Enhanced Efficiency of Dye-Sensitized Solar Cells by Controlled Co-Adsorption Self-Assembly of Dyes

Single dyes typically exhibit limited light absorption in dye-sensitized solar cells (DSSCs). Thus, cosensitization using two or more dyes to enhance light-harvesting efficiency has been explored; however, the aggregation of dyes can adversely affect electron injection capabilities. This study focused on the design and synthesis of three dyes with a common carbazole donor for DSSCs: DZ102, TZ101, and JM102 . JM102 broadens the absorption spectrum by replacing the benzoic acid electron acceptor of TZ101 with acetylenic benzoic acid. A cosensitized DSSC device based on CO-1 [ DZ102: TZ101 = 1:1 (50 μM:50 μM)] achieved a short-circuit current density of 19.4 mA/cm 2 and a power conversion efficiency of 10.9%. For the first time, the molecular interactions between the dyes in the photoanode were demonstrated using cyclic voltammetry, which revealed the presence of intermolecular forces. Adsorption kinetics further indicated that these forces promoted the self-assembly of dyes during adsorption, which resulted in a cosensitization adsorption amount greater than the sum of the individual dye adsorptions. This study provides novel insights into the selection of cosensitizing dyes for DSSCs.