Effect of Lithium Silicate Addition on the Microstructure and Crack Formation of LiNi_0.8Co_0.1Mn_0.1O₂ Cathode Particles

The microstructure of LiNi0.8Co0.1Mn0.1O2 cathode materials was controlled by the addition of lithium silicate, and the influence on the cycle performance and the rate capability was investigated. Si was not included within the lattice, but localized at the grain boundaries of the primary particles and the pores inside the secondary particles. The addition of the lithium silicate greatly decreased the density of the pores between the primary particles and improved the density of the secondary particles. The capacity retention was successfully improved for lithium silicate-added LiNi0.8Co0.1Mn0.1O2. When lithium silicate-free LiNi0.8Co0.1Mn0.1O2 was charged to 4.3 V, many cracks were formed along the grain boundaries even in the first cycle, while crack formation was remarkably inhibited for lithium silicate-added LiNi0.8Co0.1Mn0.1O2. Moreover, lithium silicate-added LiNi0.8Co0.1Mn0.1O2 particles were almost free from visible microcracks even after 100 cycles at the discharged state. These results suggest that the lithium silicate reinforces the grain-adhesion at the grain boundaries, inhibiting crack formation and electrolyte decomposition inside the cracks.