Source abstract
Abstract
Flexible endoscopes equipped with multimodal sensors offer an innovative minimally invasive approach to perioperative diagnosis and intraoperative ablation monitoring, addressing the limitations of conventional mechanical- and optical-based techniques. Over the years, various miniaturized sensors have been developed, providing essential insights through minimally invasive surgeries (MIS). Among them, tactile sensors hold significant potential to revolutionize the diagnosis of tissue malignancy, serving to detect differences in the mechanical properties between healthy and cancerous tissues. However, such differences are largely detectable only at late-stage malignancy. Sensing tissue electrical properties, such as bioelectrical impedance, offers a potentially better approach to distinguishing tissue abnormalities due to the pronounced differences between divergent tissues and over the course of tumor development. Nonetheless, the integration of impedance sensors with soft medical robots remains under explored due to the challenges in fabricating suitable electrode materials that offer low interfacial impedance when in contact with biotissues. This work developed a 3D conformal electronic device based on mesoporous gold (mAu) sensors, combining top-down lithography, bottom-up electrochemical deposition, and a liquid-assisted transfer printing technique. The mAu electrode platform exhibited an enhancement in impedance sensitivity of 2.5 times higher than that of flat gold, and the 3D configuration enables tissue impedance measurements on different sides of the device, highly beneficial for navigating soft robots and performing in situ diagnosis in hard-to-reach areas. In vitro human tissue studies confirmed that the sensors can distinguish cancerous from healthy tissues. These findings highlight the potential of 3D conformal mesoporous electronics for use in advanced soft robot-assisted minimally invasive procedures.
Source: openalex_inverted_index · Quality: baseline
Affiliations
School of Mechanical and Manufacturing Engineering
The University of New South Wales
Graduate School of Biomedical Engineering
Australian Institute of Bioengineering and Nanotechnology (AIBN) and School of Chemical Engineering
The University of Queensland
Arto Hardy Family Biomedical Innovation Hub
Chris O’Brien Lifehouse
School of Medical Sciences, Faculty of Medicine and Health
The University of Sydney
Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, Faculty of Engineering and Information Sciences, University of Wollongong, Squires Way, Fairy Meadow, Wollongong, New South Wales 2519, Australia
School of Engineering and Built Environment, Griffith University, Parklands Drive, Southport, Queensland 4222, Australia
Tyree Foundation Institute of Health Engineering
University of New South Wales
Funding
National Health and Medical Research Council · Australian Research Council