Site-Selective Synthesis of Bilayer Graphene on Cu Substrates Using Titanium as a Carbon Diffusion Barrier

Chemical vapor deposition (CVD) is a widely used method for graphene synthesis, but it struggles to produce large-area uniform bilayer graphene (BLG). This study introduces a novel approach to meet the demands of large-scale integrated circuit applications, challenging the conventional reliance on uniform BLG over extensive areas. We developed a unique method involving the direct growth of bilayer graphene arrays (BLGA) on Cu foil substrates using patterned titanium (Ti) as a diffusion barrier. The use of the Ti layer can effectively control carbon atom diffusion through the Cu foil without altering the growth conditions or compromising the graphene quality, thereby showcasing its versatility. The approach allows for targeted BLG growth and achieved a yield of 100% for a 10 × 10 BLG units array. Then a 10 × 10 BLG memristor array was fabricated, and a yield of 96% was achieved. The performances of these devices show good uniformity, evidenced by the set voltages concentrated around 4 V, and a high resistance state (HRS) to low resistance state (LRS) ratio predominantly around 10 7, reflecting the spatial uniformity of the prepared BLGA. This study provides insight into the BLG growth mechanism and opens new possibilities for BLG-based electronics.