Modulation of Interfacial Characteristics of Copper Electrode by Electrodeposited Cu@Ti for High-Performance Anode-Free Zinc Ion Batteries

Preparation of the NC-Cu@Ti electrode involved electrochemical deposition of nanocrystalline copper on the surface of titanium foil using a constant potential method, intended for high stability anode-free zinc ion battery (ZIB) anode material applications. This paper examines the effect of Cu 2+ concentration in the electrodeposition solution on the structure and morphology of copper crystals on the NC-Cu@Ti electrode surface. The study also assesses how the interfacial properties of the NC-Cu@Ti electrode affect the process of anodic zinc deposition without anodic ZIBs. Our data suggest that with a voltage setting of −0.95 V and a copper ion concentration of 0.5 M in the solution, the deposition rate of copper crystals on the [email protected] electrode remains consistent. The resultant crystal phase surface appears smooth with a fine grain size. The [email protected] electrodes have increased hydrogen potentials and superior corrosion resistance; noting zinc nucleation sites at a mere 21.4 mV, it can provide stable electrochemical conditions for the zinc deposition interface of ZIBs and accelerate the process of zinc desolvation and nucleation. The constructed Zn// [email protected] asymmetric cell displays swift zinc deposition/stripping kinetics, elevated Coulombic efficiency, and prolonged stability (maintaining nearly 99% after 200 cycles). This performance significantly extends the service life relative to the Zn//Zn symmetric cell, which operates stably for 400 h at 1 mA/cm 2 . Moreover, the [email protected] //MnO 2 ZIBs offer enhanced conductivity and magnification performance to the pure zinc anode ZIBs. This study presents a novel approach for the low-cost and rapid preparation of anode materials for high-performance free-anode ZIBs.