Cyclic Plasma Halogenation of Amorphous Carbon for Defect-Free Area-Selective Atomic Layer Deposition of Titanium Oxide

As critical dimensions in integrated circuits continue to shrink, the lithography-based alignment of adjacent patterned layers becomes more challenging. Area-selective atomic layer deposition (ALD) allows circumventing the alignment issue by exploiting the chemical contrast of the exposed surfaces. In this work, we investigate the selective deposition of TiO2 by plasma halogenation of amorphous carbon (a-C:H) acting as a growth-inhibiting layer. On a-C:H, a CF4 or Cl2 plasma forms a thin halogenated layer that suppresses the growth of TiO2, while nucleation remains unaffected on plasma-treated SiO2. The same halogenating plasmas preferentially etch TiO2 nuclei over films and thus enable the restoration of the halogenated surface of amorphous carbon. By embedding the intermediate plasma treatments in the ALD TiO2 sequence, an 8 nm TiO2 layer could be deposited with a selectivity of 0.998. The application of the cyclic process on a 60 nm half-pitch line pattern resulted in the defect-free deposition of TiO2 at the bottom of the trenches. Cyclic fluorination demonstrated better growth inhibition compared to chlorination due to more efficient defect removal and retention of the favorable surface composition during plasma exposure. While exploring the TiO2 nucleation defects at the limit of detection for conventional elemental analysis techniques (<1 × 1014 at/cm2), we additionally highlight the value of imaging techniques such as atomic force microscopy for understanding defect formation mechanisms and accurately assessing growth selectivity.