Influence of ammonia concentration on the structural, composition and optical properties of CdZnS thin films
Source abstract
Abstract
Abstract This paper is a systematic study on the effects of ammonia concentration on the morphology, structure, atomic percentage of major elements and optical properties of chemical bath deposition(CBD) Sulfur-zinc-cadmium (CdZnS) semiconductor thin films. By using Ultrahigh-Resolution Scanning Microscope (SEM) and when the ammonia concentration is 0.4 M, 0.5 M and 0.6 M, The CdZnS nanoparticles on the surface of the thin film, it is observed, exhibit better compactness and uniformity and the pores on it are less. With the increase of ammonia concentration, as it is shown in EDS, the content ratio of Zn to Cd in the thin films increased slightly at first and then decrease gradually. X-ray diffraction (XRD) studies show that the crystal structure of the thin film is always hexagonal phase with increasing ammonia concentration, and the crystallinity of the film is better with higher concentration of ammonia. A research is carried out with spectrophotometer on the optical properties of the thin film, and the results show that the highest transmittance of the sample is above 85%. With the increase of ammonia concentration, it is also found, the trend of the optical band gap of the thin film is consistent with the trend of the zinc content in the EDS measurement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Structural and temperature-dependent optical properties of thermally evaporated CdS thin films10.1016/j.mssp.2019.01.001 ↗
2. Serdar Ünlü, Synthesis and characterization of CdS window layers for PbS thin film solar cells, Materials10.1016/j.mssp.2018.10.011 ↗
3. Effect of substrate and Zn doping on the structural, optical and electrical properties of CdS thin films prepared by CBD method10.1016/j.jallcom.2016.08.298 ↗
4. Influence of Cd source concentration on photo-current response property of CdxZn1-xS film prepared by chemical bath deposition10.1016/j.ceramint.2015.10.047 ↗
5. Hydrothermal assisted chemical bath deposition of (Cd:Zn)S thin film with high photosensitivity and low dark current10.1016/j.solener.2018.05.075 ↗
6. Characterization of bilayer AZO film grown by low-damage sputtering for Cu(In,Ga)Se2 solar cell with a CBD-ZnS buffer layer10.1016/j.mssp.2018.03.008 ↗
7. Structural and optical characterization of wurtzite type ZnS10.1016/j.cap.2014.11.012 ↗
8. Cd1-xZnxS thin films with low Zn content obtained by an ammonia-free chemical bath deposition process10.1016/j.tsf.2013.10.024 ↗
9. Improved efficiency of Cu(In,Ga)Se2 thinfilm solar cells using a buffer layer alternative to CdS10.1016/j.solener.2018.12.023 ↗
10. Optical properties of Cd1-xZnxS thin films for CuInGaSe2 solar cell application10.1016/j.materresbull.2010.06.005 ↗
11. Influence of substrate temperature on the structural, optical and electrical properties of CdS thin films deposited by thermal evaporation10.1016/j.rinp.2013.08.003 ↗
12. Electrochemical atomic layer deposition of CdS on Ag single crystals: effects of substrate orientation on film structure10.1021/jp405637g ↗
13. Chemical bath deposition of CdS thin films doped with Zn and Cu10.1007/s12034-014-0642-9 ↗
14. Effects of ammonia concentration on property of Cd1xZnxS films by chemical bath deposition10.1016/j.mssp.2013.11.031 ↗
15. Influence of cadmium precursor concentrations on the structural, optical and electrochemical impedance properties of CdZnS thin films10.1016/j.vacuum.2018.11.041 ↗
16. Growth and characterization of ZnxCd1-xS nanoflowers by microwave-assisted chemical bath deposition10.1016/j.jallcom.2012.05.123 ↗