Ionic Cross-Linked MOF-Polymer Mixed-Matrix Membranes for Suppressing Interfacial Defects and Plasticization Behavior

To address the plasticization phenomenon and MOF-polymer interfacial defects, we report the synthesis of ionic cross-linked MOF MMMs from a dual brominated polymer and MOF components by using N, N ′-dimethylpiperazine as the cross-linker. We synthesized brominated MIL-101(Cr) nanoparticles by using mixed linkers and prepared brominated polyimide (6FDA-DAM-Br) to form ionic cross-linked MMMs. The gas permeation properties of the polyimide, ionic cross-linked MOF-polymer MMMs, and non-cross-linked MOF-polymer MMMs with various MOF weight loadings were investigated systematically to effectively understand the effects of MOF weight loading and ionic cross-linking. The ionic cross-linked 40 wt % MOF-polymer MMM exhibited significantly enhanced gas permeability with an H 2 permeability of 1640 Barrer and CO 2 permeability of 1981 Barrer and slightly decreased H 2 /CH 4, H 2 /N 2, CO 2 /CH 4 and CO 2 /N 2 selectivities of 16.9, 15.4, 20.5, and 18.6, respectively. The H 2 and CO 2 permeabilities are approximately 2–3 fold higher than those of the pure polyimide (6FDA-DAM) membrane. Moreover, the ionic cross-linked 40 wt % MOF-polymer MMM exhibited significantly increased resistance to plasticization. This is because the brominated MOF incorporation boosted molecular transport and polymer chain rigidity, and ionic cross-linking further reduced the number of interfacial defects and polymer chain mobility.