M13 Bacteriophage-Assisted Morphological Engineering of Crack-Based Sensors for Highly Sensitive and Wide Linear Range Strain Sensing

Despite their extraordinary mechanosensitivities, most channel-like crack-based strain sensors are limited by their poor levels of stretchability and linearity. This work presents a simple yet efficient way of modulating the cracking structure of thin metal films on elastomers to facilitate the development of high-performance wearable strain sensors. A net-shaped crack structure based on a thin platinum (Pt) film can be produced by coating an elastomer surface with M13 bacteriophages (phages) and consequently engineering the surface strain upon stretching. This process produces a Pt-on-phage (PoP) strain sensor that simultaneously exhibits high levels of stretchability (24%), sensitivity (maximum gauge factor ≈ 845.6 for 20–24%), and linearity (R2 ≈ 0.988 up to 20%). In addition, the sensor performance can be further modulated by either changing the phage coating volume or adding a silver nanowire coating to the PoP sensor film. The balanced strain-sensing performance, combined with fast response times and high levels of mechanical flexibility and operational stability, enables the devices to detect a wide range of human motions in real time after being attached to various body parts. Furthermore, PoP-based strain sensors can be usefully extended to detect more complex multidimensional strains through further strain engineering on a cross-patterned PoP film.