Copper ion liquid-like thermoelectrics
Source abstract
Abstract
Advanced thermoelectric technology offers a potential for converting waste industrial heat into useful electricity, and an emission-free method for solid state cooling. Worldwide efforts to find materials with thermoelectric figure of merit, zT values significantly above unity, are frequently focused on crystalline semiconductors with low thermal conductivity. Here we report on Cu(2-x)Se, which reaches a zT of 1.5 at 1,000 K, among the highest values for any bulk materials. Whereas the Se atoms in Cu(2-x)Se form a rigid face-centred cubic lattice, providing a crystalline pathway for semiconducting electrons (or more precisely holes), the copper ions are highly disordered around the Se sublattice and are superionic with liquid-like mobility. This extraordinary 'liquid-like' behaviour of copper ions around a crystalline sublattice of Se in Cu(2-x)Se results in an intrinsically very low lattice thermal conductivity which enables high zT in this otherwise simple semiconductor. This unusual combination of properties leads to an ideal thermoelectric material. The results indicate a new strategy and direction for high-efficiency thermoelectric materials by exploring systems where there exists a crystalline sublattice for electronic conduction surrounded by liquid-like ions.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Bell, L. E. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science 321, 1457–1461 (2008).10.1126/science.1158899 ↗
2. Snyder, G. J. & Toberer, E. S. Complex thermoelectric materials. Nature Mater. 7, 105–114 (2008).10.1038/nmat2090 ↗
3. Slack, G. A. in CRC Handbook of Thermoelectrics (ed. Rowe, D. M.) 407–440 (CRC, 1995).
4. Sales, B. C., Mandrus, D. & Williams, R. K. Filled skutterudite antimonides: A new class of thermoelectric materials. Science 272, 1325–1328 (1996).10.1126/science.272.5266.1325 ↗
5. Christensen, M. et al. Avoided crossing of rattler modes in thermoelectric materials. Nature Mater. 7, 811–815 (2008).10.1038/nmat2273 ↗
6. Poudel, B. et al. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320, 634–638 (2008).10.1126/science.1156446 ↗
7. Hsu, K. F. et al. Cubic AgPbmSbTe2+m: Bulk thermoelectric materials with high figure of merit. Science 303, 818–821 (2004).10.1126/science.1092963 ↗
8. Heremans, J. P. et al. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states. Science 321, 554–557 (2008).10.1126/science.1159725 ↗
9. Pei, Y. et al. Convergence of electronic bands for high performance bulk thermoelectrics. Nature 473, 66–69 (2011).10.1038/nature09996 ↗
10. Venkatasubramanian, R., Siivola, E., Colpitts, T. & O’Quinn, B. Thin film thermoelectric devices with high room-temperature figures of merit. Nature 413, 597–602 (2001).10.1038/35098012 ↗
11. Vineis, C. J., Shakouri, A., Majumdar, A. & Kanatzidis, M. G. Nanostructured thermoelectrics: Big efficiency gains from small features. Adv. Mater. 22, 3970–3980 (2010).10.1002/adma.201000839 ↗
12. Rhyee, J. et al. Peierls distortion as a route to high thermoelectric performance in In4Se3−δ crystals. Nature 459, 965–968 (2009).10.1038/nature08088 ↗
13. Pilgrim, W. C. & Morkel, C. State dependent particle dynamics in liquid alkali metals. J. Phys. Condens. Matter 18, R585–R633 (2006).10.1088/0953-8984/18/37/R01 ↗
14. Frenkel, J. in Kinetic Theory of Liquids (eds Fowler, R. H., Kapitza, P. & Mott, N. F.) 188–249 (Oxford Univ. Press, 1947).
15. Trachenko, K. Heat capacity of liquids: An approach from the solid phase. Phys. Rev. B 78, 104021 (2008).
16. Chrissafis, K., Paraskevopoulos, K. M. & Manolikas, C. Studying Cu2−xSe phase transformation through DSC examination. J. Therm. Anal. Cal. 84, 195–199 (2006).10.1007/s10973-005-7169-7 ↗
17. Skomorokhov, A. N., Trots, D. M., Knappb, M., Bickulova, N. N. & Fuess, H. Structural behaviour of β-Cu2−δSe (δ=0, 0.15, 0.25) in dependence on temperature studied by synchrotron powder diffraction. J. Alloys Compounds 421, 64–71 (2006).10.1016/j.jallcom.2005.10.079 ↗
18. Heyding, R. D. & Murry, R. M. The crystal structures of Cu1.8Se, Cu3Se2, α- and γCuSe, CuSe2, and CuSe2II. Can. J. Chem. 54, 841–848 (1976).10.1139/v76-122 ↗
19. Oliveria, M., McMullan, R. K. & Wuensch, B. J. Single crystal neutron diffraction analysis of the cation distribution in the high-temperature phases α−Cu2−xS, α−Cu2−xSe, and α−Ag2Se. Solid State Ion. 28-30, 1332–1337 (1988).10.1016/0167-2738(88)90382-7 ↗
20. Borchert, W. Gitterumwandlungen im System Cu2−xSe. Z. Kristallogr. 106, 5–24 (1945).10.1524/zkri.1945.106.1.5 ↗
21. Stevels, A. L. N. & Jellinek, F. Phase transformations in copper chalcogenides: I. The copper–selenium system. Recl. Trav. Chim. 90, 273–283 (1971).10.1002/recl.19710900307 ↗
22. Sorokin, G. P., Papshev, Yu. M. & Oush, P. T. Photoconductivity of Cu2S, Cu2Se, and Cu2Te. Sov. Phys. Solid State 7, 1810–1811 (1966).
23. Hampl, E. F. Jr & Grove, C. Thermoelectric composition, US patent 3,853,632 (1974).
24. Ohtani, T. et al. Physical properties and phase transitions of βCu2−xSe (0.20≤x≤0.25). J. Alloys Compounds 279, 136–141 (1998).10.1016/S0925-8388(98)00674-4 ↗
25. Chatov, V. A., Iorga, T. P. & Inglizyan, P. N. Ionic conduction and diffusion of copper in copper selenide. Fiz. Tekh. Poluprovodn. 14, 807–809 (1980).
26. Boyce, J. B. & Huberman, B. A. Superionic conductors: Transitions, structures, dynamics. Phys. Rep. 51, 189–265 (1979).10.1016/0370-1573(79)90067-X ↗
27. Takahashi, T., Yamamoto, O., Matsuyama, F. & Noda, Y. Ionic conductivity and coulometric titration of copper selenide. J. Solid State Chem. 16, 35–39 (1976).10.1016/0022-4596(76)90004-9 ↗
28. Kashida, S. & Akai, J. X-ray diffraction and electron microscopy studies of the room-temperature structure of Cu2Se. J. Phys. C 21, 5329–5336 (1988).10.1088/0022-3719/21/31/004 ↗
29. Slack, G. A. The thermal conductivity of nonmetallic crystals. Solid State Phys. 34, 1–71 (1979).10.1016/S0081-1947(08)60359-8 ↗
30. Capps, J., Drymiotis, F., Lindsey, S. & Tritt, T. M. Significant enhancement of the dimensionless thermoelectric figure of merit of the binary Ag2Te. Phil. Mag. Lett. 90, 677–681 (2010).10.1080/09500839.2010.495355 ↗
31. Gascoin, F. & Maignan, A. Order–disorder transition in AgCrSe2: A new route to efficient thermoelectrics. Chem. Mater. 23, 2510–2513 (2011).10.1021/cm200581k ↗
32. Chalfin, E., Lu, H. & Dieckmann, R. Cation tracer diffusion in the thermoelectric materials Cu3Mo6Se8 and ‘β-Zn4Sb3’. Solid State Ion. 178, 447–456 (2007).10.1016/j.ssi.2007.01.026 ↗
33. Snyder, G. J., Christensen, M., Nishibori, E., Caillat, T. & Iversen, B. B. Disordered zinc in Zn4Sb3 with phonon-glass and electron-crystal thermoelectric properties. Nature Mater. 3, 458–463 (2004).10.1038/nmat1154 ↗