Cahill, D. G., Monteiro, O. & von Keudell, A. Thermal conductivity of amorphous carbon thin films. J. Appl. Phys. 88, 6317–6320 (2000).10.1063/1.1314301 ↗
23. Liu, X. et al. High thermal conductivity of a hydrogenated amorphous silicon film. Phys. Rev. Lett. 102, 035901 (2009).10.1103/PhysRevLett.102.035901 ↗
24. Allen, P. B., Feldman, J. L., Fabian, J. & Wooten, F. Diffusons, locons and propagons: character of atomic vibrations in amorphous Si. Phil. Mag. B 79, 1715–1731 (1999).10.1080/13642819908223054 ↗
25. Feldman, J. L., Kluge, M. D., Allen, P. B. & Wooten, F. Thermal conductivity and localization in glasses: numerical study of a model of amorphous silicon. Phys. Rev. B 48, 12589–12602 (1993).10.1103/PhysRevB.48.12589 ↗
26. Regner, K. T. et al. Broadband phonon mean free path contributions to thermal conductivity measured using frequency domain thermoreflectance. Nature Commun. 4, 1640 (2013).10.1038/ncomms2630 ↗
27. Osinin, S. & Nosov, M. Relation between the speed of sound and the orientation of chain molecules in anisotropic systems. Mech. Compos. Mater. 2, 4–6 (1966).
28. Cola, B. A. et al. Photoacoustic characterization of carbon nanotube array thermal interfaces. J. Appl. Phys. 101, 054313 (2007).10.1063/1.2510998 ↗
29. Mohammad, F., Calvert, P. D. & Billingham, N. C. Thermal stability of electrochemically prepared polythiophene and polypyrrole. Bull. Mater. Sci. 18, 255–261 (1995).10.1007/BF02749663 ↗
30. Otiaba, K. et al. Thermal interface materials for automotive electronic control unit: trends, technology and R&D challenges. Microelectron. Reliab. 51, 2031–2043 (2011).10.1016/j.microrel.2011.05.001 ↗
31. Cahill, D. G. & Pohl, R. O. Heat flow and lattice vibrations in glasses. Solid State Commun. 70, 927–930 (1989).10.1016/0038-1098(89)90630-3 ↗
32. Choy, C. L., Tong, K. W., Wong, H. K. & Leung, W. P. Thermal conductivity of amorphous alloys above room temperature. J. Appl. Phys. 70, 4919–4925 (1991).10.1063/1.349037 ↗
33. Taphouse, J. H. et al. Carbon nanotube thermal interfaces enhanced with sprayed on nanoscale polymer coatings. Nanotechnology 24, 105401 (2013).10.1088/0957-4484/24/10/105401 ↗
34. Taphouse, J. H., Smith, O. N. L., Marder, S. R. & Cola, B. A. A pyrenylpropyl phosphonic acid surface modifier for mitigating the thermal resistance of carbon nanotube contacts. Adv. Funct. Mater. 24, 465–471 (2014).10.1002/adfm.201301714 ↗