A Hybrid Ionic and Electronic Conductive Coating Layer for Enhanced Electrochemical Performance of 4.6 V LiCoO₂

The LiCoO2 cathode undergoes undesirable electrochemical performance when cycled with a high cut-off voltage (≥4.5 V versus Li/Li+). The unstable interface with poor kinetics is one of the main contributors to the performance failure. Hence, a hybrid Li-ion conductor (Li1.5Al0.5Ge1.5P3O12) and electron conductor (Al-doped ZnO) coating layer was built on the LiCoO2 surface. Characterization studies prove that a thick and conductive layer is homogeneously covered on LiCoO2 particles. The coating layer can not only enhance the interfacial ionic and electronic transport kinetics but also act as a protective layer to suppress the side reactions between the cathode and electrolyte. The modified LiCoO2 (HC-LCO) achieves an excellent cycling stability (77.1% capacity retention after 350 cycles at 1C) and rate capability (139.8 mAh g–1 at 10C) at 3.0–4.6 V. Investigations show that the protective layer can inhibit the particle cracks and Co dissolution and stabilize the cathode electrolyte interface (CEI). Furthermore, the irreversible phase transformation is still observed on the HC-LCO surface, indicating the phase transformation of the LiCoO2 surface may not be the main factor for fast performance failure. This work provides new insight of interfacial design for cathodes operating with a high cut-off voltage.