journal article·2019-10-15Open access

A Review of Eutectic Au-Ge Solder Joints

Andreas Larsson, Torleif A. Tollefsen, Ole Martin Løvvik, Knut E. Aasmundtveit

Abstract

Gold-germanium (Au-Ge) joints have been part of the electronics industry since the birth of the solid state transistor. Today they find their role as a reliable joining technology, especially for high-temperature applications. This article is a literature study reviewing Au-Ge joints: Their uses, properties, material compatibility, application techniques, and performance characteristics. The review concludes that it is possible to create high-quality and very strong Au-Ge joints with a shear strength up to 150 MPa. They are stable and reliable, showing limited degradation after thousands of hours at high temperature and thousands of thermal cycles. Joints may be used in low-stress applications up to 300 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. AT&T Archives and History Center: AT&T Archives Genesis of the Transistor, AT&T Tech Channel, New York, 1965.
2. The Nobel Prize in Physics 1956: http://www.nobelprize.org/nobel_prizes/physics/laureates/1956/. Accessed 13 November 2018.
3. United States Patent Office, 3,025,439, 1962.
4. United States Patent Office, 3,200,490, 1965.
5. K. Nishitani, O. Ishihara, H. Sawano, T. Ishii, S. Mitsui, and H. Miki (1976) Jpn. J. Appl. Phys. 16, 93–7.10.7567/JJAPS.16S1.93 ↗
6. M.S. Islam and P.J. McNally: Microelectron. Eng., 1998, vol. 40, pp. 35–42.10.1016/S0167-9317(97)00184-6 ↗
7. 7 A.A. Iliadis, J.K. Zahurak, T. Neal, and W.T. Masselink: J. Electron. Mater., 1999, vol. 28, pp. 944–8.10.1007/s11664-999-0201-0 ↗
8. V. Chidambaram, H.B. Yeung, and G. Shan: Proc. Int. Symp. Phys. Fail. Anal. Integr. Circuits, IPFA, https://doi.org/10.1109/ipfa.2012.6306308.10.1109/ipfa.2012.6306308 ↗
9. V. Chidambaram, H.B. Yeung, and G. Shan: J. Electron. Mater., 2012, vol. 41, pp. 2107–17.10.1007/s11664-012-2114-6 ↗
10. P. Ning, R. Lai, D. Huff, F. Wang, K.D.T. Ngo, V.D. Immanuel, and K.J. Karimi: IEEE Trans. Power Electron., 2010, vol. 25, pp. 16–23.10.1109/TPEL.2009.2027324 ↗
11. M.J. Palmer, R.W. Johnson, and B.H. Ecedept: Int. High Temp. Electron., Santa Fe, NM, 2006.
12. W. Sabbah, S. Azzopardi, C. Buttay, R. Meuret, and E. Woirgard: Microelectron. Reliab., 2013, vol. 53, pp. 1617–21.10.1016/j.microrel.2013.07.101 ↗
13. V.R. Manikam and K.Y. Cheong: Components, Packag. Manuf. Technol. IEEE Trans., 2011, vol. 1, pp. 457–478.10.1109/TCPMT.2010.2100432 ↗
14. P. Zheng: Ph.D. dissertation, Dept. Electr. Comput. Eng., Auburn Univ., Auburn, AL, 2010.
15. A. Drevin-Bazin, F. Lacroix, and J.F. Barbot: J. Electron. Mater., 2014, vol. 43, pp. 695–701.10.1007/s11664-013-2718-5 ↗
16. S. Egelkraut, L. Frey, M. Knoerr, and A. Schletz: IEEE 12th Proc. Electron. Packag. Technol. Conf. (EPTC), Singapore, 2010, pp. 660–67.
17. P. Hagler, P. Henson, and R.W. Johnson: IEEE Trans. Ind. Electron., 2011, vol. 58, pp. 2673–82.10.1109/TIE.2010.2047832 ↗
18. A. Hutzler, A. Tokarski, S. Kraft, S. Zischler, and A. Schletz: IEEE Electron. Compon. Technol. Conf., Orlando, FL, 2014, pp. 1700–06.
19. F.L.F. Lang, S. Tanimoto, H. Ohashi, and H. Yamaguchi: 2009 Eur. Microelectron. Packag. Conf., 2009, pp. 3–7.
20. F. Lang, H. Yamaguchi, H. Ohashi, and H. Sato: J. Electron. Mater., 2011, vol. 40, pp. 1563–71.10.1007/s11664-011-1661-6 ↗
21. S. Msolli, O. Dalverny, J. Alexis, and M. Karama: Integr. Power Electron. Syst. (CIPS), 2010 6th Int. Conf., 2010, pp. 16–18.
22. L.A. Navarro, X. Perpina, P. Godignon, J. Montserrat, V. Banu, M. Vellvehi, and X. Jorda: IEEE Trans. Power Electron., 2014, vol. 29, pp. 2261–71.10.1109/TPEL.2013.2279607 ↗
23. V. Chidambaram, J. Hald, and J. Hattel: J. Alloys Compd., 2010, vol. 490, pp. 170–9.10.1016/j.jallcom.2009.10.108 ↗
24. V. Chidambaram, J. Hald, and J. Hattel: Microelectron. Reliab., 2009, vol. 49, pp. 323–30.10.1016/j.microrel.2008.12.012 ↗
25. H. Okamoto and T.B. Massalski: Bull. Alloy Phase Diagrams, 1984, vol. 5, pp. 601–10.10.1007/BF02868323 ↗
26. P. Godignon, X. Jorda, M. Vellvehi, X. Perpina, V. Banu, D. Lopez, J. Barbero, P. Brosselard, and S. Massetti: IEEE Trans. Ind. Electron., 2011, vol. 58, pp. 2582–9.10.1109/TIE.2010.2080252 ↗
27. L. Ma, X. Huang, and J. Zha: Int. Conf. Electron. Packag. Technol., 2013, pp. 946–49.
28. R. Kisiel and Z. Szczepański: Microelectron. Reliab., 2009, vol. 49, pp. 627–9.10.1016/j.microrel.2009.03.009 ↗
29. E. Maset, E. Sanchis-Kilders, J.B. Ejea, A. Ferreres, J. Jordán, V. Esteve, P. Brosselard, X. Jordà, M. Vellvehi, and P. Godignon: IEEE Trans. Device Mater. Reliab., 2009, vol. 9, pp. 557–62.10.1109/TDMR.2009.2029090 ↗
30. S. Tanimoto, K. Watanabe, H. Tanisawa, K. Matsui, and S. Sato: Electrochem. Soc. Meet., 224th, The Electrochemical Society, San Francisco, CA, 2013, p. 1.
31. S. Tanimoto, K. Matsui, Y. Murakami, H. Yamaguchi, and H. Okumura: in IMAPS Int. Conf. High Temp. Election. (HiTEC), IMAPS, Albuquerque, NM, 2010, pp. 32–9.10.4071/HITEC-STanimoto-TA16 ↗
32. V. Banu, P. Godignon, X. Jorda, M. Vellvehi, J. Millan, P. Brosselard, D. Lopez, and J. Barbero: Proc. Int. Semicond. Conf. CAS, 2010, vol. 2, pp. 397–400.
33. P. Godignon, X. Jorda, V. Banu, M. Vellvehi, J. Millan, P. Brosselard, D. Lopez, and J. Barbero: Power Semicond. Devices & IC’s (ISPSD), 2010 22nd Int. Symp., 2010, pp. 351–54.
34. F. Lang, H. Nakagawa, and H. Yamaguchi: Gold Bull., 2013, vol. 47, pp. 109–18.10.1007/s13404-013-0130-9 ↗
35. S. Tanimoto and K. Matsui: IEEE Trans. Electron Devices, 2015, vol. 62, pp. 258–69.10.1109/TED.2014.2359978 ↗
36. S. Tanimoto, H. Tanisawa, K. Watanabe, K. Matsui, and S. Sato: Mater. Sci. Forum, 2013, vol. 740–742, pp. 1040–3.10.4028/www.scientific.net/MSF.740-742.1040 ↗
37. R. Chanchani, C.D. Nordquist, R.H. Olsson, T. Peterson, R. Shul, C. Ahlers, T.A. Plut, and G.A. Patrizi: Proc. Electron. Components Technol. Conf., 2011, pp. 1604–09.
38. E.J. Schwalbach and P.W. Voorhees: Nano Lett., 2008, vol. 8, pp. 3739–45.10.1021/nl801987j ↗
39. Y.-C. Shih, M. Murakami, E.L. Wilkie, and A.C. Callegari: J. Appl. Phys., 1987, vol. 62, pp. 582–90.10.1063/1.339860 ↗
40. M. Pecht: Integrated Circuit, Hybrid, and Multichip Module Package Design Guidelines: A Focus on Reliability, John Wiley & Sons, Inc., New York, 1994.
41. M. Schwartz: Soldering - Understanding the Basics, ASM International, Materials Park, 2014.
42. J. Wang, C. Leinenbach, and M. Roth: J. Alloy. Compd., 2009, vol. 481, pp. 830–6.10.1016/j.jallcom.2009.03.114 ↗
43. E.S. Tasci, M.H.F. Sluiter, A. Pasturel, and N. Jakse: Phys. Rev. B, 2010, vol. 81, pp. 1–3.10.1103/PhysRevB.81.172202 ↗
44. L. Magagnin, R. Maboudian, and C. Carraro: J. Phys. Chem. B, 2002, vol. 106, pp. 401–7.10.1021/jp013396p ↗
45. D.G. Popescu and M.A. Husanu: Rapid Res. Lett., 2013, vol. 7, pp. 274–7.
46. D.G. Popescu and M. A. Husanu: Thin Solid Films, 2014, vol. 552, pp. 241–9.10.1016/j.tsf.2013.12.049 ↗
47. Y. Eichhammer, J. Roeck, N. Moelans, F. Iacopi, B. Blanpain, and M. Heyns: Arch. Met. Mater., 2008, vol. 53, pp. 1133–9.
48. A.P. Kryshtal, R. V. Sukhov, and A.A. Minenkov: J. Alloys Compd., 2012, vol. 512, pp. 311–5.10.1016/j.jallcom.2011.09.086 ↗
49. V. Chidambaram, E.P.J. Rong, G.C. Lip, and M.W.D. Rhee: Electron. Packag. Technol. Conf., IEEE, Singapore, 2013, pp. 202–07.
50. F.C. Campbell: Phase Diagrams - Understanding the Basics, ASM International, Ohio, 2012.10.31399/asm.tb.pdub.9781627083102 ↗
51. R.P. Elliott and F.A. Shunk: Bull. Alloy Phase Diagrams, 1980, vol. 1, pp. 51–4.10.1007/BF02881185 ↗
52. D. Olsen and H. Berg: IEEE Trans. Compon. Hybrids Manuf. Technol., 1979, vol. 2, pp. 257–63.10.1109/TCHMT.1979.1135450 ↗
53. M.F. Sousa, S. Riches, C. Johnston, and P.S. Grant: High Temp., 2010, pp. 1–6.10.4071/HITEC-MSousa-TA11 ↗
54. Z.W. Chen, J.K.L. Lai, and C.H. Shek: J. Phys. D. Appl. Phys., 2006, vol. 39, pp. 4544–8.10.1088/0022-3727/39/21/005 ↗
55. D. Lu and C.P. Wong, eds.: Materials for Advanced Packaging, Springer-Verlag New York Inc., 2009.
56. MIL-STD-202G, 2002.
57. V. Chidambaram, J. Hald, R. Ambat, and J. Hattel: Jom, 2009, vol. 61, pp. 59–65.10.1007/s11837-009-0089-4 ↗
58. G.O. Cook and C.D. Sorensen: J. Mater. Sci., 2011, vol. 46, pp. 5305–23.10.1007/s10853-011-5561-1 ↗
59. W.F. Gale and D.A. Butts: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 283–300.10.1179/136217104225021724 ↗
60. W.D. MacDonald and T.W. Eagar: Annu. Rev. Mater. Sci., 1992, vol. 22, pp. 23–46.10.1146/annurev.ms.22.080192.000323 ↗
61. W.D. MacDonald and T.W. Eagar: Met. Sci. Join., 1992, pp. 93–100.
62. W.D. MacDonald and T.W. Eagar: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 315–25.10.1007/s11661-998-0183-1 ↗
63. L. Bernstein: J. Electrochem. Soc., 1966, vol. 113, pp. 1282–8.10.1149/1.2423806 ↗
64. L. Bernstein and H. Bartholomew: Trans. Metall. Soc. Aime, 1966, vol. 236, pp. 405–12.
65. T.A. Tollefsen, A. Larsson, O.M. Løvvik, and K. Aasmundtveit: Metall. Mater. Trans. B , 2012, vol. 43, pp. 397–405.10.1007/s11663-011-9609-z ↗
66. T.A. Tollefsen, O.M. Løvvik, K. Aasmundtveit, and A. Larsson: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2914–6.10.1007/s11661-013-1725-8 ↗
67. K.E. Aasmundtveit, T.-T. Luu, H.-V. Nguyen, A. Larsson, and T.A. Tollefsen: Ind thjkjf jgjiof klfjefije. In: Intermetallic compounds - Formation and applications, M. Aliofkhazrai, ed., 1st edn., IntechOpen, London, 2018, pp. 43–72.
68. T.T. Luu, N. Hoivik, K. Wang, K.E. Aasmundtveit, and A.B. Vardøy: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5266–74.10.1007/s11661-015-3068-0 ↗
69. S.A. Paknejad and S.H. Mannan: Microelectron. Reliab., 2017, vol. 70, pp. 1–11.10.1016/j.microrel.2017.01.010 ↗
70. K.S. Siow: J. Electron. Mater., 2014, vol. 43, pp. 947–61.10.1007/s11664-013-2967-3 ↗