Role of Oxygen in the Ti₃AlC₂ MAX Phase in the Oxide Formation and Conductivity of Ti₃C₂-Based MXene Nanosheets

Ti 3 C 2 T x MXene, a two-dimensional transition metal carbide, has attracted substantial interest due to its unique physical properties and a wide range of potential applications. Although the properties of devices using MXene have been substantially enhanced in recent years, it is not fully understood how the oxygen concentration in Ti 3 AlC 2 MAX affects oxide formation in Ti 3 C 2 -based MXene nanosheets and their fundamental properties. To this end, we compared two types of MAX phases: MAX with low oxygen content (LO-MAX) and MAX synthesized by a conventional process. Since the conventional MAX synthesis employs metal (Ti) as a primary material, it is referred to as metal-based MAX (MB-MAX) from here. The oxygen content of the LO-MAX was only 0.56 wt %, which was about 20% compared to that of MAX synthesized using conventional methods. We compared the properties of MXene nanosheets prepared from the LO-MAX with MXene nanosheets obtained from the MB-MAX. Microscopic and chemical analyses revealed smooth and wrinkle-free morphology and small amounts of oxygen in MXene nanosheets prepared from LO-MAX (LO-MXene). The LO-MXene nanosheet film exhibited an exceptionally high conductivity of 10,540 S/cm and an ultralow surface roughness of 1.7 nm, which originated from inhibited surface oxide formation. Moreover, the inhibition of oxide formation strengthened the function of −O or −OH groups on the surface of MXene, thereby facilitating strong hydrogen bonding to the polymer with hydroxyl groups. To clearly reveal these properties, we prepared a pressure sensor by coating these MXene nanosheets on nylon/polyester fibers. The fabricated sensor exhibited a high sensitivity of up to 85.6/kPa and excellent stretch stability and reliability. These results clearly revealed that lowering the oxygen content in MAX can make a decisive contribution to improving the fundamental properties of MXene nanosheets prepared therefrom.