Suppression of PCBM dimer formation in inverted perovskite solar cells
Source abstract
Abstract
Achieving a well-controlled electron-selective layer is critical for the device scalability and performance of perovskite solar cells. While phenyl-C61-butyric acid methyl ester (PCBM) is a promising electron-selective material in inverted perovskite solar cells, its dimerization under environmental stress accelerates the material degradation and complicates producing high-quality PCBM layers, thereby compromising device long-term operational stability and scale-up fabrication. Here we investigated the PCBM molecular stacking on perovskite surfaces, finding that the variability in perovskite surface termination leads to orientation and distribution heterogeneity of the PCBM layer, resulting in undesirable dimerization. To address this, we developed a molecular dopant for suppressing PCBM dimer formation, achieving a certified efficiency of 26.4% in laboratory-scale devices and 25.3% in 1 cm2 devices. Furthermore, these devices maintained 93% of their initial power conversion efficiency after 1,500 h of ageing at 85 °C following the ISOS L-2I protocol.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Chen, H. et al. Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands. Science 384, 189–193 (2024).10.1126/science.adm9474 ↗
2. Wei, P. et al. Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact. Science 379, 683–690 (2023).10.1126/science.ade3126 ↗
3. Liu, C. et al. Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells. Science 382, 810–815 (2023).10.1126/science.adk1633 ↗
4. Liu, C. et al. Two-dimensional perovskitoids enhance stability in perovskite solar cells. Nature 633, 359–364 (2024).10.1038/s41586-024-07764-8 ↗
5. Zhu, P. et al. Aqueous synthesis of perovskite precursors for highly efficient perovskite solar cells. Science 383, 524–531 (2024).10.1126/science.adj7081 ↗
6. Liang, Z. et al. Homogenizing out-of-plane cation composition in perovskite solar cells. Nature 624, 557–563 (2023).10.1038/s41586-023-06784-0 ↗
7. Jiang, Q. et al. Surface reaction for efficient and stable inverted perovskite solar cells. Nature 611, 278–283 (2022).10.1038/s41586-022-05268-x ↗
8. Yu, S. et al. Homogenized NiOx nanoparticles for improved hole transport in inverted perovskite solar cells. Science 382, 1399–1404 (2023).10.1126/science.adj8858 ↗
9. Wang, W. T. et al. Water- and heat-activated dynamic passivation for perovskite photovoltaics. Nature 632, 294–300 (2024).10.1038/s41586-024-07705-5 ↗
10. Tan, Q. et al. Inverted perovskite solar cells using dimethylacridine-based dopants. Nature 620, 545–551 (2023).10.1038/s41586-023-06207-0 ↗
11. Liu, S. et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 632, 536–542 (2024).10.1038/s41586-024-07723-3 ↗
12. Li, Z. et al. Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells. Science 382, 284–289 (2023).10.1126/science.ade9637 ↗
13. Zhao, K. et al. peri-Fused polyaromatic molecular contacts for perovskite solar cells. Nature 632, 301–306 (2024).10.1038/s41586-024-07712-6 ↗
14. Park, S. M. et al. Low-loss contacts on textured substrates for inverted perovskite solar cells. Nature 624, 289–294 (2023).10.1038/s41586-023-06745-7 ↗
15. Zhang, S. et al. Minimizing buried interfacial defects for efficient inverted perovskite solar cells. Science 380, 404–409 (2023).10.1126/science.adg3755 ↗
16. Shao, Y., Yuan, Y. & Huang, J. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells. Nat. Energy 1, 15001 (2016).10.1038/nenergy.2015.1 ↗
17. Uddin, M. A. et al. Blading of conformal electron-transport layers in p-i-n perovskite solar cells. Adv. Mater. 34, 2202954 (2022).10.1002/adma.202202954 ↗
18. Krückemeier, L., Krogmeier, B., Liu, Z., Rau, U. & Kirchartz, T. Understanding transient photoluminescence in halide perovskite layer stacks and solar cells. Adv. Energy Mater. 11, 2003489 (2021).10.1002/aenm.202003489 ↗
19. Shao, Y., Xiao, Z., Bi, C., Yuan, Y. & Huang, J. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells. Nat. Commun. 5, 5784 (2014).10.1038/ncomms6784 ↗
20. You, S. et al. Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules. Science 379, 288–294 (2023).10.1126/science.add8786 ↗
21. Dzwilewsk, A. et al. Photo-induced and resist-free imprint patterning of fullerene materials for use in functional electronics. J. Am. Chem. Soc. 131, 4006–4011 (2009).10.1021/ja807964x ↗
22. Rao, A. M. et al. Photoinduced polymerization of solid C60 films. Science 259, 955–957 (1993).10.1126/science.259.5097.955 ↗
23. Pont, S., Foglia, F., Higgins, A. M., Durrant, J. R. & Cabral, J. T. Stability of polymer:PCBM thin films under competitive illumination and thermal stress. Adv. Funct. Mater. 28, 1802520 (2018).10.1002/adfm.201802520 ↗
24. Heumueller, T. et al. Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability. Energy Environ. Sci. 9, 247–256 (2016).10.1039/C5EE02912K ↗
25. Zhang, M. et al. Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells. Nat. Commun. 10, 4593 (2019).10.1038/s41467-019-12613-8 ↗
26. Liu, T. & Dennis, T. J. S. Conformational analysis of [60]PCBM from DFT simulations of electronic energies, bond strain and the 13C NMR spectrum: input geometry determination and ester bond rotation dynamics. C 7, 1–13 (2021).
27. Liu, T., Misquitta, A. J., Abrahams, I. & Dennis, T. J. S. Characterization of the fullerene derivative [60]PCBM, by high-field carbon, and two-dimensional NMR spectroscopy, coupled with DFT simulations. Carbon 173, 891–900 (2021).10.1016/j.carbon.2020.11.052 ↗
28. Tanaka, M. & Young, R. J. Review polarised Raman spectroscopy for the study of molecular orientation distributions in polymers. J. Mater. Sci. 41, 963–991 (2006).10.1007/s10853-006-6595-7 ↗
29. Liu, Y. et al. Angle-resolved polarized Raman spectra of the basal and edge plane of MoS2. Opt. Express 29, 32818–32825 (2021).10.1364/OE.435835 ↗
30. Menéndez, J., Page, J. B. in Light Scattering in Solids VIII. Topics in Applied Physics Vol. 76 (eds Cardona, M. & Güntherodt, G.) Ch. 2 (Springer, 2000).
31. Lin, M. L. et al. Understanding angle-resolved polarized Raman scattering from black phosphorus at normal and oblique laser incidences. Sci. Bull. 65, 1894–1900 (2020).10.1016/j.scib.2020.08.008 ↗
32. Liu, X.-L., Zhang, X., Lin, M.-L. & Tan, P.-H. Different angle-resolved polarization configurations of Raman spectroscopy: a case on the basal and edge plane of two-dimensional materials. Chin. Phys. B 26, 067802 (2017).10.1088/1674-1056/26/6/067802 ↗
33. Wei, Q. et al. Surface-segregated monolayers: A new type of ordered monolayer for surface modification of organic semiconductors. J. Am. Chem. Soc. 131, 17597–17604 (2009).10.1021/ja9057053 ↗
34. Ye, F. et al. Overcoming C60-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane. Nat. Commun. 13, 7454 (2022).10.1038/s41467-022-34203-x ↗
35. Awni, R. A. et al. Influence of charge transport layers on capacitance measured in halide perovskite solar cells. Joule 4, 644–657 (2020).10.1016/j.joule.2020.01.012 ↗
36. Gong, C. et al. Silver coordination-induced n-doping of PCBM for stable and efficient inverted perovskite solar cells. Nat. Commun. 15, 4922 (2024).10.1038/s41467-024-49395-7 ↗
37. Ighodalo, K. O. et al. Negligible ion migration in tin-based and tin-doped perovskites. Angew. Chem. Int. Ed. 62, e202213932 (2023).10.1002/anie.202213932 ↗
38. Xing, Z. et al. Bowl-assisted ball assembly for solvent-processing the C60 electron transport layer of high-performance inverted perovskite solar cell. Angew. Chem. Int. Ed. 62, e202305357 (2023).10.1002/anie.202305357 ↗
39. Hori, T. et al. Synthesis of halogen-bond-donor-site-introduced functional monomers through wittig reaction of perfluorohalogenated benzaldehydes: toward digitalization as reliable strategy in small-molecule synthesis. Synlett 34, 2455–2460 (2023).10.1055/a-2118-6813 ↗
40. Khenkin, M. V. et al. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures. Nat. Energy 5, 35–49 (2020).10.1038/s41560-019-0529-5 ↗
41. Ni, Z. et al. Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells. Science 367, 1352–1358 (2020).10.1126/science.aba0893 ↗
42. Pracht, P. et al. CREST—a program for the exploration of low-energy molecular chemical space. J. Chem. Phys. 160, 114110 (2024).10.1063/5.0197592 ↗
43. Spicher, S. et al. Robust atomistic modeling of materials, organometallic, and biochemical systems. Angew. Chem. Int. Ed. 59, 15665–15673 (2020).10.1002/anie.202004239 ↗
44. Neese, F. Software update: the ORCA program system—version 5.0. WIRES Comput. Mol. Sci. 12, e1606 (2022).10.1002/wcms.1606 ↗
45. Grimme, S. et al. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H–Pu. J. Chem. Phys. 132, 154104 (2010).10.1063/1.3382344 ↗
46. Thompson, A. P. et al. LAMMPS—a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales. Comput. Phys. Commun. 271, 108171 (2022).10.1016/j.cpc.2021.108171 ↗
47. Verlet, L. Computer “experiments” on classical fluids. I. Thermodynamical properties of lennard-jones molecules. Phys. Rev. 159, 98–103 (1967).10.1103/PhysRev.159.98 ↗
48. Nosé, S. A unified formulation of the constant temperature molecular dynamics methods. J. Chem. Phys. 81, 511–519 (1984).10.1063/1.447334 ↗
49. Hoover, W. G. Canonical dynamics: equilibrium phase-space distributions. Phys. Rev. A 31, 1695–1697 (1985).10.1103/PhysRevA.31.1695 ↗
50. Martínez, L. et al. PACKMOL: a package for building initial configurations for molecular dynamics simulations. J. Comput. Chem. 30, 2157–2164 (2009).10.1002/jcc.21224 ↗
51. Zhou, H. et al. Competing dissolution pathways and ligand passivation-enhanced interfacial stability of hybrid perovskites with liquid water. ACS Appl. Mater. Interfaces 12, 23584–23594 (2020).10.1021/acsami.0c03532 ↗
52. He, X. et al. A fast and high-quality charge model for the next generation general AMBER force field. J. Chem. Phys. 153, 114502 (2020).10.1063/5.0019056 ↗
53. Raptis, V. et al. Interface modelling for (CH3)3SPbI3 and (NH2)2CHPbI3 perovskite layers. J. Phys. Chem. Solids 180, 111383 (2023).10.1016/j.jpcs.2023.111383 ↗
54. Bayly, C. I. et al. A well-behaved electrostatic potential based method using charge restraints for deriving atomic charges: the RESP model. J. Phys. Chem. 97, 10269–10280 (1993).10.1021/j100142a004 ↗
55. Kresse, G. et al. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).10.1103/PhysRevB.54.11169 ↗