Graphene-Promoted Adhesion-Reduced Expansion of Discontinuous Palladium Nanowires upon Hydrogenation

Monitoring conductivity changes of discontinuous palladium (Pd) nanostructures upon hydrogenation is becoming one of the most promising approaches toward hydrogen sensing. Development of sensors in this type has long been impeded due to strong ubiquitous interfacial adhesion which could distinctly restrict Pd expansion so as to hinder the closing of a nanogap. Herein, graphene underlayers were applied in the fabrication of nanogap-based hydrogen sensors to promote the lateral expansion of a Pd nanowire upon hydrogenation by reducing the adhesion between the metal and the substrate. In order to clarify details as well as mechanisms underlaid of graphene-enhanced Pd expansion, nanowire samples with serial lengths (6–48 μm) and gaps (0–260 nm in width) were controllably prepared on single-layer graphene (SLG), double-layer graphene (DLG), and quadruple-layer graphene (QLG, DLG × 2) via the combination of electron beam lithography (EBL) and electron beam deposition (EBD) technology. Response features and intrinsic analysis in physical sense of the graphene-based discontinuous Pd circuits upon hydrogen were established, in light of which the effects of underlayers on Pd expansion and on nanogap closing process were investigated. Such graphene-promoted expansion was demonstrated through the achievement of the closure of a large gap threshold (Gt) up to 260 nm as well as the systematical investigation of its influence on the sensing performance.