journal article·2026-07-29

Inherent Photoluminescence-Enhanced Daytime Radiative Cooling by Highly Crystalline Cellulose Films

Tianqi Xu, Hao Yuan, Wenjing Liu, Fei Wang, Chaohao Huang, Teng Wang, Ying Cai, Jiawen Zhang, Lingmin Yi

ACS Applied Materials & Interfaces· Volume 18· Issue 29
Publisher page

Abstract

Abstract Frequent high-temperature weather imposes high demands on the performance of passive daytime radiative cooling (PDRC) materials. Natural cellulose is a sustainable raw material with promising PDRC performance based on its unique macromolecular structure and hierarchical aggregation structure. However, it is still a great challenge to improve the PDRC performance of regenerated cellulose materials. In this work, it is found that the high crystal structure of the regenerated cellulose film can enhance its photoluminescence (PL) capacity. This intrinsic PL behavior will enhance its PDRC performance through the photon conversion mechanism. By converting the absorbed ultraviolet band photons into visible light for emission effectively, the regenerated cellulose film presents a higher reflectivity in the visible light band and a higher cooling power. The regenerated cellulose film with a crystallinity of 73.71% can achieve an average reflectivity of 93.48% in the 0.3–2.5 μm waveband, which is 4.79% higher than that of the regenerated cellulose film without PL enhancement, thereby increasing the cooling power by 115.9%. This kind of highly crystalline cellulose film with high PDRC performance is expected to make contributions to energy conservation in cities under diverse climatic conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Radiative Heat Transfer Studies · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Zhejiang Sci-Tech University , , ,

Funding

National Natural Science Foundation of China · China Postdoctoral Science Foundation · Natural Science Foundation of Zhejiang Province

References (77)

Show source-provided references
1. Colossal Barocaloric Effects in Plastic Crystals10.1038/s41586-019-1042-5 ↗
2. Present and Future Energy Consumption of Buildings: Challenges and Opportunities towards Decarbonisation10.1016/j.prime.2021.100002 ↗
3. Rare-Earth-Free Mn3OFe20-xCuxAl50 Magnetocaloric Materials with Stable Cubic Cscl-type Structure for Room-temperature Refrigeration10.1002/adfm.202310047 ↗
4. Enhanced Cryogenic Magnetocaloric Effect from 4f-3d Exchange Interaction in B-Site Ordered Gd2CuTiO6 Double Perovskite Oxide10.1002/adfm.202409061 ↗
5. A Multi-material Cascade Elastocaloric Cooling Device for Large Temperature Lift10.1038/s41560-024-01537-3 ↗
6. Solid-State Refrigeration of Shape Memory Alloy-based Elastocaloric Materials: A Review Focusing on Preparation Methods, Properties and Development10.1016/j.rser.2023.113762 ↗
7. Origami Metamaterials Enable Low-Stress-Driven Giant Elastocaloric Effect10.1021/acsnano.3c09516 ↗
8. Realizing Overall Trade-off of Barocaloric Performances in 1-Bromoadamantane-Graphene Composites10.1016/j.jmst.2024.08.019 ↗
9. Driving Barocaloric Effects in a Molecular Spin-Crossover Complex at Low Pressures10.1021/jacs.2c01315 ↗
10. A Colossal Barocaloric Effect Induced by the Creation of a High-Pressure Phase10.1039/D2MH00905F ↗
11. Emerging Materials and Strategies for Passive Daytime Radiative Cooling10.1002/smll.202206145 ↗
12. Adaptive Thermal Radiation Design for Spacecraft Heat Dissipation10.1016/j.rineng.2025.106262 ↗
13. Pushing Radiative Cooling Technology to Real Applications10.1002/adma.202409738 ↗
14. A Radiative Cooling Structural Material10.1126/science.aau9101 ↗
15. Cover Shields for Sub-Ambient Radiative Cooling: A Literature Review10.1016/j.rser.2021.110959 ↗
16. Recent Advances in Spectrally Selective Daytime Radiative Cooling Materials10.1007/s40820-025-01771-8 ↗
17. Penguin-Inspired Janus Composite Film for Thermal Management Enabling Ultrahigh-Dynamic Broadband Microwave Modulation10.1002/adfm.75426 ↗
18. Colored Temperature-Adaptive Radiative Coating for All-Season Building Thermal Regulation10.1016/j.solmat.2026.114319 ↗
19. Consistent Assessment of the Cooling Performance of Radiative Cooling Materials10.1002/adfm.202307191 ↗
20. On the Development, Optical Properties and Thermal Performance of Cool Colored Coatings for The Urban Environment10.1016/j.solener.2006.08.005 ↗
21. Experimental Assessment of the Reflection of Solar Radiation from Facades of Tall Buildings to the Pedestrian Level10.3390/su14105781 ↗
22. Full Daytime Sub - ambient Radiative Cooling in Commercial-like Paints with High Figure of Merit10.1016/j.xcrp.2020.100221 ↗
23. Recent Advances in Fluorescence-Based Colored Passive Daytime Radiative Cooling for Heat Mitigation10.1007/s10765-024-03382-8 ↗
24. Creating an Eco-Friendly Building Coating with Smart Subambient Radiative Cooling10.1002/adma.201906751 ↗
25. Photoluminescent Radiative Cooling for Aesthetic and Urban Comfort10.1038/s41893-025-01657-y ↗
26. Photoluminescent Metal-organic Frameworks and Their Composites: Fundamentals, Applications, and Outlooks10.1016/j.ccr.2024.216358 ↗
27. Effects of Stokes Shift and Purcell Enhancement on Fluorescence-assisted Radiative Cooling10.1039/D2TA02259A ↗
28. Enhancing the Cooling Potential of Photoluminescent Materials Through Evaluation of Thermal and Transmission Loss Mechanisms10.1038/s41598-021-94354-7 ↗
29. Colored Radiative Cooling Coatings with Fluorescence10.1117/1.JPE.11.032104 ↗
30. Radiative Cooling of a Spin Ensemble10.1038/s41567-020-0872-2 ↗
31. Fluorescence-Enabled Colored Bilayer Subambient Radiative Cooling Coatings10.1002/adom.202303296 ↗
32. Optical Properties of the Polymeric Radiative Cooler with Embedded Nano/Micro-Particles10.1016/j.rser.2024.114556 ↗
33. Passive Radiative Cooling of Silicon Solar Modules with Photonic Silica Microcylinders10.1021/acsphotonics.2c01389 ↗
34. Controlled Combination of Phosphorescent and Fluorescent Materials to Exploit Energy-Saving Potential in the Built Environment10.1016/j.energy.2023.127333 ↗
35. A Novel Multifunctional Photonic Film for Colored Passive Daytime Radiative Cooling and Energy Harvesting10.1002/smll.202308661 ↗
36. A Colored Temperature-Adaptive Cloak for Year-Round Building Energy Saving10.1002/aenm.202402202 ↗
37. Solar-Driven Adaptive Radiative Cooling Coating with Polymer Carbon Dots-Enhanced Photoluminescence for Urban Skin10.1016/j.cej.2024.153262 ↗
38. All-Color Sub-ambient Radiative Cooling Based on Photoluminescence10.1021/acsphotonics.1c01648 ↗
39. Colored Daytime Radiative Cooling Textiles Supported by Semiconductor Quantum Dots10.1021/acsami.3c02418 ↗
40. Employing Photoluminescence to Rapidly Follow Aggregation and Dispersion of Cellulose Nanofibrils10.1039/D0AN00868K ↗
41. Surface Modification of Cellulose Nanocrystals towards New Materials Development10.1002/app.51555 ↗
42. Versatile and Recyclable Iridescent Cellulose Nanocrystal Composite for Passive Daytime Radiative Cooling10.1021/acsami.6c00092 ↗
43. Robust, Hydrophobic and Antimicrobial TiO2-Decorated Bamboo Cellulose Nanofiber Aerogel with Honeycomb Porous Structure for Highly Efficient Radiative Cooling10.1016/j.carbpol.2026.125215 ↗
44. Eco-Friendly Skin-Wrinkle-Inspired Micro-Nano Structured Cellulose Composite Fibers for Highly Efficient Daytime Radiative Cooling10.1021/acsnano.5c06103 ↗
45. Scalable, Flexible, and UV-Resistant Bacterial Cellulose Composite Film for Daytime Radiative Cooling10.1021/acsami.4c22615 ↗
46. Yao, J, Robust, Thermal Insulated Cellulose Porous Films for Durable and Efficient Radiative Cooling10.1016/j.carbpol.2026.125051 ↗
47. Cellulose Metamaterials with Hetero-Profiled Topology via Structure Rearrangement During Ball Milling for Daytime Radiative Cooling10.1002/adfm.202405903 ↗
48. Autofluorescence Spectroscopy for Quantitative Analysis of Cellulose Nanocrystals10.1039/D2NR04823J ↗
49. Nonconventional Luminophores: Characteristics, Advancements and Perspectives10.1039/D0CS01087A ↗
50. Clustering-triggered Emission of Cellulose and Its Derivatives10.1007/s10118-019-2215-2 ↗
51. Tunable Photoluminescence Properties of Cotton Fiber With Gradually Changing Crystallinity10.3389/fchem.2022.805252 ↗
52. Tunable Photoluminescence Properties of Microcrystalline Cellulose with Gradually Changing Crystallinity and Crystal Form10.1002/marc.202100321 ↗
53. Mechanism of Photoluminescence Properties of Lyocell Fibers Changing with Crystallinity10.1016/j.carbpol.2024.123185 ↗
54. Magneto-Responsive Chiral Optical Materials: Flow-Induced Twisting of Cellulose Nanocrystals in Patterned Magnetic Fields10.1021/acsnano.4c05320 ↗
55. Dynamically Controlled Iridescence of Cholesteric Cellulose Nanocrystal Suspensions Using Electric Fields10.1002/adma.201606208 ↗
56. Alignment of Cellulose Nanofibers: Harnessing Nanoscale Properties to Macroscale Benefits10.1021/acsnano.0c07613 ↗
57. Self-Assembly of Cellulose for Creating Green Materials with Tailor-made Manostructures10.1039/D1TB00339A ↗
58. Self-Assembling Hierarchical Flexible Cellulose Films Assisted by Electrostatic Field for Passive Daytime Radiative Cooling10.1016/j.cej.2022.138558 ↗
59. Rapid Dissolution of Cellulose in LiOH/Urea and NaOH/Urea Aqueous Solutions10.1002/mabi.200400222 ↗
60. From Wood to Textiles: Top-Down Assembly of Aligned Cellulose Nanofibers10.1002/adma.201801347 ↗
61. Crystal Transition from Na-Cellulose IV to Cellulose II Monitored Using Synchrotron X-ray Diffraction10.1016/j.carbpol.2010.08.006 ↗
62. Mechanism of Cellulose Gelation from Aqueous Alkali-Urea Solution10.1016/j.carbpol.2012.03.023 ↗
63. Solvent-Dependent Morphology and Anisotropic Microscopic Dynamics of Cellulose Nanocrystals Under Electric Fields10.1103/PhysRevE.103.032606 ↗
64. Electrical Conduction Mechanisms in Ethyl Cellulose Films under DC and AC Electric Fields10.3390/polym16050628 ↗
65. Electric Field-Driven Control of Cholesteric Cellulose Nanocrystal Orientation and Morphology10.1002/adom.202101659 ↗
66. Twist Elastic Constant of Chiral Nematic Cellulose Nanocrystals Determined by Tactoid Reconfiguration in Electric Field10.1016/j.carbpol.2024.122650 ↗
67. Cellulose I Crystallinity Estimation Using a Combination of Infrared Spectroscopy and Machine Learning Approaches10.1016/j.carbpol.2025.124210 ↗
68. The Assignment of IR Absorption Bands Due to Free Hydroxyl Groups in Cellulose10.1023/A:1018448109214 ↗
69. Hydrogen-Bonding-Induced Assembly of Aligned Cellulose Nanofibers into Ultrastrong and Tough Bulk Materials10.1039/C9TA11118B ↗
70. Lightweight, Anisotropic, Compressible, and Thermally-Insulating Wood Aerogels with Aligned Cellulose Fibers10.3390/polym12010165 ↗
71. Flexible and Transparent Polymer/Cellulose Nanocrystal Nanocomposites with High Thermal Conductivity for Thermal Management Application10.1002/app.48864 ↗
72. Molecular Dynamics Study of Cellulose Nanofiber Alignment under an Electric Field10.3390/polym14091925 ↗
73. Physical Insights into the High Radiative Cooling Power of Cellulose-Based Materials10.1039/D4CP04369C ↗
74. GLYCAM06: A Generalizable Biomolecular Force Field10.1002/jcc.20820 ↗
75. Comparison of Multiple Amber Force Fields and Development of Improved Protein Backbone Parameters10.1002/prot.21123 ↗
76. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
77. Hierarchical Cellulose Aerogel Reinforced with In Situ-Assembled Cellulose Nanofibers for Building Cooling10.1021/acsami.3c06178 ↗