Biological Hair-Inspired AgNWs@Au-Embedded Nafion Electrodes with High Stability for Self-Powered Ionic Flexible Sensors

Ionic flexible sensors (IFS) usually consist of an ionomer matrix and two conductive electrodes, the failure of which mostly originates from interfacial debonding between matrix and electrode layers. To improve electrode’s adhesion and impedance matching with matrix, polymer binder or plasmonic heating technology is used to enhance the adhesion of electrodes, but there are technical challenges such as high resistance and harsh conditions. Herein, inspired by biological hair, we proposed a reliable and facile method to form AgNWs@Au-embedded Nafion flexible electrodes (AN FEs) for IFS without rigorous temperature and harsh conditions. Through integrating the spraying and electrodepositing Au method, we achieved that the AgNWs are partly embedded in the matrix layer for forming the embedded layer, similar to the root of biological hair, which is used to fix the FEs and collect the ion charges. The other parts of AgNWs exposed on the surface form the conductive mesh layer for transmitting the signal, analogous to the tip of biological hair. Compared with other AgNWs FEs, AN FEs exhibit high adhesion (∼358 kPa) and low sheet resistance (∼ 3.7 Ω/□), and high stabilities after 100 washing cycles, 200 s H2O2 corrosion or 1500s HCl corrosion. A self-powered IFS prepared by AN FEs can achieve dual sensing of mechanical strain and ambient humidity and still has promising sensing performance after being exposed to air for 2 months, which further indicates potential applications of the prepared FEs in next-generation multifunctional flexible electronic devices.