Silicon Distribution-Induced Actuation Film with Bidirectional Bending Deformation and Versatile Bionic Applications

As an important branch of intelligent materials, the research and development of stimulus-responsive flexible intelligent actuation materials is of great significance to promote the industrialization of intelligent materials. In this study, the asymmetric PVA-co-PE/silicon nanoparticle (PPSN) composite films and PVA-co-PE/silicon sol (PPSS) composite film with different silicon distributions were prepared by a simple spraying method. The silicon nanoparticle layer in the PPSN composite film was similar to the sand-like water-absorbing layer, which can quickly absorb water and permeate it into the interior region, leading to the hygroscopic expansion behavior on one side of the nanofiber film. Then, the PPSN composite film would quickly bend and deform to the silicon nanoparticle side. However, in the PPSS composite film, due to the excellent hygroscopicity and swelling characteristics of the silica sol layer, the composite film can be rapidly deformed to the PVA-co-PE nanofiber film side under moisture stimulation. The above results subvert the traditional asymmetric actuation film, which mainly depends on the hydrophilicity difference to determine the hygroscopic responsiveness and deformation direction, and ignore that the swelling degree is the main factor determining the bending direction of actuator. In addition, both the composite films can quickly respond to moisture stimulation (<1 s) and produce large-scale bending deformation (180°). Furthermore, due to the excellent interface adhesion formed by the continuity structure in the PPSS composite film, it has better actuation stability than the PPSN composite film. The excellent actuation characteristics and different bending directions of the PPSN and PPSS composite films make it a great application prospect in the field of bionics in the future.