An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Single-crystalline metal halide perovskite materials hold great promise for developing next-generation low-dose X-ray detection. To bring this new technology into reality, it is important to improve the durability of perovksite detectors by suppressing the well-known corrosion and ion diffusion problems at the perovskite/electrode interface. For imaging application, it is also imperative to develop new assembling approaches to realise non-planar interconnection between thick perovskite crystals and thin-film transistor (TFT) backplanes. Herein, a flexible and mechanically robust carbon nanotube (CNT) film was proposed to replace noble metal electrodes. The proposed CNT film, whose binder contains a carboxyl group, can form solid contact with a phenethylamine-based two-dimensional (2D) perovskite via amide coupling, thus toughening the perovskite-electrode interface. The resulting CNT/2D-3D perovskite detector shows an applaudable low dark current, high sensitivity, a low dose detection limit and excellent stability, retaining 98% of its initial sensitivity after storage for three months. Moreover, the flexible CNT films are also beneficial for making non-planar interconnection between thick perovskite crystals and TFT backplanes. The proposed flexible CNT thin film electrode thus provides a facile route towards realising a low-dose, high-resolution and highly stable perovskite X-ray detector.