High-Performance Polyurea Improved by Reactive Nanocluster for Antibiofouling

Polyurea has found applications in protective coatings. Yet, the too fast polymerization and lack of functions limit its application. Herein, we report a high-performance polyurea via the stepwise polymerization of an isocyanate (NCO)-terminated prepolymer consisting of poly(propylene glycol)- block -poly(ethylene glycol)- block -poly(propylene glycol) (PPG- b -PEG- b -PPG) with a nanocluster synthesized via the hydrolysis of N -phenylaminomethyltriethoxysilane. Such a nanocluster contains low-reactivity secondary amines, so the polymerization of polyurea can be slowed down (over 1 h), which improves its wetting and adhesion to a substrate. The residual silanol groups on the nanocluster further increase the adhesion. Such polyurea exhibits high adhesion on various substrates, including glass, ceramic, steel, copper, titanium, wood, and natural rubber (∼2.35–14.64 MPa). Besides, the nanoclusters can cross-link the prepolymer into a tough network, endowing the polyurea with a high mechanical strength of ∼25 MPa, much higher than the traditional polyaspartic ester polyurea. On the other hand, the PEG segments enable the polyurea to have good fouling resistance against proteins (fibrinogen absorption was reduced by over 90%), bacteria (RBA of S. aureus E. coli and Pseudomonas sp. was less than 10%), as well as diatom (diatom density was less than 100 cells/mm 2 ). The polyurea is expected to find applications in biomedical engineering and marine antifouling.