journal article·2017-02-03

Modulation of electronic properties of tin oxide nanobelts via thermal control of surface oxygen defects

Timothy D Keiper, Jorge L Barreda, Jim P Zheng, Peng Xiong

Nanotechnology· Volume 28· Issue 5
Publisher page

Abstract

Abstract Nanomaterials made from binary metal oxides are of increasing interest because of their versatility in applications from flexible electronics to portable chemical and biological sensors. Controlling the electrical properties of these materials is the first step in device implementation. Tin dioxide (SnO 2 ) nanobelts (NB) synthesized by the vapor–liquid–solid mechanism have shown much promise in this regard. We explore the modification of devices prepared with single crystalline NBs by thermal annealing in vacuum and oxygen, resulting in a viable field-effect transistor (FET) for numerous applications at ambient temperature. An oxygen annealing step initially increases the device conductance by up to a factor of 10 5 , likely through the modification of the surface defects of the NB, leading to Schottky barrier limited devices. A multi-step annealing procedure leads to further increase of the conductance by approximately 350% and optimization of the electronic properties. The effects of each step is investigated systematically on a single NB. The optimization of the electrical properties of the NBs makes possible the consistent production of channel-limited FETs and control of the device performance. Understanding these improvements on the electrical properties over the as-grown materials provides a pathway to enhance and tailor the functionalities of tin oxide nanostructures for a wide variety of optical, electronic, optoelectronic, and sensing applications that operate at room temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Florida State University

Florida A&M University-Florida State University College of Engineering

Funding

National Science Foundation

References (49)

Show source-provided references
1. Semiconductor nanowire fabrication by bottom-up and top-down paradigms10.1021/cm300570n ↗
2. Nanoelectronics from the bottom up10.1038/nmat2028 ↗
3. Doping and electrical transport in silicon nanowires10.1021/jp0009305 ↗
4. High performance silicon nanowire field effect transistors10.1021/nl025875l ↗
5. Synthesis and fabrication of high-performance n-type silicon nanowire transistors10.1002/adma.200400472 ↗
6. SnO2: a comprehensive review on structures and gas sensors10.1016/j.pmatsci.2014.06.003 ↗
7. Detection of CO and O2 using tin oxide nanowire sensors10.1002/adma.200304889 ↗
8. Intrinsic characteristics of semiconducting oxide nanobelt field-effect transistors10.1063/1.2338754 ↗
9. Room-temperature low-power hydrogen sensor based on a single tin dioxide nanobelt10.1063/1.2217710 ↗
10. Study of sensitivity and response kinetics changes for SnO2 thin-film hydrogen sensors10.1016/j.ijhydene.2009.08.001 ↗
11. Mechanism and optimization of pH sensing using SnO2 nanobelt field effect transistors10.1021/nl801696b ↗
12. Nanowire nanosensors for highly sensitive and selective detection of biological and chemical species10.1126/science.1062711 ↗
13. An investigation of the mechanisms of electronic sensing of protein adsorption on carbon nanotube devices10.1021/ja038702m ↗
14. Functionalized SnO2 nanobelt field-effect transistor sensors for label-free detection of cardiac troponin10.1016/j.bios.2011.05.019 ↗
15. Application of nano-crystalline porous tin oxide thin film for CO sensing10.1016/S0925-4005(98)00272-X ↗
16. Metal oxide gas sensors: sensitivity and influencing factors10.3390/s100302088 ↗
17. Label-free single-molecule detection of DNA-hybridization kinetics with a carbon nanotube field-effect transistor10.1038/nnano.2010.275 ↗
18. Quasi-one-dimensional metal oxide materials—synthesis, properties and applications10.1016/j.mser.2006.04.002 ↗
19. Controlled growth and electrical properties of heterojunctions of carbon nanotubes and silicon nanowires10.1038/19941 ↗
20. Nanobelts of semiconducting oxides10.1126/science.1058120 ↗
21. Indium phosphide nanowires as building blocks for nanoscale electronic and optoelectronic devices10.1038/35051047 ↗
22. Dopability, intrinsic conductivity, and nonstoichiometry of transparent conducting oxides10.1103/PhysRevLett.98.045501 ↗
23. Applications and processing of transparent conducting oxides10.1557/mrs2000.147 ↗
24. Characteristics of flexible indium tin oxide electrode grown by continuous roll-to-roll sputtering process for flexible organic solar cells10.1016/j.solmat.2009.01.015 ↗
25. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
26. Transparent, conductive graphene electrodes for dye-sensitized solar cells10.1021/nl072838r ↗
27. Growth of oriented single-crystalline rutile TiO2 nanorods on transparent conducting substrates for dye-sensitized solar cells10.1021/ja8078972 ↗
28. Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells10.1038/nnano.2009.226 ↗
29. Some conduction properties of the oxides of cadmium and nickel10.1088/0370-1301/64/8/309 ↗
30. Defect structure and electronic donor levels in stannic oxide crystals10.1063/1.1662011 ↗
31. ZnO nanowire transistors10.1021/jp0452599 ↗
32. Field-effect transistors based on single semiconducting oxide nanobelts10.1021/jp0271054 ↗
33. High-temperature gravimetric study on nonstoichiometry and oxygen-adsorption of SnO210.1016/0022-4596(90)90240-X ↗
34. The role of tin oxide surface defects in determining nanonet fet response to humidity and photoexcitation10.1039/C3TC31713G ↗
35. Tin oxide nanowires, nanoribbons, and nanotubes10.1021/jp013214r ↗
36. Bulk-quantity synthesis and self-catalytic VLS growth of SnO2 nanowires by lower-temperature evaporation10.1016/S0009-2614(02)01949-8 ↗
37. Semiconductor nanowires: functional building blocks for nanotechnology10.1142/9789812560049_0007 ↗
38. Klein · 1985
39. Origin of low-temperature photoluminescence from SnO2 nanowires fabricated by thermal evaporation and annealed in different ambients10.1063/1.2201617 ↗
40. Direct role of surface oxygen vacancies in visible light emission of tin dioxide nanowires10.1063/1.3041775 ↗
41. Surface oxygen chemistry of a gas-sensing material: SnO2(101)10.1209/epl/i2003-10044-0 ↗
42. Role of defect states in magnetic and electrical properties of ZnO nanowires10.1063/1.4801937 ↗
43. Supersensitive, fast-response nanowire sensors by using schottky contacts10.1002/adma.201000278 ↗
44. Effect of H2O adsorption on the electrical transport properties of double-walled carbon nanotubes10.1016/j.carbon.2006.03.023 ↗
45. High-performance, hysteresis-free carbon nanotube field-effect transistors via directed assembly10.1063/1.2364461 ↗
46. Hysteresis caused by water molecules in carbon nanotube field-effect transistors10.1021/nl0259232 ↗
47. Metal oxide nanowire transistors10.1039/c2jm31679j ↗
48. ZnO nanowire field-effect transistor and oxygen sensing property10.1063/1.1836870 ↗
49. Charge trapping studies in SiO2 using high current injection from Si-rich SiO2 films10.1063/1.328317 ↗