journal article·2025-07Open access

Nanomechanical Properties and Application Potential of PbWO4 Crystals: Mechanical Behavior and Characterization

Mehmet Isik, Gozde Altuntas, Nizami Gasanly

Abstract

Abstract This study investigated the mechanical properties of a single crystal of lead tungstate (PbWO4) through nanoindentation measurements. The Oliver-Pharr method was used to determine the force-dependent Young’s modulus and hardness of PbWO4. As the applied force increased, the values of hardness and Young’s modulus decreased, which was attributed to the phenomenon known as the indentation size effect (ISE). The force-dependent data was analyzed using the proportional specimen resistance model, leading to a true hardness value of 2.87 GPa. By increasing the applied force from 5 to 100 mN, the Young’s modulus decreased from 82.0 to 71.1 GPa. The observed reduction in Young’s modulus is attributed to the formation of cracks within the material, which likely compromise its elastic response. The study also reported the contributions of plastic and elastic deformation components, revealing that plastic deformation was the dominant one. These results indicate that mechanical properties of PbWO4 make it a versatile material for technological applications in optoelectronics, photonics, radiation detection and scientific research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. P. Divya, R.A. Sujatha, N.A.L. Flower, G. Vinitha, and K.M. Rahulan: Opt. Mater., 2022, vol. 134, p. 113102.10.1016/j.optmat.2022.113102 ↗
2. B.G. Mullens, F.P. Marlton, M.K. Nicholas, A.J. Permana, M. Avdeev, S. Mukherjee, G. Vaitheeswaran, C. Li, J. Liu, P.A. Chater, and B.J. Kennedy: Inorg. Chem., 2024, vol. 63, pp. 11176–86.10.1021/acs.inorgchem.4c00866 ↗
3. S. Asha, M. Bakri, C. El Manna, S.S. Florence, V. Sarojini, C. Henry, and M.R. Bindhu: Particul Sci. Technol., 2023, vol. 41, pp. 474–83.10.1080/02726351.2022.2116374 ↗
4. M. Isik, N.M. Gasanly, N.H. Darvishov, and V.E. Bagiev: Phys. Scr., 2022, vol. 97, p. 045803.10.1088/1402-4896/ac576e ↗
5. S. Asha, C. Hentry, R. Gomati, M.R. Bindhu, M.K. Gatasheh, A.A. Hatamleh, and S. Arokiyaraj: J. Inorg. Organomet. Polym. Mater., 2024, vol. 34, pp. 485–500.10.1007/s10904-023-02791-w ↗
6. R.R. Karthieka, G.D. Venkatasubbu, and T. Prakash: Electron. Mater. Lett., 2022, vol. 18, pp. 304–12.10.1007/s13391-022-00339-7 ↗
7. M. Hosseinpour, H. Abdoos, O. Mirzaee, and S. Alamdari: Ceram. Int., 2023, vol. 49, pp. 4722–32.10.1016/j.ceramint.2022.09.362 ↗
8. G.B. Hiremath, M.M. Hosamani, V.P. Singh, N.H. Ayachit, and N.M. Badiger: J. Nucl. Eng. Radiat. Sci., 2023, vol. 9, p. 032004.10.1115/1.4056835 ↗
9. T.T.T. Chanu and N.R. Singh: J. Sol. State Chem., 2020, vol. 284, p. 121190.10.1016/j.jssc.2020.121190 ↗
10. T.T.T. Chanu and N.R. Singh: Mater. Res. Bull., 2019, vol. 112, pp. 314–22.10.1016/j.materresbull.2018.12.009 ↗
11. H.K. Sharma, R.K. Sharma, R.S. Saxena, and R. Prasad: J. Mater. Sci. Mater. El., 2022, vol. 33, pp. 21223–45.10.1007/s10854-022-08995-z ↗
12. K. Schmuck, M. Burtscher, M. Alfreider, M. Wurmshuber, and D. Kiener: JOM, 2024, vol. 76, pp. 2302–14.10.1007/s11837-023-06348-7 ↗
13. L. Montalto, F. Davi, V. Dormenev, N. Paone, and D. Rinaldi: Crystals, 2023, vol. 13, p. 556.10.3390/cryst13040556 ↗
14. D. Rinaldi, A. Ciriaco, M. Lebeau, and N. Paone: Nucl. Instrum. Meth. A, 2010, vol. 615, pp. 254–58.10.1016/j.nima.2010.01.075 ↗
15. W. Hong, Z. Zhi-Jun, Z. Jing-Tai, X. Jia-Yue, H. Guan-Qin, and L. Pei-Jun: Chin. Phys. Lett., 2010, vol. 27, p. 026101.10.1088/0256-307X/27/2/026101 ↗
16. R. Mukherjee and S. Misra: Phys. Chem. Miner., 2023, vol. 50, p. 10.10.1007/s00269-023-01235-8 ↗
17. Y.I. Golovin: Phys. Solid State, 2021, vol. 63, pp. 1–41.10.1134/S1063783421010108 ↗
18. M. Isik, N.M. Gasanly, and F.A. Rustamov: Mat. Sci. Semicon. Proc., 2022, vol. 140, p. 106389.10.1016/j.mssp.2021.106389 ↗
19. Md.I. Ahmad, G. Mohanty, L.R. Cambrea, D.C. Harris, K. Rajan, and M. Akinc: J. Cryst. Growth, 2012, vol. 343, pp. 115–21.10.1016/j.jcrysgro.2011.12.081 ↗
20. C. Tromasa, J. Colin, C. Coupeau, J.C. Girard, J. Woirgard, and J. Grilhe: Eur. Phys. J. AP, 1999, vol. 8, pp. 123–28.10.1051/epjap:1999237 ↗
21. S. Roa and M. Sirena: Physica B, 2022, vol. 633, p. 413773.10.1016/j.physb.2022.413773 ↗
22. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
23. G. Hu, Y. Wang, P. Xie, and Z. Pan: China particuology, 2004, vol. 2, pp. 241–47.10.1016/S1672-2515(07)60067-0 ↗
24. Y. Huang, C. Zhou, K. Chen, Y. Yang, J. Xiong, J. Yang, Y. Guo, G. Mao, L. Yang, F. Nie, X. Li, and Q. Zhou: Mater. Sci. Technol., 2023, vol. 39, pp. 1543–54.10.1080/02670836.2023.2173898 ↗
25. J.A. Khan, Y. Maithani, R.H. Horng, and J.P. Singh: Ceram. Int., 2022, vol. 48, pp. 27064–75.10.1016/j.ceramint.2022.06.018 ↗
26. T. Bond, A. Badmos, R.A. Ahmed, J.D. Obayemi, A. Salifu, N. Rahbar, and W.O. Soboyejo: Mater. Sci. Eng. A, 2022, vol. 839, p. 142542.10.1016/j.msea.2021.142542 ↗
27. H. Li and R.C. Bradt: J. Mater. Sci., 1993, vol. 28, pp. 917–26.10.1007/BF00400874 ↗
28. F. Wang, X. Li, Q. Xu, H. Chen, J. Xi, F. Zhang, Z. Tan, Y. Cheng, S. Wang, J. Xing, Q. Chen, and J. Zhu: J. Eur. Ceram. Soc., 2022, vol. 42, pp. 4196–4211.10.1016/j.jeurceramsoc.2022.03.044 ↗
29. A. Gunti, J. Das, and J. Non-Cryst: Solids, 2022, vol. 593, p. 121767.
30. D. Zhang and D.Y. Li: Phys. Scr., 2023, vol. 98, p. 095936.10.1088/1402-4896/acedd7 ↗
31. Y. Ma, W. Li, P. Dong, M. Yang, Y. He, S. Zheng, Z. Zhao, R. Zhang, Z. Zhang, and M. Li: Eur. Phys. J. Plus., 2022, vol. 137, p. 824.10.1140/epjp/s13360-022-02982-3 ↗
32. Q. Lin, S. Li, C. Feng, and X. Wang: Eng. Fract. Mech., 2021, vol. 246, p. 107627.10.1016/j.engfracmech.2021.107627 ↗
33. O. Sahin, O. Uzun, U. Kolemen, and N. Ucar: J. Phys. Condens. Matter, 2007, vol. 19, p. 306001.10.1088/0953-8984/19/30/306001 ↗
34. G.D. Quinn, P. Green, and K. Xu: J. Am. Ceram. Soc., 2003, vol. 86, pp. 441–48.10.1111/j.1151-2916.2003.tb03319.x ↗
35. F. Petit, V. Vandeneede, and F. Cambier: Mater. Sci. Eng. A. A, 2007, vol. 456, pp. 252–60.10.1016/j.msea.2006.11.109 ↗
36. O. Petrus, R. Sedlak, T. Csanadi, A. Naughton-Duszova, M. Vojtko, P. Hvizdos, and J. Dusza: Ceram. Int., 2023, vol. 49, pp. 24207–15.10.1016/j.ceramint.2022.11.185 ↗
37. A.R. Alao and L. Yin: Mater. Sci. Eng. A, 2015, vol. 628, pp. 181–87.10.1016/j.msea.2015.01.051 ↗
38. A.R. Alao: J. Mech. Behav. Biomed. Mater.Biomed. Mater., 2019, vol. 96, pp. 9–19.10.1016/j.jmbbm.2019.04.027 ↗
39. M. Sakai and Y. Nakano: J. Mater. Res., 2002, vol. 17, pp. 2161–73.10.1557/JMR.2002.0318 ↗
40. W. Zhang, H.Z. Song, Z. Zhang, H. Luo, Y. Jiang, X. Xie, C. Yao, L. Yuan, J. Deng, W. Hu, Q. Chen, H. Huang, Q. Dai, X. Hao, and Q. Liu: Ceram. Int., 2019, vol. 45, pp. 21751–58.10.1016/j.ceramint.2019.07.176 ↗