Influence of substrate bias voltage on crystallographic structure, optical and electronic properties of Al/(Ta 2 O 5 ) 0.85 (TiO 2 ) 0.15 /p-Si MIS Schottky barrier diodes fabricated by dc magnetron sputtering
Source abstract
Abstract
Thin films of (Ta2O5)(0.85)(TiO2)(0.15) were prepared on p-Si and quartz substrates by reactive magnetron sputtering and the influence of substrate bias voltage (V-b) on their structural and electrical properties was studied. The crystal structure of the prepared films was elucidated by X-ray diffraction (XRD) studies. The structure of the as deposited films was found to be amorphous and the surface roughness of the films was found to be low. The crystallinity of the films was observed to be improved by increasing the substrate bias voltage. The XPS results revealed that the composition of the films were nearly stoichiometric with V-b at 0 V and -150 V. The optical properties of the films at various substrate bias voltages were also studied. The optical band gap of the films formed at various V-b values from 0 to -150 V decreased from 4.49 to 4.39 eV as revealed from the optical transmission spectra. The fabricated Al/(Ta2O5)(0.85)(TiO2)(0.15)/p-Si metal-insulator-semiconductor (MIS) Schottky diodes leakage currents at -1.5 V decreased from 4.65 x 10(-6) A (unbiased) to 3.73 x 10(-8) A (V-b = -100 V). On the other hand, the sample biased at V-b = -150 V exhibited an increase in leakage current (2.99 x 10(-4) A) when compared to all other prepared samples. Furthermore, the electrical parameters such as Schottky barrier height and ideality factor were calculated for the Al/(Ta2O5)(0.85)(TiO2)(0.15)/p-Si MIS Schottky structure and systematically investigated as a function of substrate bias voltage using current-voltage (I-V) and capacitance- voltage (C-V) characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Temperature dependent current–voltage and capacitance–voltage characteristics of chromium Schottky contacts formed by electrodeposition technique on n-type Si10.1016/j.jallcom.2011.03.082 ↗
2. Electrical characterization of Al/MEH-PPV/p-Si Schottky diode by current–voltage and capacitance–voltage methods10.1016/j.physb.2006.04.012 ↗
3. Surface states and barrier height of metal‐ semiconductor systems10.1063/1.1702952 ↗
4. Identification of the fundamental vibrational modes of trigonal, α - monoclinic and amorphous selenium10.1016/0038-1098(67)90006-3 ↗
5. The deposition of nanocrystalline TiO2 thin film on silicon using Sol–Gel technique and its characterization10.1016/j.mee.2009.08.025 ↗
6. Processing and characterisation of sol–gel deposited Ta2O5 and TiO2–Ta2O5 dielectric thin films10.1016/S0038-1101(99)00031-3 ↗
7. Metal-insulator-SiC Schottky structures using HfO2 and TiO2 dielectrics10.1016/j.tsf.2016.11.053 ↗
8. Electroluminescence of SnO2∕p-Si heterojunction10.1063/1.2902299 ↗
9. Resistive switching characteristics of Al/Si3N4/p-Si MIS-based resistive switching memory devices10.3938/jkps.69.435 ↗
10. Physical and electrical properties of bilayer CeO2/TiO2 gate dielectric stack10.1016/j.mseb.2016.05.006 ↗
11. Preparation of mesoporous tantalum oxide and its enhanced photocatalytic activity10.1016/j.matlet.2010.09.027 ↗
12. Electrochromic switchable mirror foil with tantalum oxide thin film prepared by reactive DC magnetron sputtering in hydrogen-containing gas10.1016/j.surfcoat.2011.02.035 ↗
13. Comparison between the properties of amorphous and crystalline Ta2O5 thin films deposited on Si10.1016/S0026-2714(98)00218-2 ↗
14. Tantalum pentoxide (Ta2O5) thin films for advanced dielectric applications10.1016/S0927-796X(97)00023-5 ↗
15. Comparision of residual stress and optical properties in Ta2O5 thin films deposited by single and dual ion beam sputtering10.1016/j.mseb.2004.12.055 ↗
16. Enhancement of the dielectric constant of Ta2O5 through substitution with TiO210.1038/377215a0 ↗
17. Structural and electrical properties of crystalline (1-x)Ta2O5 -xTiO2 thin films fabricated by metal organic decomposition10.1016/S0169-4332(01)00844-3 ↗
18. Microstructure and optical properties of tantalum modified TiO2 thin films prepared by the sol–gel process10.1007/s10948-010-0717-9 ↗
19. Preliminary investigation of high-k materials–TiO2 doped Ta2O5 films by remote plasma ALD10.1016/j.phpro.2012.03.572 ↗
20. Effect of Ti doping on Ta2O5 stacks with Ru and Al gates10.1016/j.apsusc.2008.03.076 ↗
21. Dielectric property of (TiO2)x−(Ta2O5)1−x thin films10.1063/1.120746 ↗
22. Evaluation of microstructural and electrical properties of WO3−x thin films for p-Si/n-WO3−x/Ag junction diodes10.1016/j.ijleo.2016.08.079 ↗
23. Structural, Optical and electrical properties of DC reactive magnetron sputtered (Ta2O5)1−x(TiO2)x thin films10.1016/j.ceramint.2016.09.034 ↗
24. The effect of substrate temperature on physical and electrical properties of DC magnetron sputtered (Ta2O5)0.85(TiO2)0.15 films10.1088/1757-899X/34/1/012009 ↗
25. A study of piezoelectric orthorhombic Ta2O510.1557/JMR.1998.0062 ↗
26. Mechanisms of reactive sputtering of titanium nitride and titanium carbide III: influence of substrate bias on composition and structure10.1016/0040-6090(83)90320-6 ↗
27. Crystallization control of sputtered Ta2O5 thin films by substrate bias10.1063/1.1610247 ↗
28. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
29. Rhoderick · 1988
30. Performance of RF sputtered p-Si/n-ZnO nanoparticle thin film heterojunction diodes in high temperature environment10.1016/j.apsusc.2016.12.181 ↗
31. S.A. Yeriskin, M. Balbaşı and I. Orak, The effects of (graphene doped- PVA) interlayer on the determinative electrical parameters of the Au/n-Si (MS) structures at room temperature, J. Mater Sci: Mater. Electron., 〈http://dx.doi.org/10.1007/s10854-017-7255-1〉.10.1007/s10854-017-7255-1 ↗
32. Effect of layer thickness on electrical characterization of Ag/Si schottky diode fabricated by thermal evaporation technique10.1016/j.ijleo.2016.09.053 ↗
33. Current–voltage and capacitance–voltage characteristics of a Sn/methylene blue/p-Si Schottky diode10.1016/j.synthmet.2009.04.024 ↗
34. Properties of the organic-on-inorganic semiconductor barrier contact diodes In/PTCDI/p-Si and Ag/CuPc/p-Si10.1002/pssa.2211250138 ↗
35. Extraction of Schottky diode parameters from forward current-voltage characteristics10.1063/1.97359 ↗
36. A modified forward I‐V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
37. Current–voltage and capacitance–voltage characteristics of Al Schottky contacts to strained Si-on-insulator in the wide temperature range10.1016/j.mssp.2015.05.043 ↗
38. Temperature-dependent current–voltage characteristics of Er-silicide Schottky contacts to strained Si-on-insulator10.1016/j.jallcom.2012.12.143 ↗
39. The comparative electrical characteristics of Au/n- Si (MS) diodes with and without a 2% graphene cobalt-doped Ca3Co4Ga0.001Ox interfacial layer at room temperature10.1016/j.mee.2015.10.012 ↗
40. Fabrication and electrical characterization of nickel/p-Si Schottky diode at low temperature10.1016/j.solidstatesciences.2016.06.003 ↗
41. Analysis of the electrical characteristics of the Ag/ZnO Schottky barrier diodes on F-doped SnO2 glass substrates by pulsed laser deposition10.1016/j.mee.2011.12.009 ↗
42. Analysis of electrical properties of Al/p-Si Schottky contacts with and without rubrene layer10.1016/j.synthmet.2013.01.012 ↗