Facile and Powerful In Situ Polymerization Strategy for Sulfur-Based All-Solid Polymer Electrolytes in Lithium Batteries

All-solid-state polymer electrolytes can improve the safety of lithium batteries. However, the common Bellcore polymer electrolyte technology faces several issues such as wasting a mass of solvent, high manufacturing cost, and poor interfacial compatibility between polymer electrolytes and electrodes. Herein, we propose an in situ polymerization technique to synthesize all-solid-state polymer electrolytes by a thiol-Michael addition click reaction. The alternating copolymer is made from the Michael addition reaction of ethylene glycol dimethacrylate (EGDMA) and 1,2-ethane dithiol (EDT). At ambient temperature, the obtained composite polymer electrolyte displays an ionic conductivity of 3.02 × 10–5 S/cm, an electrochemical window of 4.5 V, and a lithium-ion transference number of 0.45. In light of this unique polymerization process, the traditional fabrication method of liquid electrolyte-based lithium batteries can be adopted in the current study for the preparation of all-solid-state Li/LiFePO4 batteries. It was found that the assembled all-solid-state Li/LiFePO4 batteries exhibited superior charging/discharging performance and preferable safety. Thus, this facile and powerful in situ polymerization strategy may open up a new approach for the design and fabrication of all-solid-state batteries with desirable performances.