Tailoring a Hybrid Functional Layer for Mg Metal Anodes in Conventional Electrolytes with a Low Overpotential

The development of high-voltage Mg metal batteries is hampered by the incompatibility between a Mg metal anode and conventional electrolyte, leading to a high overpotential for Mg plating/stripping processes. In this work, we tailored a hybrid functional layer consisting of Bi/MgCl2/polytetrahydrofuran (PTHF) by an in situ THF polyreaction during the reaction of the Mg anode with BiCl3 solution. The introduction of PTHF inhibits the growth of Bi particles and fills the layer interstice with MgCl2-containing PTHF, improving the structural integrity of the functional layer and insulation between the electrolyte and Mg anode. As a result, compared to a simply modified Bi/MgCl2 layer, the Bi/MgCl2/PTHF functional layer exhibits a lower polarization voltage of 0.25 V and longer cycling life of more than 2000 h at 0.1 mA cm–2. Mechanism analysis shows that Mg is plated on the surface of Bi particles within the layer. The Mo6S8/Mg full battery with the hybrid functional layer achieved a low voltage hysteresis of ∼0.25 V and long cycling life over 500 cycles at 50 mA g–1. This work provides a facile and effective hybrid functional layer strategy to realize Mg metal batteries in conventional electrolytes.