In Situ Construction of a Polymer Coating Layer on the LiNi_0.8Co_0.1Mn_0.1O₂ Cathode for High-Performance Lithium-Ion Batteries

Lithium-ion batteries (LIBs) are known for their high energy density but exhibit poor cyclic stability and safety risks due to side reactions between the electrode and electrolyte. To address these issues, a novel approach involving construction of a polymer coating layer (PCL) via in situ self-polymerization using 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFBM) as an electrolyte additive on the cathode is proposed. The PCL endows the electrolyte with a high onset oxidation potential (4.78 V) and lithium-ion transference number (0.52). The uniform and robust in situ constructed PCL can effectively inhibit the severe irreversible side reactions and suppress harmful reactions, thus providing a protective barrier against degradation. The resulting Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 batteries exhibit an improved discharge capacity retention of 80% at 1C over 100 cycles. These results demonstrate that the in situ self-polymerization strategy holds promising potential for enhancing LIB performance and long-term stability, especially when high-voltage cathode materials are used.