journal article·2026-05-26Open access

Positional Isomer Engineering for Crystallization Kinetics Control in Wide‐Bandgap Perovskite Solar Cells

Jun Chu, Chaoqi Liu, Xi Yang, Xiuhua Chen, Tao Zhu, Shaoyuan Li, Zhongqiu Tong, Huidong Ma, Jianjun Zhang, Jianghui Zheng, Wenhui Ma, Jessica Yajie Jiang

Abstract

ABSTRACT Relative positioning of functional groups in molecular additives and its impact on defect passivation in perovskite solar cells remains insufficiently understood. Here, we systematically investigate three diaminobenzenesulfonic acid (DABSA) isomers (2,4‐DABSA, 2,5‐DABSA, and 3,4‐DABSA) as model additives and reveal the critical role of the spatial arrangement between amino and sulfonic acid groups in enabling synergistic passivation. Among them, the ortho‐para‐substituted 2,4‐DABSA exhibits the strongest interaction with the perovskite precursor, inducing a distinct “fast nucleation followed by slow crystallization” kinetics. This dynamic control suppresses the formation of vacancies and grain boundaries by allowing ordered lattice arrangement, yielding 1.68 eV (FA₀.₇₇MA₀.₂₃)₀.₉₅Cs₀.₀₅Pb(I₀.₇₇Br₀.₂₃)₃ perovskite films, which exhibit a significantly reduced defect density. Notably, in‐situ photoluminescence measurements confirm that 2,4‐DABSA effectively suppresses light‐induced phase segregation under combined light and thermal stress (1‐sun at 65°C). Consequently, the 2,4‐DABSA‐modified device achieved a champion PCE of 23.48% and significantly enhanced operational stability. The unencapsulated devices retain 93.00%, 90.12%, and 80.23% of their initial efficiency after 1000 h of aging at 85°C/35% RH, 20°C/80% RH, and 85°C/80% RH, respectively. This work demonstrates that isomer selection adds a crucial dimension beyond functional group engineering, providing new insights for overcoming the stability bottlenecks in wide‐bandgap perovskite photovoltaics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Metallurgical and Energy Engineering Kunming University of Science and Technology Kunming China

Yunnan Energy Investment Green New Materials Co., Ltd. Kunming China

School of Engineering Yunnan University Kunming China

Qujing JA Solar Technology Co., Ltd. Qujing China

School of Electronic Science and Engineering Xiamen University Xiamen China

School of Photovoltaic and Renewable Energy Engineering University of New South Wales Kensington New South Wales Australia

Funding

National Natural Science Foundation of China

References (64)

Show source-provided references
1. Challenges and Optimization Strategies for High‐Performance Wide‐Bandgap Perovskite Solar Cells10.1002/aenm.202504777 ↗
2. Reducing Nonradiative Recombination for Highly Efficient Inverted Perovskite Solar Cells via a Synergistic Bimolecular Interface10.1038/s41467-024-50019-3 ↗
3. Achievements, Challenges, and Future Prospects for Industrialization of Perovskite Solar Cells10.1038/s41377-024-01461-x ↗
4. Compacting Molecular Stacking and Inhibiting Self‐Aggregation in Fullerene Transporting Layer for Efficient and Stable Perovskite Solar Cells10.1002/anie.202502950 ↗
5. Regulation of Wide Bandgap Perovskite by Rubidium Thiocyanate for Efficient Silicon/Perovskite Tandem Solar Cells10.1002/adma.202407681 ↗
6. Surface Sulfidation Constructing Gradient Heterojunctions for High‐Efficiency (Approaching 18%) HTL‐Free Carbon‐Based Inorganic Perovskite Solar Cells10.1002/cey2.586 ↗
7. Recent Advances in Wide‐Bandgap Perovskite Solar Cells10.1002/adma.202418622 ↗
8. Morphologically Uniform Electron Transport Layer Incorporating Conjugated Polymer for Efficient Charge Extraction in Tin Perovskite Solar Cells10.1002/cey2.70123 ↗
9. Regulating the Crystallization Process of Intermediate Phase for Wide‐Bandgap Perovskite Reduces Open‐Circuit Voltage Deficit10.1021/acsenergylett.4c03219 ↗
10. Grain Boundary Engineering Enables 22.2%‐Efficient Inverted Wide‐Bandgap Perovskite Solar Cells in Ambient Air10.1021/acsnano.5c15499 ↗
11. Bulk Defects Passivation of Tin Halide Perovskite by Tin Thiocyanate10.1002/cey2.710 ↗
12. Non‐Fullerene Electron‐Transporting Materials for High‐Performance and Stable Perovskite Solar Cells10.1038/s41563-025-02163-4 ↗
13. Multidentate Fullerenes Enable Tunable and Robust Interfacial Bonding for Efficient Tin‐Based Perovskite Solar Cells10.1002/adma.202410248 ↗
14. Spatially Isomeric Fulleropyrrolidines Enable Controlled Stacking of Perovskite Colloids for High‐Performance Tin‐Based Perovskite Solar Cells10.1002/anie.202420150 ↗
15. Improving Crystallization of Wide‐Bandgap Lead Halide Perovskite for All‐Perovskite Tandems10.1002/aenm.202404180 ↗
16. Exceeding 15% Performance With Energy Level Tuning in Tin‐Based Perovskite Solar Cells10.1021/acsenergylett.4c03172 ↗
17. Performance‐Enhancing Strategies for Wide‐Bandgap Perovskite Solar Cells and Their Tandem Applications10.1021/acsenergylett.5c03639 ↗
18. Photo‐Homogenization Assisted Segregation Easing Technique (PHASET) for Highly Efficient and Stable Wide‐Bandgap Perovskite Solar Cells10.1038/s41467-025-63176-w ↗
19. High‐Entropy Hybrid Perovskites With Disordered Organic Moieties for Perovskite Solar Cells10.1038/s41566-024-01468-1 ↗
20. Surface Chemical Conversion of Residual PbI2 Enables Efficient and Stable Perovskite Solar Cells by 1,3‐Diphenyl‐Benzimidazolium Iodide Treatment10.1002/adfm.202418792 ↗
21. Uniform Phase Distribution of Wide Bandgap Perovskite for High‐Performance Perovskite‐Silicon Tandem Solar Cells10.1038/s41467-025-66480-7 ↗
22. Tuning Isomerism Effect in Organic Bulk Additives Enables Efficient and Stable Perovskite Solar Cells10.1007/s40820-024-01613-z ↗
23. Amidino‐Based Ligand Enables Oriented Crystallization and Boosted Carrier Extraction for Inverted Perovskite Solar Cells and Modules10.1016/j.joule.2025.102044 ↗
24. Synergistic Dipole‐Defect Engineering via Sulfonic Molecular Bridge Boosts Voltage in Wide‐Bandgap Perovskite and All‐Perovskite Tandem Solar Cells10.1021/acsnano.5c04978 ↗
25. Defect Suppression via Tailoring Functionalized Additives for Efficient and Stable CsPbI₃ Perovskite Solar Cells
26. Multifunctional Cellulose Derivative Enables Efficient and Stable Wide‐Bandgap Perovskite Solar Cells by Inhibiting Ion Migration
27. Improving the Photovoltaic Properties and Stability of Inverted Perovskite Solar Cells With Hydroxylamine‐Based Additives10.1002/admi.202300449 ↗
28. Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells10.1002/adfm.202314529 ↗
29. Dual Interface Passivation With Multi‐Site Regulation Toward Efficient and Stable Inverted Perovskite Solar Cells10.1002/aenm.202406046 ↗
30. Perovskite Oxides as Electrocatalysts for Water Electrolysis: From Crystalline to Amorphous10.1002/cey2.595 ↗
31. Sustainable Molecular Passivation via Heat‐Induced Disaggregation and Redox Reactions for Inverted Perovskite Solar Cells10.1021/acsenergylett.4c02220 ↗
32. 2‐Aminobenzenesulfonate Acid as an Efficient Multifunctional Additive for High‐Performance Perovskite Solar Cells10.1016/j.cej.2025.166341 ↗
33. Simultaneous Interfacial Modification and Crystallization Control by Biguanide Hydrochloride for Stable Perovskite Solar Cells With PCE of 24.4%10.1002/adma.202106118 ↗
34. Enhanced Interface Regulation via π‐conjugated Heterojunctions for High‐Efficiency Inverted Perovskite Solar Cells
35. Isomers With Synergistic Effects of Multiple Functional Groups Enabling High‐Performance Perovskite Solar Cells10.1016/j.jechem.2025.06.038 ↗
36. Isomer‐Engineering of Pyridine Amidinium for Efficient Bifacial Perovskite/Silicon Tandem Solar Cells10.1016/j.nanoen.2025.111520 ↗
37. Isomerizing Passivators in Perovskite Solar Cells: The Impact of Molecular Spatial Configuration10.1021/acsmaterialslett.4c02453 ↗
38. Activate Whole‐Body Passivation Ability of Small Isomeric D‐π‐A Molecules via Amino Position Effect to Improve the Photovoltaic Performance of Perovskite Solar Cells10.1016/j.cej.2022.139321 ↗
39. A Dual‐Functional Coordination Additive for Defect Passivation and Large‐Grain Formation in Perovskite Film10.1002/adfm.202510831 ↗
40. Suppressing Open‐Circuit Voltage Loss in Perovskite Solar Cells via Ligand‐Assisted Crystallization Dynamics Regulation Strategy10.1002/adma.202511111 ↗
41. Engineering Ligand Reactivity Enables High‐Temperature Operation of Stable Perovskite Solar Cells10.1126/science.adi4107 ↗
42. Realizing Stable Perovskite Solar Cells With Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation10.1002/adma.202313673 ↗
43. Cross‐Layer All‐Interface Defect Passivation With Pre‐Buried Additive Toward Efficient All‐Inorganic Perovskite Solar Cells10.1002/cey2.566 ↗
44. Control of Crystal Growth Toward Scalable Fabrication of Perovskite Solar Cells10.1002/adfm.201807047 ↗
45. Efficient and Stable Tin–Lead Perovskite Photoconversion Devices Using Dual‐Functional Cathode Interlayer10.1002/aenm.202302555 ↗
46. Fluorinated Pyrimidine Bridged Buried Interface for Stable and Efficient Wide‐Bandgap Perovskite Solar Cells10.1002/adfm.202417310 ↗
47. The Role of Halide Oxidation in Perovskite Halide Phase Separation10.1016/j.joule.2021.07.011 ↗
48. Soft Conjugation Extension Strategy of Self‐Assembled Molecules for Achieving Efficient and Mechanically Stable Flexible Perovskite Solar Cells10.1039/D5EE03823E ↗
49. Suppressing Halide Segregation via Pyridine‐Derivative Isomers Enables Efficient 1.68 eV Bandgap Perovskite Solar Cells10.1002/adma.202311923 ↗
50. Synchronous Dimension‐Crystallization Engineering Enables Highly Efficient 2D/3D Tin Perovskite Solar Cells10.1039/D4EE06142J ↗
51. Revealing Collaborative Effects of Binary Additives on Regulating Precursor Crystallization Toward Highly Efficient Perovskite Solar Cells10.1002/anie.202424910 ↗
52. Elimination of Grain Surface Concavities for Improved Perovskite Thin‐Film Interfaces10.1038/s41560-024-01567-x ↗
53. A Supramolecular Approach to Improve the Performance and Operational Stability of All‐Perovskite Tandem Solar Cells10.1038/s41467-025-62391-9 ↗
54. Accelerated Aging of All‐Inorganic, Interface‐Stabilized Perovskite Solar Cells10.1126/science.abn5679 ↗
55. Stabilizing Grain Boundaries by In Situ Formation of Robust Layered Metallo‐Organic Complex Toward High‐Performance Inverted Perovskite Solar Cells10.1002/adma.202511124 ↗
56. Locking Surface Dimensionality for Endurable Interface in Perovskite Photovoltaics10.1002/cey2.718 ↗
57. Reduction of Nonradiative Recombination at Perovskite/C60 Interface in Inverted Perovskite Solar Cells10.1002/adma.202500501 ↗
58. Buried Interface Passivation of Perovskite Solar Cells by Atomic Layer Deposition of Al2O310.1021/acsenergylett.3c00296 ↗
59. Reinforced SnO2 Tensile‐Strength and ‘Buffer‐Spring’ Interfaces for Efficient Inorganic Perovskite Solar Cells10.1002/cey2.468 ↗
60. Toughened Self‐Assembled Monolayers for Durable Perovskite Solar Cells10.1038/s41586-025-09509-7 ↗
61. Fluorinated Epoxy for Tailoring PbI2 Residue in Perovskite Films to Realize Stable Perovskite Solar Cells With Fill Factor Over 87%10.1002/adfm.202510789 ↗
62. Locking Surface Dimensionality for Endurable Interface in Perovskite Photovoltaics10.1002/cey2.718 ↗
63. Boosting Efficiency to 22.73%: Unraveling the Role of Solvent Environment in Low‐Dimensional Perovskites Through Competitive Bonding Interactions10.1002/adfm.202415429 ↗
64. Tailoring Nanoscale Interfaces for Perovskite‐Perovskite‐Silicon Triple‐Junction Solar Cells10.1038/s41565-025-02015-x ↗