In Situ Polymerized Quasi-Solid Electrolytes Compounded with Ionic Liquid Empowering Long-Life Cycling of 4.45 V Lithium–Metal Battery

High-voltage resistant quasi-solid-state polymer electrolytes (QSPEs) are promising for enhancing the energy density of lithium–metal batteries in practice. However, side reactions occurring at the interfaces between the anodes or cathodes and QSPEs considerably reduce the lifespan of high-voltage LMBs. In this study, a copolymer of vinyl ethylene carbonate (VEC) and poly(ethylene glycol) diacrylate (PEGDA) was used as the framework, with a cellulose membrane (CE) as the supporting layer. Based on density functional theory calculations, 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr 14 TFSI), an ionic liquid, was screened because of its lowest unoccupied molecular orbital energy level as a modifying agent for the in situ P(VEC x -EG y )/Pyr z /LiTFSI@CE QSPEs synthesis. Pyr 14 +, with a lithiophobic alkyl chain, forms a dense positive ion shielding layer on the protruding tips of deposited lithium, facilitating uniform and smooth lithium deposition. Pyr 14 TFSI assists in constructing a stable solid electrolyte interphase (SEI) layer on the Li surface enriched with LiF, Li 3 N, and RCOOLi. The modulation of lithium deposition behavior on the anode by Pyr 14 TFSI ensures stable Li plating/stripping for >1500 h. A Li–Cu cell exhibits stable cycling for >200 cycles at a current density of 0.05 mA cm –2, with an average Coulombic efficiency of 92.7%. In situ polymerization ensures that P(VEC x -EG y )/Pyr z /LiTFSI@CE QSPEs exhibit excellent interface compatibility with the anode and the cathode. The CR2032 button cell Li|P(VEC 1 -EG 0.06 )/Pyr 0.4 /LiTFSI@CE|LiCoO 2 demonstrates stable cycling with a negligible capacity decay of 0.083% per cycle for >390 cycles at 25 °C and 0.2 C when using a high-voltage LiCoO 2 (4.45 V) cathode. Furthermore, a 7.1 mAh pouch cell achieves stable charge–discharge cycles, confirming the pronounced stability of the as-fabricated QSPE at the interfaces of the high-voltage LiCoO 2 cathode and Li anode.